| Paper | Title | Page |
|---|---|---|
| THP079 | High-Power Test of a 57-MHz CW RFQ | 767 |
|
||
|
High power heavy-ion drivers require a CW low-frequency RFQ for initial acceleration. The technique of high-temperature furnace brazed OFE copper cavities has proven to be very reliable for the production of high-quality CW accelerating structures. By appropriate choice of the resonant structure for the RIA driver RFQ we have achieved moderate transverse dimensions of the cavity and high quality accelerating-focusing fields required for simultaneous acceleration of multiple charge state ion beams. In our application the RFQ must provide stable operation over a wide range of RF power levels. To demonstrate the technology and high-power operation we have built an engineering prototype of one-segment of the 57-MHz RFQ structure [1]. The RFQ is designed as a 100% OFE copper structure and fabricated with a two-step furnace brazing process. The brazing process was successful and the cavity was shown to be vacuum tight. The errors in the tip-to-tip distances of the vanes average less than 50 microns. The RF measurements show excellent electrical properties of the resonator with a measured unloaded Q equal to 95% of the simulated value. Currently high-power tests are being performed.
*J. W. Rathke et al., Preliminary Engineering Design of A 57.5 MHz CW RFQ for the RIA Driver LINAC. Proc. of the LINAC-2002, p. 467. |