LINAC2014 - List of Authors (Ao, H.)

Paper	Title	Page
MOPP090	Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC	264
	J. Tamura, H. Ao, K. Hirano, Y. Nemoto, N. Ouchi JAEA/J-PARC, Tokai-mura, Japan H. Asano Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan F. Naito, K. Takata KEK, Ibaraki, Japan
	Annular-ring Coupled Structure (ACS) cavities have been installed to increase the beam energy of the Japan Proton Accelerator Research Complex (J-PARC) linac from 181 to 400 MeV in the maintenance period of 2013. Some of the pillbox type input couplers with a ceramic window to the ACS cavity have a larger coupling factor than the target value by an avoidable manufacturing error. To adjust the coupling factor, a capacitive iris was introduced in the rectangular waveguide near the coupler. As a result, it has been confirmed that the iris decreases the coupling factor to a target value without any significant increase in temperature and in a discharge rate during high-power operation. In this paper, the design procedure of the capacitive iris and the result of the coupling factor adjustment are presented.

TUPP073	Study of the ACS Cavity Without a Bridge Cavity	596
TUPOL05	use link to see paper's listing under its alternate paper code
	F. Naito, K. Takata KEK, Ibaraki, Japan H. Ao, K. Hasegawa, K. Hirano, T. Morishita, N. Ouchi JAEA/J-PARC, Tokai-mura, Japan
	J-PARC has installed the Annular-ring Coupled Structure (ACS) linac to increase the beam energy up to 400 MeV. One ACS module is composed of two accelerating tanks which are coupled by the bridge cavity. The bridge cavity simplifies the handling of the multi-tank system. While it is possible to feed the RF power into the each tanks directly with the power divider and the phase shifter instead of the bridge cavity. The rf properties of the ACS linac with the direct rf-power supply system has been measured by using the low power model made of aluminum. The measured results are described in the paper.
	Slides TUPP073 [5.042 MB]

THPP089	High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac	1053
THPOL07	use link to see paper's listing under its alternate paper code
	H. Ao, T. Ito, Y. Nemoto, H. Oguri, N. Ouchi, J. Tamura JAEA/J-PARC, Tokai-mura, Japan H. Asano Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan Z. Fang, K. Futatsukawa, K. Nanmo, T. Sugimura KEK, Ibaraki, Japan
	The linac of Japan Proton Accelerator Research Complex (J-PARC), which is an injector to a 3-GeV synchrotron, comprised a 3-MeV RFQ, 50-MeV DTLs and 181-MeV Separated-type DTLs. From September 2013, 25 annular-ring coupled structure (ACS) cavities were additionally installed to increase the linac beam energy up to 400 MeV and achieve 1-MW beam power of the 3-GeV synchrotron. After installation work the high power conditioning was started from December 2013 and most of the ACS cavities were conditioned within three weeks. We passed through some troubles and finally finished conditioning all the cavities until the middle of January 2014. In this paper, we present the conditioning results and how to handle the issue in the conditioning process.
	Slides THPP089 [7.756 MB]

Paper

Title

Page

Adjustment of the Coupling Factor of the Input Coupler of the ACS Linac by a Capacitive Iris in J-PARC

264

J. Tamura, H. Ao, K. Hirano, Y. Nemoto, N. Ouchi
JAEA/J-PARC, Tokai-mura, Japan
H. Asano
Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan
F. Naito, K. Takata
KEK, Ibaraki, Japan

Annular-ring Coupled Structure (ACS) cavities have been installed to increase the beam energy of the Japan Proton Accelerator Research Complex (J-PARC) linac from 181 to 400 MeV in the maintenance period of 2013. Some of the pillbox type input couplers with a ceramic window to the ACS cavity have a larger coupling factor than the target value by an avoidable manufacturing error. To adjust the coupling factor, a capacitive iris was introduced in the rectangular waveguide near the coupler. As a result, it has been confirmed that the iris decreases the coupling factor to a target value without any significant increase in temperature and in a discharge rate during high-power operation. In this paper, the design procedure of the capacitive iris and the result of the coupling factor adjustment are presented.

TUPP073

Study of the ACS Cavity Without a Bridge Cavity

596

TUPOL05

use link to see paper's listing under its alternate paper code

F. Naito, K. Takata
KEK, Ibaraki, Japan
H. Ao, K. Hasegawa, K. Hirano, T. Morishita, N. Ouchi
JAEA/J-PARC, Tokai-mura, Japan

J-PARC has installed the Annular-ring Coupled Structure (ACS) linac to increase the beam energy up to 400 MeV. One ACS module is composed of two accelerating tanks which are coupled by the bridge cavity. The bridge cavity simplifies the handling of the multi-tank system. While it is possible to feed the RF power into the each tanks directly with the power divider and the phase shifter instead of the bridge cavity. The rf properties of the ACS linac with the direct rf-power supply system has been measured by using the low power model made of aluminum. The measured results are described in the paper.

Slides TUPP073 [5.042 MB]

THPP089

High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac

1053

THPOL07

use link to see paper's listing under its alternate paper code

H. Ao, T. Ito, Y. Nemoto, H. Oguri, N. Ouchi, J. Tamura
JAEA/J-PARC, Tokai-mura, Japan
H. Asano
Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan
Z. Fang, K. Futatsukawa, K. Nanmo, T. Sugimura
KEK, Ibaraki, Japan

The linac of Japan Proton Accelerator Research Complex (J-PARC), which is an injector to a 3-GeV synchrotron, comprised a 3-MeV RFQ, 50-MeV DTLs and 181-MeV Separated-type DTLs. From September 2013, 25 annular-ring coupled structure (ACS) cavities were additionally installed to increase the linac beam energy up to 400 MeV and achieve 1-MW beam power of the 3-GeV synchrotron. After installation work the high power conditioning was started from December 2013 and most of the ACS cavities were conditioned within three weeks. We passed through some troubles and finally finished conditioning all the cavities until the middle of January 2014. In this paper, we present the conditioning results and how to handle the issue in the conditioning process.

Slides THPP089 [7.756 MB]