Paper |
Title |
Page |
MOPB012 |
First RF Measurement Results for the European XFEL SC Cavity Production |
195 |
|
- A.A. Sulimov, P.B. Borowiec, V. Gubarev, J. Iversen, D. Kostin, G. Kreps, K. Krzysik, A. Matheisen, W.-D. Möller, D. Reschke, W. Singer
DESY, Hamburg, Germany
|
|
|
The first reference cavities (RCV) for the European XFEL Project are being tested within the collaboration of Research Instruments (RI), E. ZANON, IFJ-PAN and DESY: - production and warm RF measurements of cavities and their components at RI and ZANON; - surface preparation at DESY; - cold RF tests at DESY by IFJ-PAN. Purpose of the RCV is to establish a stable cavity fabrication and qualification of the surface preparation infrastructure at industry. All necessary RF measurements were done, starting with mechanical fabrication in 2011, till the tuning and cold cavity RF tests in 2012. We present the first results of RF measurements within RCV production for the European XFEL.
|
|
|
Poster MOPB012 [1.843 MB]
|
|
|
MOPB017 |
Integration of the European XFEL Accelerating Modules |
207 |
|
- E. Vogel, S. Barbanotti, J. Branlard, H. Brueck, S. Choroba, L. Hagge, K. Jensch, V.V. Katalev, D. Kostin, D. Käfer, L. Lilje, A. Matheisen, W.-D. Möller, D. Nölle, B. Petersen, J. Prenting, D. Reschke, H. Schlarb, M. Schmökel, J.K. Sekutowicz, W. Singer, H. Weise
DESY, Hamburg, Germany
- J. Świerbleski, P.B. Borowiec
IFJ-PAN, Kraków, Poland
- S. Berry, O. Napoly, B. Visentin
CEA/DSM/IRFU, France
- A. Bosotti, P. Michelato
INFN/LASA, Segrate (MI), Italy
- W. Kaabi
LAL, Orsay, France
- C. Madec
CEA/IRFU, Gif-sur-Yvette, France
- E.P. Plawski
NCBJ, Świerk/Otwock, Poland
- F. Toral
CIEMAT, Madrid, Spain
|
|
|
The production of the 103 superconducting accelerating modules for the European XFEL is an international effort. Institutes and companies from seven different countries (China, France, Germany, Italy, Poland, Russia and Spain), organized in 12 different work packages contribute with parts, capacity for work and facilities to the production of the modules. Currently the series production of the individual parts started or is approaching. Personnel are trained for the assembly and testing of parts and as well for the complete modules. Here we present an overview and the status of all these activities.
|
|
|
TH1A01 |
Results Achieved by the S1-Global Collaboration for ILC |
748 |
|
- H. Hayano, M. Akemoto, S. Fukuda, K. Hara, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
- C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
- T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
- A. Bosotti, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
- K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
- C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
|
|
|
The S1-Global collaboration (scope and plans presented at Linac10) ended successfully in 2011. In the S1-Global experiment several variants of ILC components (e.g. cavities, tuners, modules, couplers) proposed by all SCRF collaborators worldwide have been extensively tested and their performances compared, in order to build consensus for the technical choices towards the ILC TDR and to develop further the concept of plug-compatible components for ILC. The experiment has been carried at KEK with contribution of hardware and manpower from all collaborators.
|
|
|
Slides TH1A01 [6.656 MB]
|
|
|