LINAC2014 - List of Authors (Crisp, J.L.)

Paper

Title

Page

MSU RE-Accelerator ReA3 0.085 QWR Cryomodule Status

155

T. Xu, B. Bird, F. Casagrande, J.L. Crisp, K.D. Davidson, C. Dudley, A. Facco, P.E. Gibson, I. Grender, L. Hodges, K. Holland, M.J. Johnson, S. Jones, B. Laumer, D. Leitner, A. Mccartney, S.J. Miller, D. Morris, S. Nash, J.P. Ozelis, J. Popielarski, L. Popielarski, R. Rosas, R.J. Rose, K. Saito, M. Thrush, R. Walker, J. Wei, W. Wittmer, Y. Xu
FRIB, East Lansing, Michigan, USA
B. Arend, J. Ottarson, D.P. Sanderson, D. Wahlquist, J. Wenstrom
NSCL, East Lansing, Michigan, USA
M. Leitner
LBNL, Berkeley, California, USA

ReA3 β=0.085 QWR cryomodule is the third cryomodule for the superconducting LINAC of ReA3 reaccelerated beam facility, which will bring the maximum beam energy to 3 MeV/u for heavy ions. This cryomodule consists of 8 β=0.085 QWR cavities and 3 9T superconducting solenoids and operates at 4K. Qualification of cavities and FPCs and the construction of cold mass was completed in 2013. The installation of the module was completed this summer. Functioning not only as an important part of the ReA3 facility, cryomodule 3 also serves as a test bed for FRIB driver Linac and demonstrated the technology needed for FRIB CMs. Here we report the construction, installation and testing of the β=0.085 cryomodule and the development of the critical components.
Project funded by Michigan State University

THIOA02

Superconducting RF Development for FRIB at MSU

790

K. Saito, N.K. Bultman, E.E. Burkhardt, F. Casagrande, S.K. Chandrasekaran, S. Chouhan, C. Compton, J.L. Crisp, K. Elliott, A. Facco, A.D. Fox, P.E. Gibson, M.J. Johnson, G. Kiupel, R.E. Laxdal, M. Leitner, S.M. Lidia, I.M. Malloch, D. Miller, S.J. Miller, D. Morris, D. Norton, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, A.P. Rauch, R.J. Rose, T. Russo, S. Shanab, M. Shuptar, S. Stark, N.R. Usher, G.J. Velianoff, D.R. Victory, J. Wei, G. Wu, X. Wu, T. Xu, T. Xu, Y. Yamazaki, Q. Zhao, Z. Zheng
FRIB, East Lansing, Michigan, USA

Funding: *This material is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661.
FRIB is a $730M heavy ion accelerator project and a very large scale machine for many nuclear physics users. The civil construction started on March 17th 2014. The SRF system design and development have completed. The machine is to be in early completion end of 2019. FRIB accelerates ion species up to 238U with energies of no less than 200MeV/u and provides a beam power up to 400kW. Four SRF cavity families are used from β=0.041, 0.085 (QWRs) to 0.29 and 0.53 (HWRs). 8T superconducting solenoids are installed in the cryomodules for space effective strong beam focusing. The biggest challenges are in accelerating the high-power heavy ion beams from the very low energy to medium energy and the stable operation for large user community. The SRF cryomodule design addressed three critical issues: high performance, stable operation and easy maintainability, which chose several unique technical strategies, e.g.2K operation, bottom up cryomodule assembly, local magnetic shielding and so on. This talk will include high performance cavity R&D, local magnetic shielding, flux trapping by solenoid fringe field, and bottom up cryomodule assembly.

Slides THIOA02 [5.049 MB]

Paper	Title	Page
MOPP044	MSU RE-Accelerator ReA3 0.085 QWR Cryomodule Status	155
	T. Xu, B. Bird, F. Casagrande, J.L. Crisp, K.D. Davidson, C. Dudley, A. Facco, P.E. Gibson, I. Grender, L. Hodges, K. Holland, M.J. Johnson, S. Jones, B. Laumer, D. Leitner, A. Mccartney, S.J. Miller, D. Morris, S. Nash, J.P. Ozelis, J. Popielarski, L. Popielarski, R. Rosas, R.J. Rose, K. Saito, M. Thrush, R. Walker, J. Wei, W. Wittmer, Y. Xu FRIB, East Lansing, Michigan, USA B. Arend, J. Ottarson, D.P. Sanderson, D. Wahlquist, J. Wenstrom NSCL, East Lansing, Michigan, USA M. Leitner LBNL, Berkeley, California, USA
	ReA3 β=0.085 QWR cryomodule is the third cryomodule for the superconducting LINAC of ReA3 reaccelerated beam facility, which will bring the maximum beam energy to 3 MeV/u for heavy ions. This cryomodule consists of 8 β=0.085 QWR cavities and 3 9T superconducting solenoids and operates at 4K. Qualification of cavities and FPCs and the construction of cold mass was completed in 2013. The installation of the module was completed this summer. Functioning not only as an important part of the ReA3 facility, cryomodule 3 also serves as a test bed for FRIB driver Linac and demonstrated the technology needed for FRIB CMs. Here we report the construction, installation and testing of the β=0.085 cryomodule and the development of the critical components. Project funded by Michigan State University

THIOA02	Superconducting RF Development for FRIB at MSU	790
	K. Saito, N.K. Bultman, E.E. Burkhardt, F. Casagrande, S.K. Chandrasekaran, S. Chouhan, C. Compton, J.L. Crisp, K. Elliott, A. Facco, A.D. Fox, P.E. Gibson, M.J. Johnson, G. Kiupel, R.E. Laxdal, M. Leitner, S.M. Lidia, I.M. Malloch, D. Miller, S.J. Miller, D. Morris, D. Norton, R. Oweiss, J.P. Ozelis, J. Popielarski, L. Popielarski, A.P. Rauch, R.J. Rose, T. Russo, S. Shanab, M. Shuptar, S. Stark, N.R. Usher, G.J. Velianoff, D.R. Victory, J. Wei, G. Wu, X. Wu, T. Xu, T. Xu, Y. Yamazaki, Q. Zhao, Z. Zheng FRIB, East Lansing, Michigan, USA
	Funding: *This material is based upon work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661. FRIB is a $730M heavy ion accelerator project and a very large scale machine for many nuclear physics users. The civil construction started on March 17th 2014. The SRF system design and development have completed. The machine is to be in early completion end of 2019. FRIB accelerates ion species up to 238U with energies of no less than 200MeV/u and provides a beam power up to 400kW. Four SRF cavity families are used from β=0.041, 0.085 (QWRs) to 0.29 and 0.53 (HWRs). 8T superconducting solenoids are installed in the cryomodules for space effective strong beam focusing. The biggest challenges are in accelerating the high-power heavy ion beams from the very low energy to medium energy and the stable operation for large user community. The SRF cryomodule design addressed three critical issues: high performance, stable operation and easy maintainability, which chose several unique technical strategies, e.g.2K operation, bottom up cryomodule assembly, local magnetic shielding and so on. This talk will include high performance cavity R&D, local magnetic shielding, flux trapping by solenoid fringe field, and bottom up cryomodule assembly.
	Slides THIOA02 [5.049 MB]