LINAC2012 - List of Authors (Adolphsen, C.)

Paper

Title

Page

Commissioning of the X-Band Test Area at SLAC

234

C. Limborg-Deprey, C. Adolphsen, M.P. Dunning, S. Gilevich, C. Hast, R.K. Jobe, D.J. McCormick, A. Miahnahri, T.O. Raubenheimer, A.E. Vlieks, D.R. Walz, S.P. Weathersby
SLAC, Menlo Park, California, USA

Funding: Work supported by the U.S. Department of Energy under contract DE-AC02-76SF00515.
The X-Band Test Area (XTA) is being assembled in the NLCTA tunnel at SLAC to serve as a test facility for new X-Band RF guns. The first gun to be tested is an upgraded version of the 5.6 cell, 200 MV/m peak field X-band gun designed at SLAC in 2003 for the Compton Scattering experiment run in ASTA [1]. The XTA beamline is equipped with diagnostics to measure both the longitudinal phase space and the transverse phase space properties of the beam after it has reached 100 MeV. We will review design choices and present some early commissioning results.
[1] A.E. Vlieks, et al. “Recent measurements and plans for the SLAC Compton X-ray source”, SLAC-PUB-11689, 2006. 10pp. Published in AIP Conf. Proc.807:481-490, 2006

TH1A01

Results Achieved by the S1-Global Collaboration for ILC

748

H. Hayano, M. Akemoto, S. Fukuda, K. Hara, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

The S1-Global collaboration (scope and plans presented at Linac10) ended successfully in 2011. In the S1-Global experiment several variants of ILC components (e.g. cavities, tuners, modules, couplers) proposed by all SCRF collaborators worldwide have been extensively tested and their performances compared, in order to build consensus for the technical choices towards the ILC TDR and to develop further the concept of plug-compatible components for ILC. The experiment has been carried at KEK with contribution of hardware and manpower from all collaborators.

Slides TH1A01 [6.656 MB]

Paper	Title	Page
MOPB029	Commissioning of the X-Band Test Area at SLAC	234
	C. Limborg-Deprey, C. Adolphsen, M.P. Dunning, S. Gilevich, C. Hast, R.K. Jobe, D.J. McCormick, A. Miahnahri, T.O. Raubenheimer, A.E. Vlieks, D.R. Walz, S.P. Weathersby SLAC, Menlo Park, California, USA
	Funding: Work supported by the U.S. Department of Energy under contract DE-AC02-76SF00515. The X-Band Test Area (XTA) is being assembled in the NLCTA tunnel at SLAC to serve as a test facility for new X-Band RF guns. The first gun to be tested is an upgraded version of the 5.6 cell, 200 MV/m peak field X-band gun designed at SLAC in 2003 for the Compton Scattering experiment run in ASTA [1]. The XTA beamline is equipped with diagnostics to measure both the longitudinal phase space and the transverse phase space properties of the beam after it has reached 100 MeV. We will review design choices and present some early commissioning results. [1] A.E. Vlieks, et al. “Recent measurements and plans for the SLAC Compton X-ray source”, SLAC-PUB-11689, 2006. 10pp. Published in AIP Conf. Proc.807:481-490, 2006

TH1A01	Results Achieved by the S1-Global Collaboration for ILC	748
	H. Hayano, M. Akemoto, S. Fukuda, K. Hara, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	The S1-Global collaboration (scope and plans presented at Linac10) ended successfully in 2011. In the S1-Global experiment several variants of ILC components (e.g. cavities, tuners, modules, couplers) proposed by all SCRF collaborators worldwide have been extensively tested and their performances compared, in order to build consensus for the technical choices towards the ILC TDR and to develop further the concept of plug-compatible components for ILC. The experiment has been carried at KEK with contribution of hardware and manpower from all collaborators.
	Slides TH1A01 [6.656 MB]