LINAC2016 - List of Authors (Quigley, P.)

Paper	Title	Page
TUPLR010	Measurements and Analysis of Cavity Microphonics and Frequency Control in the Cornell ERL Main Linac Prototype Cryomodule	488
	M. Ge, N. Banerjee, J. Dobbins, R.G. Eichhorn, F. Furuta, G.H. Hoffstaetter, M. Liepe, P. Quigley, J. Sears, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	The Cornell Main Linac cryomodule (MLC) is a key component in the CBETA project. The SRF cavities with high loaded-Q in the MLC are very sensitive to microphonics from mechanical vibrations. Poor frequency stability of the cavities would dramatically increase the input RF power required to maintain stable accelerating fields in the SRF cavities. In this paper, we present detailed results from microphonics measurement for the cavities in the MLC, discuss dominant vibration sources, and show vibration damping results. The current microphonics level meets the CBETA requirement of a 36MeV energy gain without applying fast tuner compensation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR011	Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule	492
	F. Furuta, J. Dobbins, R.G. Eichhorn, M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	The main linac cryomodule (MLC) for the future energy-recovery linac (ERL) based X-ray light source at Cornell has been designed, fabricated, and tested. It houses six 7-cell SRF cavities with individual higher order-modes (HOMs) absorbers, cavity frequency tuners, and one magnet/BPM section. Cavities have achieved the specification values of 16.2MV/m with high-Q of 2.0·10¹⁰ in 1.8K in continuous wave (CW) mode. During initial MLC cavity testing, we encountered some field emission, reducing Q and lowering quench field. To overcome field emission and find optimal cool-down parameters, RF processing and thermal cycles with different cool-down conditions has been done. Here we report on these studies and present final results from the MLC cavity performance.
	Poster TUPLR011 [2.389 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR012	HOM Measurements for Cornell's ERL Main Linac Cryomodule	496
	F. Furuta, R.G. Eichhorn, M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, P. Quigley, V. Veshcherevich Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	The main linac cryomodule (MLC) for a future energy-recovery linac (ERL) based X-ray source at Cornell has been designed, fabricated, and tested. It houses six 7-cell SRF cavities with individual higher order-modes (HOMs) absorbers, cavity frequency tuners, and one magnet/BPM section. All HOMs in MLC have been scanned in 1.8K. The results show effective damping of HOMs, and also agree well with simulation results and the previous HOM scan results on one 7-cell cavity prototype test cryomodule. Here we present detailed results from these HOM studies.
	Poster TUPLR012 [2.773 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRC015	Cool-Down Performance of the Cornell ERL Cryomodules	802
	R.G. Eichhorn, F. Furuta, M. Ge, G.H. Hoffstaetter, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich, D. Widger Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	In the framework of the ERL prototyping, Cornell University has built two cryomodules, one injector module and one prototype Main Linac Cryomodule (MLC). In 2015, the MLC was successfully cooled down for the first time. We will report details on the cool-down as well as cycle tests we did in order to achieve slow and fast cool-down of the cavities. We will also report on the improvement we made on the injector cryomodule which also included a modification of the heat exchanger can that allows now a more controlled cool-down, too.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-THPRC015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Measurements and Analysis of Cavity Microphonics and Frequency Control in the Cornell ERL Main Linac Prototype Cryomodule

488

M. Ge, N. Banerjee, J. Dobbins, R.G. Eichhorn, F. Furuta, G.H. Hoffstaetter, M. Liepe, P. Quigley, J. Sears, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

The Cornell Main Linac cryomodule (MLC) is a key component in the CBETA project. The SRF cavities with high loaded-Q in the MLC are very sensitive to microphonics from mechanical vibrations. Poor frequency stability of the cavities would dramatically increase the input RF power required to maintain stable accelerating fields in the SRF cavities. In this paper, we present detailed results from microphonics measurement for the cavities in the MLC, discuss dominant vibration sources, and show vibration damping results. The current microphonics level meets the CBETA requirement of a 36MeV energy gain without applying fast tuner compensation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR011

Performance of the Novel Cornell ERL Main Linac Prototype Cryomodule

492

F. Furuta, J. Dobbins, R.G. Eichhorn, M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

The main linac cryomodule (MLC) for the future energy-recovery linac (ERL) based X-ray light source at Cornell has been designed, fabricated, and tested. It houses six 7-cell SRF cavities with individual higher order-modes (HOMs) absorbers, cavity frequency tuners, and one magnet/BPM section. Cavities have achieved the specification values of 16.2MV/m with high-Q of 2.0·10¹⁰ in 1.8K in continuous wave (CW) mode. During initial MLC cavity testing, we encountered some field emission, reducing Q and lowering quench field. To overcome field emission and find optimal cool-down parameters, RF processing and thermal cycles with different cool-down conditions has been done. Here we report on these studies and present final results from the MLC cavity performance.

Poster TUPLR011 [2.389 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR012

HOM Measurements for Cornell's ERL Main Linac Cryomodule

496

F. Furuta, R.G. Eichhorn, M. Ge, D. Gonnella, G.H. Hoffstaetter, M. Liepe, P. Quigley, V. Veshcherevich
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

The main linac cryomodule (MLC) for a future energy-recovery linac (ERL) based X-ray source at Cornell has been designed, fabricated, and tested. It houses six 7-cell SRF cavities with individual higher order-modes (HOMs) absorbers, cavity frequency tuners, and one magnet/BPM section. All HOMs in MLC have been scanned in 1.8K. The results show effective damping of HOMs, and also agree well with simulation results and the previous HOM scan results on one 7-cell cavity prototype test cryomodule. Here we present detailed results from these HOM studies.

Poster TUPLR012 [2.773 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRC015

Cool-Down Performance of the Cornell ERL Cryomodules

802

R.G. Eichhorn, F. Furuta, M. Ge, G.H. Hoffstaetter, M. Liepe, S.R. Markham, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich, D. Widger
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

In the framework of the ERL prototyping, Cornell University has built two cryomodules, one injector module and one prototype Main Linac Cryomodule (MLC). In 2015, the MLC was successfully cooled down for the first time. We will report details on the cool-down as well as cycle tests we did in order to achieve slow and fast cool-down of the cavities. We will also report on the improvement we made on the injector cryomodule which also included a modification of the heat exchanger can that allows now a more controlled cool-down, too.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-THPRC015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)