A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Lahti, G. E.

Paper Title Page
THP019 Commissioning of the Digital LLRF for the CEBAF Injector/Separator 607
 
  • T. E. Plawski, H. Dong, C. Hovater, K. King, G. E. Lahti, J. Musson
    Jefferson Lab, Newport News, Virginia
 
  The design and production of the CEBAF accelerator 499 MHz digital Low-Level RF control system has been completed. The first five systems were installed for use with the CEBAF Separator RF deflecting cavities operating at 499 MHz. The next four systems were installed in the injector on the chopping cavities (also 499 MHz deflecting cavities). The new LLRF system replaced an analog system that was over 15 years old. For initial testing an extensive acceptance plan along with a LLRF test stand was developed and incorporated to assure system performance as well as reliability. Various VHDL firmware was developed and modified to support operation of this system and included specific operational diagnostics. Once the acceptance tests were completed, the new systems were installed in the accelerator, in parallel with the existing analog LLRF, for extensive in-situ testing and comparison. After system commissioning, the new RF systems were assigned to the CEBAF accelerator and turned over to Accelerator Operations. This paper will address the VHDL firmware evolution, the automated tests and the performance measurements made through out the installation and commissioning process.