Author: Seimiya, Y.
Paper Title Page
MOPP077 Electron-Driven Positron Capture Simulation for ILC 233
 
  • Y. Seimiya, M. Kuriki
    HU/AdSM, Higashi-Hiroshima, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • T. Okugi, T. Omori, M. Satoh, J. Urakawa
    KEK, Ibaraki, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  
  ILC (International Linear Collider) is a next high-energy physics project to study the Higgs property as detail as possible and new phenomena beyond standard model. In ILC, the positron beam is produced by converting gamma rays from undulator radiations. To obtain gamma rays as undulator radiation, the electron beam for collision (150 GeV or more) is used. This positron generation scheme is a totally new approach. From project point of view, it is desirable to have a technical backup as a replacement of the undulator scheme. We propose an ILC positron source based on the conventional electron driven scheme. In this scheme, positron beam is generated from electromagnetic shower in a heavy target material where electron beam is injected. By manipulating the beam time structure to relax the heat load on the production target, the scheme can be feasible technically. In this study, positron capture in the electron driven scheme is simulated from the positron production to the positron damping ring, to demonstrate that an enough amount of positron can be generated and captured with a controllable heat load on the target.  
poster icon Poster MOPP077 [0.879 MB]  
 
TUPP075 The First Beam Recirculation and Beam Tuning in the Compact ERL at KEK 599
TUPOL01   use link to see paper's listing under its alternate paper code  
 
  • S. Sakanaka, M. Adachi, S. Adachi, M. Akemoto, D.A. Arakawa, S. Asaoka, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, X. Jin, E. Kako, Y. Kamiya, H. Katagiri, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondou, O.A. Konstantinova, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, N. Nakamura, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Obina, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sasaki, K. Satoh, M. Satoh, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, Y. Tanimoto, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida
    KEK, Ibaraki, Japan
  • E. Cenni
    Sokendai, Ibaraki, Japan
  • R. Hajima, S. Matsuba, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma
    JAEA, Ibaraki-ken, Japan
  • J.G. Hwang
    KNU, Deagu, Republic of Korea
  • M. Kuriki, Y. Seimiya
    HU/AdSM, Higashi-Hiroshima, Japan
  • A. Valloni
    CERN, Geneva, Switzerland
  
  Superconducting(SC)-linac-based light sources, which can produce ultra-brilliant photon beams in CW operation, are attracting worldwide attention. In KEK, we have been conducting R&D efforts towards the energy-recovery-linac(ERL)-based light source* since 2006. To demonstrate the key technologies for the ERL, we constructed the Compact ERL (cERL)** from 2009 to 2013. In the cERL, high-brightness CW electron beams are produced using a 500-kV photocathode DC gun. The beams are accelerated using SC cavities, transported through a recirculation loop, decelerated in the SC cavities, and dumped. In the February of 2014, we succeeded in accelerating and recirculating the CW beams of 4.5 micro-amperes in the cERL; the beams were successfully transported from the gun to the beam dump under energy recovery operation in the main linac. Then, precise tuning of beam optics and diagnostics of beam properties are under way. We report our experience on the beam commissioning, as well as the results of initial measurements of beam properties.
* N. Nakamura, IPAC2012, TUXB02.
** S. Sakanaka et al., IPAC2013, WEPWA015. 		 
 
TUPP078 High Gain FEL with a Micro-bunch Structured Beam by the Transverse-Longitudinal Phase Space Rotation 607
 
  • M. Kuriki, Y. Seimiya
    HU/AdSM, Higashi-Hiroshima, Japan
  • H. Hayano, K. Ohmi
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • R. Kato
    ISIR, Osaka, Japan
  
  FEL is one of the ideal radiation source over the wide range of wavelength region with a high brightness and a high coherence. Many methods to improve FEL gain has been proposed by introducing an active modulation on the bunch charge distribution. The transverse-longitudinal phase-space rotation is one of the promising method to realize the density modulation as the micro-bunch structure. Initially, a beam density modulation in the transverse direction made by a mechanical slit, is properly transformed into the density modulation in the longitudinal direction by the phase-space rotation. That results the longitudinal micro-bunch structure. The micro-bunch structure made with this method has a large tunability by changing the slit geometry, the beam line design, and the beam dynamics tuning. A compact FEL facility based on this method is proposed.  
poster icon Poster TUPP078 [0.594 MB]