Tanaka, T.

Paper	Title	Page
MOP25	The LEBRA 125 MeV Electron Linac for FEL And PXR Generation	90
	K. Hayakawa, Y. Hayakawa, K. Ishiwata, K. Kanno, K. Nakao, T. Sakai, I. Sato, T. Tanaka LEBRA, Funabashi K. Yokoyama KEK, Ibaraki
	A 125 MeV electron linac has been constructed at Laboratory for Electron Beam Research and Application (LEBRA) in Nihon University for Free Electron Laser (FEL) and Parametric X-ray (PXR) generation. Two klystrons feed rf power of approximately 20 MW peak and 20 μsec pulse duration each to an injector and three 4 m accelerating structures. Phase of the rf fed to each component is controlled independently. Two accelerating structures connected with the second klystron and a ninety degrees bending system as a momentum analyzer constitute a magnetic bunching system. Electron bunches of 3 to 4 psec width formed at the injector are compressed to within 1 psec during passing through the magnetic bunching system. Peak current of the electron beam injected to the FEL system installed downstream of the momentum analyzer is expected to be about 50 A. FEL lasing has been achieved at the wavelength range from 1 to 6 mm. Estimated peak power of the extracted FEL light pulse is about 2 MW. Applied researches using the FEL started last autumn. Preliminary experiment for the PXR generation has been continued.
TU202	Low Emittance 500 kV Thermionic Electron Gun	261
	K. Togawa, H. Baba, T. Inagaki, K. Onoe, T. Shintake, T. Tanaka RIKEN Spring-8 Harima, Hyogo H. Matsumoto KEK, Ibaraki
	A 500 kV pulsed electron gun has been constructed for the injector system of the SASE-FEL project at SPring-8 (SCSS project). A CeB6 single crystal was chosen as a thermionic cathode, because of its excellent emission properties. We have succeeded in generating a 500 keV beam with 1 A peak current and 3 μs FWHM. The beam was very stable with low jitter. The beam emittance has been measured by means of double-slits method, and the normalized rms emittance of 1.1 π·mm·mrad has been obtained. We report on the experimental result on the emittance measurement of the CeB6 electron gun.
	Transparencies
TUP64	Bunch Length Measurements at LEBRA	411
	K. Yokoyama KEK, Ibaraki K. Hayakawa, Y. Hayakawa, K. Nakao, I. Sato, T. Tanaka LEBRA, Funabashi
	The bunch length of the electron beam from the FEL linac at LEBRA (Laboratory for Electron Beam Research and Application) was estimated from the phase ellipse coefficient which is deduced from the dependence of the beam spread on the accelerating phase. The bunch length of FWHM was estimated approximately 0.33 mm from the results of the experiments. Besides, the pulse length of the FEL lights around the wavelength of 1.5 μm was measured by means of the autocorrelation. The pulse length was less than 0.06 mm according to the number of interfacial waves. These results indicate that the pulse length of the FEL lights isn’t equivalent to the electron bunch length.