LINAC2014 - List of Authors (Hara, H.)

Paper	Title	Page
THPP099	Status of Superconducting Cavity and Cryomodule Development at MHI	1084
	T. Yanagisawa, H. Hara, N. Ikeda, K. Sennyu MHI, Hiroshima, Japan
	MHI's activities for ｓuperconducting accelerator are reported. MHI had developed several procedure and method of ILC cavity production for stable quality and cost reduction. And we had fabricated and installed cryomodules for ILC and ERL R&D. These activities are reported in detail.

THPP100	Result of MHI 2-Cell Seamless Dumb-Bell Cavity Vertical Test	1087
	K. Okihira, H. Hara, N. Ikeda, F. Inoue, K. Sennyu MHI, Hiroshima, Japan R.L. Geng, R.A. Rimmer JLab, Newport News, Virginia, USA E. Kako KEK, Ibaraki, Japan
	MHI have supplied several 9-cell cavities for STF (R&D of ILC project at KEK) and have been considering production method for stable quality and cost reduction, seamless dumb-bell cavity was one of them. We had fabricated a 2 cell seamless dumb-bell cavity for cost reduction and measured RF performance in collaboration with JLab, KEK and MHI. Surface treatment recipe for ILC was applied for MHI 2-cell cavity and vertical test was performed at JLab. The cavity reached Eacc=32.4MV/m after BCP and EP. Details of the result are reported.

Paper

Title

Page

Status of Superconducting Cavity and Cryomodule Development at MHI

1084

T. Yanagisawa, H. Hara, N. Ikeda, K. Sennyu
MHI, Hiroshima, Japan

MHI's activities for ｓuperconducting accelerator are reported. MHI had developed several procedure and method of ILC cavity production for stable quality and cost reduction. And we had fabricated and installed cryomodules for ILC and ERL R&D. These activities are reported in detail.

THPP100

Result of MHI 2-Cell Seamless Dumb-Bell Cavity Vertical Test

1087

K. Okihira, H. Hara, N. Ikeda, F. Inoue, K. Sennyu
MHI, Hiroshima, Japan
R.L. Geng, R.A. Rimmer
JLab, Newport News, Virginia, USA
E. Kako
KEK, Ibaraki, Japan

MHI have supplied several 9-cell cavities for STF (R&D of ILC project at KEK) and have been considering production method for stable quality and cost reduction, seamless dumb-bell cavity was one of them. We had fabricated a 2 cell seamless dumb-bell cavity for cost reduction and measured RF performance in collaboration with JLab, KEK and MHI. Surface treatment recipe for ILC was applied for MHI 2-cell cavity and vertical test was performed at JLab. The cavity reached Eacc=32.4MV/m after BCP and EP. Details of the result are reported.