LINAC2014 - List of Authors (Kutsaev, S.V.)

Paper

Title

Page

Design of a Superconducting Quarter-Wave Resonator for eRHIC

49

S.V. Kutsaev, Z.A. Conway, M.P. Kelly, B. Mustapha, P.N. Ostroumov
ANL, Argonne, USA
S.A. Belomestnykh, I. Ben-Zvi
Stony Brook University, Stony Brook, USA
S.A. Belomestnykh, I. Ben-Zvi, Q. Wu, W. Xu
BNL, Upton, Long Island, New York, USA
B. P. Xiao
SBU, Stony Brook, New York, USA

Funding: Work is supported by Brookhaven Science Associates, LLC under contract No. DE-AC02-98CH10886 and by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357
The electron-ion collider project (eRHIC) at Brookhaven National Laboratory requires a 50 mA 12 MeV electron injector linac for eRHIC main linac and an SRF electron gun for a Coherent electron Cooling (CeC) linac. The necessity to deal with long electron bunches required for both the eRHIC injector and the coherent electron cooler sets the frequency requirement of 84.5 MHz. Quarter wave resonator is a perfect choice for this frequency because of its dimensions, RF parameters and good experience with manufacturing and using them at ANL. Here we present the design and optimization of an 84.5 MHz 2.5 MV superconducting quarter-wave cavity suitable for both machines. One such QWR will be used as a bunching cavity in the injector linac, the other one as the photoemission electron source for the CeC linac. In addition to the optimization of the QWR electromagnetic design we will discuss the tuner design, approaches to cavity fabrication and processing.

MOPP003

A Compact Linac Design for an Accelerator Driven System

52

B. Mustapha, S.V. Kutsaev, J.A. Nolen, P.N. Ostroumov
ANL, Argonne, USA

Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357.
A compact linac design has been developed for an Accelerator Driven System (ADS). The linac is under 150 meters in length and comprises a radio-frequency quadrupole (RFQ) and 20 superconducting modules. Three types of half-wave cavities and two types of elliptical cavities have been designed and optimized for high performance at frequencies of 162.5, 325 and 650 MHz. The lattice is being designed and optimized for operation with a peak power of 25 MW for a 25 mA – 1 GeV proton beam. The cavities RF design as well as the linac lattice will be presented along with end-to-end beam dynamics simulations for beam currents ranging from 0 to 25 mA.

WEIOB04

CW Heavy Ion Accelerator With Adjustable Energy for Material Science

780

S.V. Kutsaev, B. Mustapha, J.A. Nolen, P.N. Ostroumov
ANL, Argonne, USA

Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357
The proposed eXtreme MATerial (XMAT) research facility at ANL’s Advanced Photon Source (APS) combines medium-energy heavy-ion accelerator capability with the high-energy X-ray analysis to enable rapid in situ mesoscale bulk analysis of ion radiation damage in advanced materials and nuclear fuels. The XMAT facility requires CW heavy ion accelerator with adjustable beam energy in the range of 300 keV/u to 1.25 MeV/u. Such an accelerator has been developed and based on ECR, normal conducting RFQ and multi-gap quarter wave resonators (QWR) operating at 60 MHz. This talk will present complete 3D beam dynamics studies and multi-physics design of both RFQ and QWRs. The design includes a beam transport system capable to focus ions into 20-micron diameter spot on the target.

Slides WEIOB04 [1.159 MB]

Paper	Title	Page
MOPP002	Design of a Superconducting Quarter-Wave Resonator for eRHIC	49
	S.V. Kutsaev, Z.A. Conway, M.P. Kelly, B. Mustapha, P.N. Ostroumov ANL, Argonne, USA S.A. Belomestnykh, I. Ben-Zvi Stony Brook University, Stony Brook, USA S.A. Belomestnykh, I. Ben-Zvi, Q. Wu, W. Xu BNL, Upton, Long Island, New York, USA B. P. Xiao SBU, Stony Brook, New York, USA
	Funding: Work is supported by Brookhaven Science Associates, LLC under contract No. DE-AC02-98CH10886 and by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357 The electron-ion collider project (eRHIC) at Brookhaven National Laboratory requires a 50 mA 12 MeV electron injector linac for eRHIC main linac and an SRF electron gun for a Coherent electron Cooling (CeC) linac. The necessity to deal with long electron bunches required for both the eRHIC injector and the coherent electron cooler sets the frequency requirement of 84.5 MHz. Quarter wave resonator is a perfect choice for this frequency because of its dimensions, RF parameters and good experience with manufacturing and using them at ANL. Here we present the design and optimization of an 84.5 MHz 2.5 MV superconducting quarter-wave cavity suitable for both machines. One such QWR will be used as a bunching cavity in the injector linac, the other one as the photoemission electron source for the CeC linac. In addition to the optimization of the QWR electromagnetic design we will discuss the tuner design, approaches to cavity fabrication and processing.

MOPP003	A Compact Linac Design for an Accelerator Driven System	52
	B. Mustapha, S.V. Kutsaev, J.A. Nolen, P.N. Ostroumov ANL, Argonne, USA
	Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357. A compact linac design has been developed for an Accelerator Driven System (ADS). The linac is under 150 meters in length and comprises a radio-frequency quadrupole (RFQ) and 20 superconducting modules. Three types of half-wave cavities and two types of elliptical cavities have been designed and optimized for high performance at frequencies of 162.5, 325 and 650 MHz. The lattice is being designed and optimized for operation with a peak power of 25 MW for a 25 mA – 1 GeV proton beam. The cavities RF design as well as the linac lattice will be presented along with end-to-end beam dynamics simulations for beam currents ranging from 0 to 25 mA.

WEIOB04	CW Heavy Ion Accelerator With Adjustable Energy for Material Science	780
	S.V. Kutsaev, B. Mustapha, J.A. Nolen, P.N. Ostroumov ANL, Argonne, USA
	Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357 The proposed eXtreme MATerial (XMAT) research facility at ANL’s Advanced Photon Source (APS) combines medium-energy heavy-ion accelerator capability with the high-energy X-ray analysis to enable rapid in situ mesoscale bulk analysis of ion radiation damage in advanced materials and nuclear fuels. The XMAT facility requires CW heavy ion accelerator with adjustable beam energy in the range of 300 keV/u to 1.25 MeV/u. Such an accelerator has been developed and based on ECR, normal conducting RFQ and multi-gap quarter wave resonators (QWR) operating at 60 MHz. This talk will present complete 3D beam dynamics studies and multi-physics design of both RFQ and QWRs. The design includes a beam transport system capable to focus ions into 20-micron diameter spot on the target.
	Slides WEIOB04 [1.159 MB]