Author: Gerhard, P.
Paper Title Page
TUPLR057 Advanced Design Optimizations of a Prototype for a Newly Revised 4-Rod CW RFQ for the HLI at GSI 586
SPWR011   use link to see paper's listing under its alternate paper code  
 
  • D. Koser, H. Podlech
    IAP, Frankfurt am Main, Germany
  • P. Gerhard, L. Groening
    GSI, Darmstadt, Germany
  • O.K. Kester
    TRIUMF, Vancouver, Canada
 
  Within the scope of the FAIR project (Facility for Antiproton and Ion Research) at GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany, the front end of the existing High Charge State Injector (HLI) is upgraded for cw operation. The dedicated new 4-Rod RFQ structure is currently being designed at the Institute for Applied Physics (IAP) of the Goethe University of Frankfurt. The overall design is based on the RFQ structures that were originally developed for FRANZ* and MYRRHA**. Regarding the HLI-RFQ the comparatively low operating frequency of 108 MHz causes a general susceptibility towards mechanical vibrations especially concerning the electrodes because of the necessarily larger distance between the stems. Besides RF simulations and basic thermal simulations with CST Studio Suite, the key issues like mechanical electrode oscillations as well as temperature distribution from heat loss in cw operation are investigated with simulations using ANSYS Workbench. At first instance a dedicated 6-stem prototype is currently being manufactured in order to validate the simulated RF performance, thermal behavior and structural mechanical characteristics.
*M. Heilmann et al., A Coupled RFQ-IH Cavity for the Neutron Source FRANZ, IPAC13
**C. Zhang, H. Podlech, New Reference Design of the European ADS RFQ Accelerator For MYRRHA, IPAC14
 
poster icon Poster TUPLR057 [1.484 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR057  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TH2A03 Complete Transverse 4D Beam Characterization for Ions Beams at Energies of Few MeV/u 720
 
  • M.T. Maier, X. Du, P. Gerhard, L. Groening, S. Mickat, H. Vormann
    GSI, Darmstadt, Germany
 
  Measurement of the ion beam rms-emittances is done through determination of the second order beam moments. For time being the moments quantifying the amount of inter-plane coupling, as <xy'> for instance, have been accessible to measurements just for very special cases of ions at energies below 200 keV/u using pepperpots. This talk presents successful measurements of all inter-plane coupling moments at 1 to 11 MeV/u. From first principles the used methods are applicable at all ion energies. The first campaign applied skewed quadrupoles in combination with a regular slit/grid emittance measurement device. The second campaign used a rotatable slit/grid device in combination with regular quadrupoles.  
slides icon Slides TH2A03 [17.343 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TH2A03  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)