The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Eng, C. AU - Donetski, D. AU - Hulbert, S. AU - Liu, J. AU - Mazzoli, C. AU - Podobedov, B. ED - Jaski, Yifei ED - Den Hartog, Patric ED - Jaje, Kelly ED - Schaa, Volker R.W. TI - Mechanical Design of a Soft X-Ray Beam Position Monitor for the Coherent Soft X-Ray Scattering Beamline J2 - Proc. of MEDSI2020, Chicago, IL, USA, 24-29 July 2021 CY - Chicago, IL, USA T2 - Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation T3 - 11 LA - english AB - Achieving photon beam stability, a critical property of modern synchrotron beamlines, requires a means of high resolution, non-invasive photon beam position measurement. While such measurement techniques exist for hard x-ray beamlines, they have yet to be achieved for soft x-ray beamlines. A new soft X-ray beam position monitor (SXBPM) design based on GaAs detector arrays is being developed and will be installed in the first optical enclosure of the Coherent Soft X-ray Scattering (CSX) beamline at the National Synchrotron Light Source II (NSLS-II). The SXBPM assembly contains four water-cooled blade assemblies, each of which will have a GaAs detector assembly mounted within it, that can be inserted into the outer edges of the CSX undulator beam with sub-micron accuracy and resolution. The primary challenges in design of the SXBPM include: 1) mechanical stability of the assembly, 2) management of the heat load from the undulator x-ray beam to protect GaAs detector assemblies from unwanted illumination, 3) assembly compactness to fit within the first optical enclosure (FOE) of the CSX beamline, and 4) accessibility for modifications. Balancing the unique design requirements of the SXBPM along with their associated constraints has resulted in the design of a non-invasive beam position monitor which will be installed in the CSX FOE as a prototype for testing and iterative improvement. The ultimate goal is development of a widely useful SXBPM instrument for soft X-ray beamlines at high brightness synchrotron storage ring facilities worldwide. The following work seeks to present an overview of the current design of the SXBPM and an analysis of the challenges encountered and the proposed solutions by which they will be addressed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 56 EP - 58 KW - detector KW - undulator KW - photon KW - controls KW - synchrotron DA - 2021/10 PY - 2021 SN - 2673-5520 SN - 978-3-95450-229-5 DO - doi:10.18429/JACoW-MEDSI2020-MOPC01 UR - https://jacow.org/medsi2020/papers/mopc01.pdf ER -