LINAC2014 - List of Authors (Comunian, M.)

Paper	Title	Page
THPP014	Catalogue of Losses for the Linear IFMIF Prototype Accelerator	860
THPOL09	use link to see paper's listing under its alternate paper code
	N. Chauvin, P.A.P. Nghiem, D. Uriot CEA/IRFU, Gif-sur-Yvette, France M. Comunian INFN/LNL, Legnaro (PD), Italy C. Oliver CIEMAT, Madrid, Spain
	One of the activities of the EVEDA (Engineering Validation and Engineering Design Activities) phase of the IFMIF (International Fusion Materials Irradiation Facility) project consists in building, testing and operating, in Japan, a 125 mA/9 MeV deuteron accelerator, called LIPAc, which has been developed in Europe. For the accelerator safety aspects, a precise knowledge of beam loss location and power deposition is crucial, especially for a high intensity, high power accelerator like LIPAc. This paper presents the beam dynamics simulations allowing to estimate beam losses in different situations of the accelerator lifetime: starting from scratch, beam commissioning, tuning or exploration, routine operation, sudden failure. Some results of these studies are given and commented. Recommendations for hot point protection, beam stop velocity, beam power limitation are given accordingly.
	Slides THPP014 [4.780 MB]

THPP044	ESS Normal Conducting Linac Status and Plans	948
	A. Ponton, B. Cheymol, R. De Prisco, M. Eshraqi, R. Miyamoto, E. Sargsyan ESS, Lund, Sweden G. Bourdelle, M. Desmons, A. France, O. Piquet, B. Pottin CEA/DSM/IRFU, France I. Bustinduy, P.J. González, J.L. Muñoz, I. Rueda, F. Sordo ESS Bilbao, Bilbao, Spain L. Celona, S. Gammino, L. Neri INFN/LNS, Catania, Italy M. Comunian, F. Grespan, A. Pisent, C. R. Roncolato INFN/LNL, Legnaro (PD), Italy P. Mereu INFN-Torino, Torino, Italy
	The ESS Normal Conducting (NC) linac is composed of an ion source, a Low Energy Beam Transport line, a Radio Frequency Quarupole (RFQ), a Medium Energy Beam Transport Line (MEBT) and a Drift Tube Linac (DTL). It creates, bunches and accelerates the proton beam up to 90 MeV before injecting into the superconducting linac which will deliver a 5 MW beam onto the neutron production target. The construction of the NC linac is part of a broad collaboration involving experts of various Labs in Europe. The technical chalenges and the collaboration strategy for the NC linac will be presented.

THPP086	ESS DTL Error Study	1047
	M. Comunian, F. Grespan, A. Pisent INFN/LNL, Legnaro (PD), Italy
	The Drift Tube Linac (DTL) of the European Spallation Source (ESS) is designed to operate at 352.2 MHz with a duty cycle of 4% (3 ms pulse length, 14 Hz repetition period) and will accelerate a proton beam of 62.5 mA pulse peak current from 3.62 to 90 MeV. The error study is decisive to define the DTL manufacturing tolerances and to evaluate its robustness. In this paper the DTL performances are shown.

THPP087	ESS DTL Design and Drift Tube Prototypes	1050
	F. Grespan, M. Comunian, A. Pisent, M. Poggi, C. R. Roncolato INFN/LNL, Legnaro (PD), Italy P. Mereu INFN-Torino, Torino, Italy
	The Drift Tube Linac (DTL) for the ESS accelerator will accelerate protons up to 62.5 mA average pulse current from 3.62 to 90 MeV. The 5 tanks composing the DTL are designed to operate at 352.2 MHz in pulses of 2.86 ms long with a repetition rate of 14 Hz. The accelerating field is around 3.1 MV/m, constant in each tank. Permanent magnet quadrupoles (PMQs) are used as focusing element in a FODO lattice. The empty drift tubes accommodate Electro Magnetic Dipoles (EMDs) and Beam Position Monitors (BPMs) in order to implement beam corrective schemes. A complete set of Drift Tubes is under construction that is BPM, EMD and PMQ types. These prototypes are aimed to validate the design with the involved integration issues of the various components, as well as the overall technological and assembly process. This paper presents the main mechanical choices and the status of the prototyping program of the Drift Tubes.

Paper

Title

Page

THPP014

Catalogue of Losses for the Linear IFMIF Prototype Accelerator

860

THPOL09

use link to see paper's listing under its alternate paper code

N. Chauvin, P.A.P. Nghiem, D. Uriot
CEA/IRFU, Gif-sur-Yvette, France
M. Comunian
INFN/LNL, Legnaro (PD), Italy
C. Oliver
CIEMAT, Madrid, Spain

One of the activities of the EVEDA (Engineering Validation and Engineering Design Activities) phase of the IFMIF (International Fusion Materials Irradiation Facility) project consists in building, testing and operating, in Japan, a 125 mA/9 MeV deuteron accelerator, called LIPAc, which has been developed in Europe. For the accelerator safety aspects, a precise knowledge of beam loss location and power deposition is crucial, especially for a high intensity, high power accelerator like LIPAc. This paper presents the beam dynamics simulations allowing to estimate beam losses in different situations of the accelerator lifetime: starting from scratch, beam commissioning, tuning or exploration, routine operation, sudden failure. Some results of these studies are given and commented. Recommendations for hot point protection, beam stop velocity, beam power limitation are given accordingly.

Slides THPP014 [4.780 MB]

THPP044

ESS Normal Conducting Linac Status and Plans

948

A. Ponton, B. Cheymol, R. De Prisco, M. Eshraqi, R. Miyamoto, E. Sargsyan
ESS, Lund, Sweden
G. Bourdelle, M. Desmons, A. France, O. Piquet, B. Pottin
CEA/DSM/IRFU, France
I. Bustinduy, P.J. González, J.L. Muñoz, I. Rueda, F. Sordo
ESS Bilbao, Bilbao, Spain
L. Celona, S. Gammino, L. Neri
INFN/LNS, Catania, Italy
M. Comunian, F. Grespan, A. Pisent, C. R. Roncolato
INFN/LNL, Legnaro (PD), Italy
P. Mereu
INFN-Torino, Torino, Italy

The ESS Normal Conducting (NC) linac is composed of an ion source, a Low Energy Beam Transport line, a Radio Frequency Quarupole (RFQ), a Medium Energy Beam Transport Line (MEBT) and a Drift Tube Linac (DTL). It creates, bunches and accelerates the proton beam up to 90 MeV before injecting into the superconducting linac which will deliver a 5 MW beam onto the neutron production target. The construction of the NC linac is part of a broad collaboration involving experts of various Labs in Europe. The technical chalenges and the collaboration strategy for the NC linac will be presented.

THPP086

ESS DTL Error Study

1047

M. Comunian, F. Grespan, A. Pisent
INFN/LNL, Legnaro (PD), Italy

The Drift Tube Linac (DTL) of the European Spallation Source (ESS) is designed to operate at 352.2 MHz with a duty cycle of 4% (3 ms pulse length, 14 Hz repetition period) and will accelerate a proton beam of 62.5 mA pulse peak current from 3.62 to 90 MeV. The error study is decisive to define the DTL manufacturing tolerances and to evaluate its robustness. In this paper the DTL performances are shown.

THPP087

ESS DTL Design and Drift Tube Prototypes

1050

F. Grespan, M. Comunian, A. Pisent, M. Poggi, C. R. Roncolato
INFN/LNL, Legnaro (PD), Italy
P. Mereu
INFN-Torino, Torino, Italy

The Drift Tube Linac (DTL) for the ESS accelerator will accelerate protons up to 62.5 mA average pulse current from 3.62 to 90 MeV. The 5 tanks composing the DTL are designed to operate at 352.2 MHz in pulses of 2.86 ms long with a repetition rate of 14 Hz. The accelerating field is around 3.1 MV/m, constant in each tank. Permanent magnet quadrupoles (PMQs) are used as focusing element in a FODO lattice. The empty drift tubes accommodate Electro Magnetic Dipoles (EMDs) and Beam Position Monitors (BPMs) in order to implement beam corrective schemes. A complete set of Drift Tubes is under construction that is BPM, EMD and PMQ types. These prototypes are aimed to validate the design with the involved integration issues of the various components, as well as the overall technological and assembly process. This paper presents the main mechanical choices and the status of the prototyping program of the Drift Tubes.