LINAC2016 - List of Authors (Perry, A.)

Paper	Title	Page
MOPLR050	Study and Development of CW Room Temperature Rebuncher for SARAF Accelerator	244
SPWR040	use link to see paper's listing under its alternate paper code
	B. Kaizer, Z. Horvitz, A. Perry, J. Rodnizki Soreq NRC, Yavne, Israel M. Di Giacomo, J.F. Leyge, M. Michel, P. Toussaint GANIL, Caen, France A. Friedman Ariel University, Ariel, Israel
	The SARAF 176 MHz accelerator is designed to provide CW proton/deuteron beams up to 5 mA current and 40 MeV accelerated ion energy. Phase I of SARAF (up to 4-5 MeV) has been installed, commissioned, and is available for experimental work. Phase II of SARAF is currently in the planning stage and will contain larger MEBT with three rebunchers and four cryomodules, each consisting of SC HWRs and solenoids. Phase II MEBT line is designed to follow a 1.3 MeV/u RFQ, is 4.5 m long, and contains three 176 MHz rebunchers providing a field integral of 10⁵ kV. Different rebuncher configurations have been studied in order to minimize the RF losses and maximize the shunt impedance. Different apertures have also been tested with a required of 40 mm diameter by beam dynamics. The simulations were done using CST Microwave Studio. CEA leads the design for SARAF phase II linac including the MEBT rebunchers and has studied a mixed solid copper and Cu plated stainless steel, 3-gap cavity. SNRC is developing a 4-gap OFHC copper rebuncher as a risk reduction. Both designs are presented and discussed in the paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOPLR050
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR068	Progress and Design Studies for the ATLAS Multi-User Upgrade	610
	B. Mustapha, P.N. Ostroumov ANL, Argonne, USA A. Perry Soreq NRC, Yavne, Israel
	Funding: This work was supported by the U.S. DOE Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357. This research used resources of ANL's ATLAS facility, a DOE Office of Science User Facility. The motivations and the concept for the multi-user upgrade of the ATLAS facility at Argonne were presented at recent conferences. With the near completion of the integration of the CARIBU-EBIS for more pure and efficient charge breeding of radioactive beams, more effort is being devoted to study the design options for a potential ATLAS mutli-user upgrade. The proposed upgrade will take advantage of the pulsed nature of the EBIS beams and the cw nature of ATLAS, in order to simultaneously accelerate beams with very close charge-to-mass ratios. In addition to enhancing the nuclear physics program, beam extraction at different points along the linac will open up the opportunity for other possible applications. Different beam injection and extraction schemes are being studied and will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH1A04	SARAF 4-Rods RFQ RF Power Line Splitting Design and Test	693
	J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, L. Weissman Soreq NRC, Yavne, Israel
	In the last years the SARAF 176 MHz 3.8 m long 4-rod RFQ accelerates routinely 2-4 mA CW proton beams to 1.5 MeV for basic studies in physics. However, it has not been successful in running CW deuteron beam for long periods. The findings imply that the RF coupler is the bottle neck to reach 250 kW CW dissipated power, equivalent to 65 kV inter-rod voltage, required to run the CW deuteron beam. A new design that splits the RFQ power between two couplers was built and commissioned successfully. A 3dB splitter and two new RF couplers were installed. The RF couplers improved design allows better brazing methods, vacuum properties and RF sealing. This design is innovative from two points of view: (a) implementation of two synchronized couplers located in two separated RF cells in a 4-rod RFQ. (b) The ability to run the RFQ in 200-250 kW to accelerate a 5 mA CW deuteron beam by 2.6 MV required for the new modulation design for 1.3 MeV/u. To our knowledge, SARAF RFQ will be the first 4-rod RFQ capable of running a CW deuteron beam at these power densities. This work may contribute to other 4-rod RFQ projects which intend to run CW beams in high dissipation power, like FRANZ and MYRRHA.
	Slides TH1A04 [6.109 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TH1A04
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPLR050

Study and Development of CW Room Temperature Rebuncher for SARAF Accelerator

244

SPWR040

use link to see paper's listing under its alternate paper code

B. Kaizer, Z. Horvitz, A. Perry, J. Rodnizki
Soreq NRC, Yavne, Israel
M. Di Giacomo, J.F. Leyge, M. Michel, P. Toussaint
GANIL, Caen, France
A. Friedman
Ariel University, Ariel, Israel

The SARAF 176 MHz accelerator is designed to provide CW proton/deuteron beams up to 5 mA current and 40 MeV accelerated ion energy. Phase I of SARAF (up to 4-5 MeV) has been installed, commissioned, and is available for experimental work. Phase II of SARAF is currently in the planning stage and will contain larger MEBT with three rebunchers and four cryomodules, each consisting of SC HWRs and solenoids. Phase II MEBT line is designed to follow a 1.3 MeV/u RFQ, is 4.5 m long, and contains three 176 MHz rebunchers providing a field integral of 10⁵ kV. Different rebuncher configurations have been studied in order to minimize the RF losses and maximize the shunt impedance. Different apertures have also been tested with a required of 40 mm diameter by beam dynamics. The simulations were done using CST Microwave Studio. CEA leads the design for SARAF phase II linac including the MEBT rebunchers and has studied a mixed solid copper and Cu plated stainless steel, 3-gap cavity. SNRC is developing a 4-gap OFHC copper rebuncher as a risk reduction. Both designs are presented and discussed in the paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOPLR050

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR068

Progress and Design Studies for the ATLAS Multi-User Upgrade

610

B. Mustapha, P.N. Ostroumov
ANL, Argonne, USA
A. Perry
Soreq NRC, Yavne, Israel

Funding: This work was supported by the U.S. DOE Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357. This research used resources of ANL's ATLAS facility, a DOE Office of Science User Facility.
The motivations and the concept for the multi-user upgrade of the ATLAS facility at Argonne were presented at recent conferences. With the near completion of the integration of the CARIBU-EBIS for more pure and efficient charge breeding of radioactive beams, more effort is being devoted to study the design options for a potential ATLAS mutli-user upgrade. The proposed upgrade will take advantage of the pulsed nature of the EBIS beams and the cw nature of ATLAS, in order to simultaneously accelerate beams with very close charge-to-mass ratios. In addition to enhancing the nuclear physics program, beam extraction at different points along the linac will open up the opportunity for other possible applications. Different beam injection and extraction schemes are being studied and will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TH1A04

SARAF 4-Rods RFQ RF Power Line Splitting Design and Test

693

J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, L. Weissman
Soreq NRC, Yavne, Israel

In the last years the SARAF 176 MHz 3.8 m long 4-rod RFQ accelerates routinely 2-4 mA CW proton beams to 1.5 MeV for basic studies in physics. However, it has not been successful in running CW deuteron beam for long periods. The findings imply that the RF coupler is the bottle neck to reach 250 kW CW dissipated power, equivalent to 65 kV inter-rod voltage, required to run the CW deuteron beam. A new design that splits the RFQ power between two couplers was built and commissioned successfully. A 3dB splitter and two new RF couplers were installed. The RF couplers improved design allows better brazing methods, vacuum properties and RF sealing. This design is innovative from two points of view: (a) implementation of two synchronized couplers located in two separated RF cells in a 4-rod RFQ. (b) The ability to run the RFQ in 200-250 kW to accelerate a 5 mA CW deuteron beam by 2.6 MV required for the new modulation design for 1.3 MeV/u. To our knowledge, SARAF RFQ will be the first 4-rod RFQ capable of running a CW deuteron beam at these power densities. This work may contribute to other 4-rod RFQ projects which intend to run CW beams in high dissipation power, like FRANZ and MYRRHA.

Slides TH1A04 [6.109 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TH1A04

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)