LINAC2012 - List of Authors (Eidelman, Y.I.)

Paper	Title	Page
MOPB095	Design of MEBT for the Project X Injector Experiment at Fermilab	398
	A.V. Shemyakin, C.M. Baffes, A.Z. Chen, Y.I. Eidelman, B.M. Hanna, V.A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, R.J. Pasquinelli, D.W. Peterson, L.R. Prost, G.W. Saewert, V.E. Scarpine, B.G. Shteynas, N. Solyak, D. Sun, M. Wendt, V.P. Yakovlev Fermilab, Batavia, USA T. Tang SLAC, Menlo Park, California, USA
	Funding: Fermilab is operated by Fermi Research Alliance, LLC, under Contract DE-AC02-07CH11359 with the U.S. DOE The Project X Injector Experiment (PXIE), a test bed for the Project X front end, will be completed at Fermilab at FY12-16. One of the challenging goals of PXIE is demonstration of the capability to form a 1 mA H⁻ beam with an arbitrary selected bunch pattern from the initially 5 mA 162.5 MHz CW train. The bunch selection will be made in the Medium Energy Beam Transport (MEBT) at 2.1 MeV by diverting undesired bunches to an absorber. This paper will present the MEBT scheme and describe development of its elements, including the kickers and absorber.

TUPB062	Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac	618
	G.I. Cancelo, B. Chase, Y.I. Eidelman, S. Nagaitsev, N. Solyak Fermilab, Batavia, USA
	The Pulsed Linac is a will require over 200 9-cell, 1300 MHz cavities packed in 26 ILC type cryomodules to accelerate 1 mA average beam current from 3GeV to 8 GeV. The architecture of the RF must optimize RF power, beam emittance, and energy gain amid a large number of requirement and constraints. The pulse length is a critical issue. Ideally, a 26 ms pulse would allow direct injection into the Fermilab’s Main Injector, bypassing the need of the Fermilab’s Recicler. High loaded quality factors (QL) are also desirable to minimize RF power. These requirements demand an accurate control of the cavity resonant frequency disturbed by Lorentz Force Detuning and microphonics. Also the LLRF control system must regulate the RF amplitude and phase within tight bounds amid a long list of dynamic disturbances. The present work describes the simulation efforts and measurements at Fermilab facilities.

Paper

Title

Page

Design of MEBT for the Project X Injector Experiment at Fermilab

398

A.V. Shemyakin, C.M. Baffes, A.Z. Chen, Y.I. Eidelman, B.M. Hanna, V.A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, R.J. Pasquinelli, D.W. Peterson, L.R. Prost, G.W. Saewert, V.E. Scarpine, B.G. Shteynas, N. Solyak, D. Sun, M. Wendt, V.P. Yakovlev
Fermilab, Batavia, USA
T. Tang
SLAC, Menlo Park, California, USA

Funding: Fermilab is operated by Fermi Research Alliance, LLC, under Contract DE-AC02-07CH11359 with the U.S. DOE
The Project X Injector Experiment (PXIE), a test bed for the Project X front end, will be completed at Fermilab at FY12-16. One of the challenging goals of PXIE is demonstration of the capability to form a 1 mA H⁻ beam with an arbitrary selected bunch pattern from the initially 5 mA 162.5 MHz CW train. The bunch selection will be made in the Medium Energy Beam Transport (MEBT) at 2.1 MeV by diverting undesired bunches to an absorber. This paper will present the MEBT scheme and describe development of its elements, including the kickers and absorber.

TUPB062

Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac

618

G.I. Cancelo, B. Chase, Y.I. Eidelman, S. Nagaitsev, N. Solyak
Fermilab, Batavia, USA

The Pulsed Linac is a will require over 200 9-cell, 1300 MHz cavities packed in 26 ILC type cryomodules to accelerate 1 mA average beam current from 3GeV to 8 GeV. The architecture of the RF must optimize RF power, beam emittance, and energy gain amid a large number of requirement and constraints. The pulse length is a critical issue. Ideally, a 26 ms pulse would allow direct injection into the Fermilab’s Main Injector, bypassing the need of the Fermilab’s Recicler. High loaded quality factors (QL) are also desirable to minimize RF power. These requirements demand an accurate control of the cavity resonant frequency disturbed by Lorentz Force Detuning and microphonics. Also the LLRF control system must regulate the RF amplitude and phase within tight bounds amid a long list of dynamic disturbances. The present work describes the simulation efforts and measurements at Fermilab facilities.