JACoW logo

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.


RIS citation export for TUPLR041: Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)

TY - CONF
AU - Podadera, I.
AU - Abramian, P.
AU - Brañas, B.
AU - Calero, J.
AU - Castellanos, J.
AU - García, J.M.
AU - Gavela, D.
AU - Guirao, A.
AU - Gutiérrez, J.L.
AU - Jiménez-Rey, D.
AU - Lafoz, M.
AU - López, D.
AU - Martínez, L.M.
AU - Molina Marinas, E.
AU - Mollá, J.
AU - Nomen, O.
AU - Oliver, C.
AU - Soleto, A.
AU - Toral, F.
AU - Varela, R.
AU - Villamayor, V.
ED - Yamazaki, Yoshishige
ED - Facco, Alberto
ED - McCausey, Amy
ED - Schaa, Volker RW
TI - Manufacturing, Assembly and Tests of the LIPAc Medium Energy Beam Transport Line (MEBT)
J2 - Proc. of LINAC2016, East Lansing, MI, USA, 25-30 September 2016
C1 - East Lansing, MI, USA
T2 - Linear Accelerator Conference
T3 - 28
LA - english
AB - LIPAc* will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology that will be used in the future IFMIF-DONES accelerator**. The acceleration of the beam will be carried out in two stages. An RFQ will increase the energy up to 5 MeV before a Superconducting RF (SRF) linac made of a chain of eight Half Wave Resonators bring the particles to the final energy. Between both stages, a Medium Energy Beam Transport line (MEBT)*** is in charge of transporting and matching the beam between the RFQ and the SRF. The transverse focusing of the beam is controlled by five quadrupole magnets with integrated steerers, grouped in one triplet and one doublet. Two buncher cavities surrounding the doublet handle the longitudinal dynamics. Two movable collimators are also included to purify the beam optics coming out the RFQ and avoid losses in the SRF. In this contribution, the final integrated design of the beamline will be shown, together with the auxiliaries. The manufacturing of all the components and the integration in the beamline will be depicted. The final tests carried out to the beamline prior to the installation in the accelerator will be also reported.
PB - JACoW
CP - Geneva, Switzerland
SP - 554
EP - 557
KW - vacuum
KW - SRF
KW - linac
KW - controls
KW - beam-transport
DA - 2017/05
PY - 2017
SN - 978-3-95450-169-4
DO - 10.18429/JACoW-LINAC2016-TUPLR041
UR - http://jacow.org/linac2016/papers/tuplr041.pdf
ER -