LINAC2012 - List of Authors (Tiede, R.)

Paper

Title

Page

Front-End Linac Design and Beam Dynamics Simulations for MYRRHA

813

C. Zhang, H. Klein, D. Mäder, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede, M. Vossberg
IAP, Frankfurt am Main, Germany

Funding: Funded by the European Atomic Energy Community’s (Euratom) 7th Framework Programme under Grant Agreement n°269565.
A 17MeV, 176MHz, and CW (Continuous Wave) proton linac is being developed as the front end of the driver accelerator for the MYRRHA facility in Mol, Belgium. Based on the promising preliminary design, further simulation and optimization studies have been performed with respect to code benchmarking, RFQ simulation using realistic LEBT output distributions, and an updated CH-DTL design with more detailed inter-tank configurations. This paper summarizes the new results.

Slides THPLB03 [1.292 MB]

THPB005

Front-End Linac Design and Beam Dynamics Simulations for MYRRHA

849

C. Zhang, H. Klein, D. Mäder, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede, M. Vossberg
IAP, Frankfurt am Main, Germany

Funding: Funded by the European Atomic Energy Community’s (Euratom) 7th Framework Programme under Grant Agreement n°269565.
A 17MeV, 176MHz, and CW (Continuous Wave) proton linac is being developed as the front end of the driver accelerator for the MYRRHA facility in Mol, Belgium. Based on the promising preliminary design, further simulation and optimization studies have been performed with respect to code benchmarking, RFQ simulation using realistic LEBT output distributions, and an updated CH-DTL design with more detailed inter-tank configurations. This paper summarizes the new results.

THPB034

Status of the FAIR 70 MeV Proton Linac

927

L. Groening, W.A. Barth, R. Berezov, G. Clemente, P. Forck, R. Hollinger, A. Krämer, C. Mühle, J. Pfister, G. Schreiber, J. Trüller, W. Vinzenz, C. Will
GSI, Darmstadt, Germany
N. Chauvin, O. Delferrière, O. Tuske
CEA/IRFU, Gif-sur-Yvette, France
B. Koubek, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede
IAP, Frankfurt am Main, Germany
B. Launé, J. Lesrel
IPN, Orsay, France
C.S. Simon
CEA/DSM/IRFU, France

To provide the primary proton beam for the FAIR anti-proton research program, a 70 MeV, 70 mA linac is currently under design & construction at GSI. The nc machine comprises an ECR source, a 3 MeV RFQ, and a DTL based on CH-cavities. Up to 36 MeV pairs of rf-coupled cavities (CCH) are used. A prototype cavity has been built and is prepared for high power rf-testing. An overview of the status as well as on the perspectives of the project is given.

Paper	Title	Page
THPLB03	Front-End Linac Design and Beam Dynamics Simulations for MYRRHA	813
	C. Zhang, H. Klein, D. Mäder, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede, M. Vossberg IAP, Frankfurt am Main, Germany
	Funding: Funded by the European Atomic Energy Community’s (Euratom) 7th Framework Programme under Grant Agreement n°269565. A 17MeV, 176MHz, and CW (Continuous Wave) proton linac is being developed as the front end of the driver accelerator for the MYRRHA facility in Mol, Belgium. Based on the promising preliminary design, further simulation and optimization studies have been performed with respect to code benchmarking, RFQ simulation using realistic LEBT output distributions, and an updated CH-DTL design with more detailed inter-tank configurations. This paper summarizes the new results.
	Slides THPLB03 [1.292 MB]

THPB005	Front-End Linac Design and Beam Dynamics Simulations for MYRRHA	849
	C. Zhang, H. Klein, D. Mäder, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede, M. Vossberg IAP, Frankfurt am Main, Germany
	Funding: Funded by the European Atomic Energy Community’s (Euratom) 7th Framework Programme under Grant Agreement n°269565. A 17MeV, 176MHz, and CW (Continuous Wave) proton linac is being developed as the front end of the driver accelerator for the MYRRHA facility in Mol, Belgium. Based on the promising preliminary design, further simulation and optimization studies have been performed with respect to code benchmarking, RFQ simulation using realistic LEBT output distributions, and an updated CH-DTL design with more detailed inter-tank configurations. This paper summarizes the new results.

THPB034	Status of the FAIR 70 MeV Proton Linac	927
	L. Groening, W.A. Barth, R. Berezov, G. Clemente, P. Forck, R. Hollinger, A. Krämer, C. Mühle, J. Pfister, G. Schreiber, J. Trüller, W. Vinzenz, C. Will GSI, Darmstadt, Germany N. Chauvin, O. Delferrière, O. Tuske CEA/IRFU, Gif-sur-Yvette, France B. Koubek, H. Podlech, U. Ratzinger, A. Schempp, R. Tiede IAP, Frankfurt am Main, Germany B. Launé, J. Lesrel IPN, Orsay, France C.S. Simon CEA/DSM/IRFU, France
	To provide the primary proton beam for the FAIR anti-proton research program, a 70 MeV, 70 mA linac is currently under design & construction at GSI. The nc machine comprises an ECR source, a 3 MeV RFQ, and a DTL based on CH-cavities. Up to 36 MeV pairs of rf-coupled cavities (CCH) are used. A prototype cavity has been built and is prepared for high power rf-testing. An overview of the status as well as on the perspectives of the project is given.