LINAC2012 - List of Authors (Ayvazyan, V.)

Paper	Title	Page
TUPB019	Second CW and LP Operation Test of XFEL Prototype Cryomodule	516
	J.K. Sekutowicz, V. Ayvazyan, J. Branlard, M. Ebert, J. Eschke, A. Gössel, D. Kostin, W. Merz, F. Mittag, R. Onken DESY, Hamburg, Germany W. Cichalewski, W. Jałmużna, A. Piotrowski, K.P. Przygoda TUL-DMCS, Łódź, Poland K. Czuba, Ł. Zembala Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland I.M. Kudla, J. Szewiński NCBJ, Świerk/Otwock, Poland
	In summer 2011, we have performed the first test of continuous wave (cw) and long pulse (lp) operation of the XFEL prototype cryomodule, which originally has been designed for short pulse operation. In April and June 2012, the second test took place, with the next cryomodule prototype. For that test cooling in the cryomodule was improved and new LLRF system has been implemented. In this contribution we discuss results of the second RF test of these new types of operation, which can in the future extend flexibility in the time beam structure of the European XFEL facility

THPB085	LLRF Automation for the 9mA ILC Tests at FLASH	1023
	J. Branlard, V. Ayvazyan, O. Hensler, H. Schlarb, Ch. Schmidt, N.J. Walker, M. Walla DESY, Hamburg, Germany G.I. Cancelo, B. Chase Fermilab, Batavia, USA J. Carwardine ANL, Argonne, USA W. Cichalewski, W. Jałmużna TUL-DMCS, Łódź, Poland S. Michizono KEK, Ibaraki, Japan
	Since 2009 and under the scope of the International Linear Collider (ILC) R&D, a series of studies takes place twice a year at the Free electron Laser accelerator in Hamburg, (FLASH) DESY, in order to investigate technical challenges related to the high-gradient, high-beam-current design of the ILC. Such issues as operating cavities near their quench limit with high beam loading or in klystron saturation regime are investigated, always pushing the limits of FLASH nominal operational conditions. To support these studies, a series of automation algorithms have been developed and implemented at DESY. These include automatic detection of cavity quenches, automatic adjustment of the superconducting cavity quality factor, and automatic compensation of detuning due to Lorentz forces. This paper explains the functionality of these automation tools, details about their implementation, and shows the experience acquired during the last 9mA ILC test which took place at DESY in February 2012. The benefit of these algorithms and the R&D results these automation tools have permitted will be clearly explained.

Paper

Title

Page

Second CW and LP Operation Test of XFEL Prototype Cryomodule

516

J.K. Sekutowicz, V. Ayvazyan, J. Branlard, M. Ebert, J. Eschke, A. Gössel, D. Kostin, W. Merz, F. Mittag, R. Onken
DESY, Hamburg, Germany
W. Cichalewski, W. Jałmużna, A. Piotrowski, K.P. Przygoda
TUL-DMCS, Łódź, Poland
K. Czuba, Ł. Zembala
Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
I.M. Kudla, J. Szewiński
NCBJ, Świerk/Otwock, Poland

In summer 2011, we have performed the first test of continuous wave (cw) and long pulse (lp) operation of the XFEL prototype cryomodule, which originally has been designed for short pulse operation. In April and June 2012, the second test took place, with the next cryomodule prototype. For that test cooling in the cryomodule was improved and new LLRF system has been implemented. In this contribution we discuss results of the second RF test of these new types of operation, which can in the future extend flexibility in the time beam structure of the European XFEL facility

THPB085

LLRF Automation for the 9mA ILC Tests at FLASH

1023

J. Branlard, V. Ayvazyan, O. Hensler, H. Schlarb, Ch. Schmidt, N.J. Walker, M. Walla
DESY, Hamburg, Germany
G.I. Cancelo, B. Chase
Fermilab, Batavia, USA
J. Carwardine
ANL, Argonne, USA
W. Cichalewski, W. Jałmużna
TUL-DMCS, Łódź, Poland
S. Michizono
KEK, Ibaraki, Japan

Since 2009 and under the scope of the International Linear Collider (ILC) R&D, a series of studies takes place twice a year at the Free electron Laser accelerator in Hamburg, (FLASH) DESY, in order to investigate technical challenges related to the high-gradient, high-beam-current design of the ILC. Such issues as operating cavities near their quench limit with high beam loading or in klystron saturation regime are investigated, always pushing the limits of FLASH nominal operational conditions. To support these studies, a series of automation algorithms have been developed and implemented at DESY. These include automatic detection of cavity quenches, automatic adjustment of the superconducting cavity quality factor, and automatic compensation of detuning due to Lorentz forces. This paper explains the functionality of these automation tools, details about their implementation, and shows the experience acquired during the last 9mA ILC test which took place at DESY in February 2012. The benefit of these algorithms and the R&D results these automation tools have permitted will be clearly explained.