LINAC2014 - List of Authors (Ruber, R.J.M.Y.)

Paper	Title	Page
MOPP023	X-band Technology for FEL Sources	101
MOPOL02	use link to see paper's listing under its alternate paper code
	G. D'Auria, S. Di Mitri, C. Serpico Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy E. Adli University of Oslo, Oslo, Norway A.A. Aksoy, Ö. Yavaş Ankara University, Accelerator Technologies Institute, Golbasi / Ankara, Turkey D. Angal-Kalinin, J.A. Clarke STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom C.J. Bocchetta, A.I. Wawrzyniak Solaris, Kraków, Poland M.J. Boland, T.K. Charles, R.T. Dowd, G. LeBlanc, Y.E. Tan, K.P. Wootton, D. Zhu SLSA, Clayton, Australia G. Burt Lancaster University, Lancaster, United Kingdom N. Catalán Lasheras, A. Grudiev, A. Latina, D. Schulte, S. Stapnes, I. Syratchev, W. Wuensch CERN, Geneva, Switzerland W. Fang, Q. Gu SINAP, Shanghai, People's Republic of China E.N. Gazis National Technical University of Athens, Athens, Greece M. Jacewicz, R.J.M.Y. Ruber, V.G. Ziemann Uppsala University, Uppsala, Sweden X.J.A. Janssen VDL ETG, Eindhoven, The Netherlands
	As is widely recognized, fourth generation Light Sources are based on FELs driven by Linacs. Soft and hard X-ray FEL facilities are presently operational at several laboratories, SLAC (LCLS), Spring-8 (SACLA), Elettra-Sincrotrone Trieste (FERMI), DESY (FLASH), or are in the construction phase, PSI (SwissFEL), PAL (PAL-XFEL), DESY (European X-FEL), SLAC (LCLS II), or are newly proposed in many laboratories. Most of the above mentioned facilities use NC S-band (3 GHz) or C-band (6 GHz) linacs for generating a multi-GeV low emittance beam. The use of the C-band increases the linac operating gradients, with an overall reduction of the machine length and cost. These advantages, however, can be further enhanced by using X-band (12 GHz) linacs that operate with gradients twice that given by C-band technology. With the low bunch charge option, currently considered for future X-ray FELs, X-band technology offers a low cost and compact solution for generating multi-GeV, low emittance bunches. The paper reports the ongoing activities in the framework of a collaboration among several laboratories for the development and validation of X-band technology for FEL based photon sources.

MOPP030	CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests	121
	J.L. Navarro Quirante, R. Corsini, W. Farabolini, D. Gamba, A. Grudiev, M.A. Khan, T. Lefèvre, S. Mazzoni, R. Pan, F. Peauger, F. Tecker, N. Vitoratou, K. Yaqub CERN, Geneva, Switzerland W. Farabolini, F. Peauger CEA/DSM/IRFU, France D. Gamba JAI, Oxford, United Kingdom M.A. Khan, K. Yaqub PINSTECH, Islamabad, Pakistan J. Ögren, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden N. Vitoratou Thessaloniki University, Thessaloniki, Greece
	The Compact Linear Collider (CLIC) project aims to accelerate and collide electrons and positrons up to 3 TeV center-of-mass energy using a novel two-beam acceleration concept. To prove the feasibility of this technology the CLIC Test Facility CTF3 has been operated during the last years. CALIFES (Concept d’Accélérateur Linéaire pour Faisceau d’Electron Sonde) is an electron linac hosted in the CTF3 complex, which provides a flexible electron beam and the necessary equipment to probe both the two-beam acceleration concept and novel instrumentation to be used in the future CLIC collider. In this paper we describe the CALIFES Linac and its beam characteristics, present recent test results, outline its future program on two-beam module testing and finally discuss about possible future applications as a multi-purpose accelerator technology test facility.

TUPP127	R&D of X-band Accelerating Structure for Compact XFEL at SINAP	715
	W. Fang, Q. Gu, M. Zhang, Z.T. Zhao SINAP, Shanghai, People's Republic of China A.A. Aksoy, Ö. Yavaş Ankara University, Accelerator Technologies Institute, Golbasi / Ankara, Turkey D. Angal-Kalinin, J.A. Clarke Cockcroft Institute, Warrington, Cheshire, United Kingdom C.J. Bocchetta, A.I. Wawrzyniak Solaris, Kraków, Poland M.J. Boland SLSA, Clayton, Australia G. D'Auria, S. Di Mitri, C. Serpico Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy T.J.C. Ekelöf, R.J.M.Y. Ruber, V.G. Ziemann Uppsala University, Uppsala, Sweden E.N. Gazis National Technical University of Athens, Athens, Greece A. Grudiev, A. Latina, D. Schulte, S. Stapnes, W. Wuensch CERN, Geneva, Switzerland
	One compact hard X-ray FEL facility is being planned at SINAP, and X-band high gradient accelerating structure is the most competetive scheme for this plan. X-band accelerating structure is designed to switch between 60MV/m and 80MV/m, and carries out 6GeV and 8GeV by 130 meters linac respectively. In this paper, brief layout of compact XFEL will be introduced, and in particular the prototype design of dedicated X-band acceleration RF system is also presented.

Paper

Title

Page

MOPP023

X-band Technology for FEL Sources

101

MOPOL02

use link to see paper's listing under its alternate paper code

G. D'Auria, S. Di Mitri, C. Serpico
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
E. Adli
University of Oslo, Oslo, Norway
A.A. Aksoy, Ö. Yavaş
Ankara University, Accelerator Technologies Institute, Golbasi / Ankara, Turkey
D. Angal-Kalinin, J.A. Clarke
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
C.J. Bocchetta, A.I. Wawrzyniak
Solaris, Kraków, Poland
M.J. Boland, T.K. Charles, R.T. Dowd, G. LeBlanc, Y.E. Tan, K.P. Wootton, D. Zhu
SLSA, Clayton, Australia
G. Burt
Lancaster University, Lancaster, United Kingdom
N. Catalán Lasheras, A. Grudiev, A. Latina, D. Schulte, S. Stapnes, I. Syratchev, W. Wuensch
CERN, Geneva, Switzerland
W. Fang, Q. Gu
SINAP, Shanghai, People's Republic of China
E.N. Gazis
National Technical University of Athens, Athens, Greece
M. Jacewicz, R.J.M.Y. Ruber, V.G. Ziemann
Uppsala University, Uppsala, Sweden
X.J.A. Janssen
VDL ETG, Eindhoven, The Netherlands

As is widely recognized, fourth generation Light Sources are based on FELs driven by Linacs. Soft and hard X-ray FEL facilities are presently operational at several laboratories, SLAC (LCLS), Spring-8 (SACLA), Elettra-Sincrotrone Trieste (FERMI), DESY (FLASH), or are in the construction phase, PSI (SwissFEL), PAL (PAL-XFEL), DESY (European X-FEL), SLAC (LCLS II), or are newly proposed in many laboratories. Most of the above mentioned facilities use NC S-band (3 GHz) or C-band (6 GHz) linacs for generating a multi-GeV low emittance beam. The use of the C-band increases the linac operating gradients, with an overall reduction of the machine length and cost. These advantages, however, can be further enhanced by using X-band (12 GHz) linacs that operate with gradients twice that given by C-band technology. With the low bunch charge option, currently considered for future X-ray FELs, X-band technology offers a low cost and compact solution for generating multi-GeV, low emittance bunches. The paper reports the ongoing activities in the framework of a collaboration among several laboratories for the development and validation of X-band technology for FEL based photon sources.

MOPP030

CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests

121

J.L. Navarro Quirante, R. Corsini, W. Farabolini, D. Gamba, A. Grudiev, M.A. Khan, T. Lefèvre, S. Mazzoni, R. Pan, F. Peauger, F. Tecker, N. Vitoratou, K. Yaqub
CERN, Geneva, Switzerland
W. Farabolini, F. Peauger
CEA/DSM/IRFU, France
D. Gamba
JAI, Oxford, United Kingdom
M.A. Khan, K. Yaqub
PINSTECH, Islamabad, Pakistan
J. Ögren, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
N. Vitoratou
Thessaloniki University, Thessaloniki, Greece

The Compact Linear Collider (CLIC) project aims to accelerate and collide electrons and positrons up to 3 TeV center-of-mass energy using a novel two-beam acceleration concept. To prove the feasibility of this technology the CLIC Test Facility CTF3 has been operated during the last years. CALIFES (Concept d’Accélérateur Linéaire pour Faisceau d’Electron Sonde) is an electron linac hosted in the CTF3 complex, which provides a flexible electron beam and the necessary equipment to probe both the two-beam acceleration concept and novel instrumentation to be used in the future CLIC collider. In this paper we describe the CALIFES Linac and its beam characteristics, present recent test results, outline its future program on two-beam module testing and finally discuss about possible future applications as a multi-purpose accelerator technology test facility.

TUPP127

R&D of X-band Accelerating Structure for Compact XFEL at SINAP

715

W. Fang, Q. Gu, M. Zhang, Z.T. Zhao
SINAP, Shanghai, People's Republic of China
A.A. Aksoy, Ö. Yavaş
Ankara University, Accelerator Technologies Institute, Golbasi / Ankara, Turkey
D. Angal-Kalinin, J.A. Clarke
Cockcroft Institute, Warrington, Cheshire, United Kingdom
C.J. Bocchetta, A.I. Wawrzyniak
Solaris, Kraków, Poland
M.J. Boland
SLSA, Clayton, Australia
G. D'Auria, S. Di Mitri, C. Serpico
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
T.J.C. Ekelöf, R.J.M.Y. Ruber, V.G. Ziemann
Uppsala University, Uppsala, Sweden
E.N. Gazis
National Technical University of Athens, Athens, Greece
A. Grudiev, A. Latina, D. Schulte, S. Stapnes, W. Wuensch
CERN, Geneva, Switzerland

One compact hard X-ray FEL facility is being planned at SINAP, and X-band high gradient accelerating structure is the most competetive scheme for this plan. X-band accelerating structure is designed to switch between 60MV/m and 80MV/m, and carries out 6GeV and 8GeV by 130 meters linac respectively. In this paper, brief layout of compact XFEL will be introduced, and in particular the prototype design of dedicated X-band acceleration RF system is also presented.