The Future Circular Collider (FCC) study foresees the construction of a 90.6 km underground ring where, as a first stage, a high-luminosity electron-positron collider (FCC-ee) is envisaged, operating at beam energies from 45.6 GeV (Z pole) to 182.5 GeV (ttbar). In the FCC-ee experimental interaction regions, various physical processes give rise to particle showers that can be detrimental to machine components as well as equipment in the tunnel, such as cables and electronics. In this work, we evaluate the impact of the synchrotron radiation emitted in the dipoles and the beamstrahlung radiation from the interaction point (IP). The Monte Carlo code FLUKA is used to quantify the power deposited in key machine elements, such as the beamstrahlung dump and the dipole and quadrupole magnets, as well as the cumulative radiation levels in the tunnel. We also examine the effect of synchrotron radiation absorbers in the vacuum chamber, in combination with additional shielding. The results are presented for the different operation modes, namely Z pole and ttbar.

The Future Circular electron-positron Collider, FCC-ee, is a design study for a 90 km circumference luminosity-frontier and highest-energy e+e- collider. It foresees four operation modes optimized for producing different particles by colliding high-brightness lepton beams. Operating such a machine presents unique challenges, including stored beam energies up to 17.5 MJ, a value about two orders of magnitude higher than any lepton collider to date. Given the high stored beam energy, unavoidable beam losses pose a serious risk of damage. Thus, an adequate protection system has to be implemented. To address this challenge, a beam collimation system to protect the sensitive equipment of this machine is indispensable. This paper presents the studies that led to a new collimation system baseline and a collimation performance evaluation under selected beam loss scenarios.

This paper describes the mechanical design of the Future Circular Collider e+e- interaction region. The Future Circular Collider, as a forefront particle accelerator project, demands meticulous attention to the mechanical integrity and performance of its components, to the integration of the different systems and to the respect of the spatial constraint. The vacuum chamber design, the support tube and the bellows design are reported, highlighting the solutions adopted. The structural optimization method of the support structure is also presented, as well as the results obtained.

The Future Circular Collider (FCC) study foresees the construction of a 90.7 km underground ring where, as a first stage, a high-luminosity electron-positron collider (FCC-ee) is envisaged, operating at beam energies from 45.6 GeV (Z pole) to 182.5 GeV (ttbar). In the FCC-ee experimental interaction regions, various physical processes give rise to particle showers that can be detrimental to machine components as well as equipment in the tunnel, such as cables and electronics. In this work, we evaluate the impact of the synchrotron radiation (SR) emitted in the magnets and the beamstrahlung (BS) radiation from the interaction point (IP). The Monte Carlo code FLUKA is used to quantify the power deposited in key machine elements, such as the BS dump, as well as the cumulative radiation levels in the tunnel. We also examine the effect of SR absorbers in the vacuum chamber and of external tungsten shielding. The results are presented for the different operation modes, namely Z pole and ttbar.

In this paper we discuss the latest developments for the FCC-ee interaction region layout, which represents one of the key ingredients to establish the feasibility of the FCC-ee. The collider has to achieve extremely high luminosities over a wide range of center-of-mass energies with two or four interaction points. The complex final focus hosted in the detector region has to be carefully designed, and the impact of beam losses and of any type of synchrotron radiation generated in the interaction region, including beamstrahlung, have to be evaluated in detail with simulations. We give an overview of the progress of the whole machine-detector-interface-related studies, among which are the updated mechanical model of the interaction region, the plans for a novel R&D activity of a IR mockup which is just starting, the collimation scheme and evaluation of beam induced backgrounds in the detectors, evaluation of radiation dose in the experimental area, and MDI integration with the detector.

We present the optics design of the solenoid compensation scheme at the FCC-ee. The 2T solenoids from the experiments induce coupling on the beams, generating an increase on vertical emittance. This compensation scheme minimizes emittance growth, with a final value of approximately 5% of the nominal.
 A screening solenoid is placed around the Final Focus Quadrupoles to protect them from the experiment’s field. 
A skew quadrupole component is added to the Final Doublet, aligning the magnet axis to the rotated reference frame of the beam. 
Two anti-solenoids placed approximately ±20 m from the IP are used to cancel the field integral. The vertical orbit generated by the horizontal crossing angle in the detector field is compensated by vertical correctors placed right after the beam pipe separation and next to the final focus quadrupoles.
 We describe the IR optics in this scheme, including the detector solenoid and the magnetic elements used for compensation.

The Future Circular electron-positron Collider, FCC-ee, is a design study for a 90 km circumference luminosity-frontier and highest-energy e+e- collider. It foresees four operation modes optimized for producing different particles by colliding high-brightness lepton beams. Operating such a machine presents unique challenges, including stored beam energies up to 17.5 MJ, a value about two orders of magnitude higher than any lepton collider to date. Given the high stored beam energy, unavoidable beam losses pose a serious risk of damage. Thus, an adequate protection system has to be implemented. To address this challenge, a beam collimation system to protect the sensitive equipment of this machine is indispensable. This paper presents the studies that led to a new collimation system baseline and a collimation performance evaluation under selected beam loss scenarios.

The FCC-ee is a proposed high-luminosity circular electron-positron collider which will have beam energies spanning from 45.6 to 182.5 GeV, and will radiate up to 50 MW of synchrotron radiation power per beam. The lattice design upstream of the interaction point is based on weak dipoles and long straight sections combined with a 30 mrad crossing angle. The optics design provides a flat beam at the IP while integrating an anti-solenoid and detector solenoid. This paper summarizes the design principle and performance of the FCC-ee synchrotron radiation collimation scheme and provides insights into the synchrotron radiation simulations within the interaction region, conducted with BDSIM using the GEANT4 toolkit. Special attention is turned to the complexity of the transverse beam tails, including their width and particle density, representing valuable perspectives for the design of an effective synchrotron radiation collimation system.

DAFNE, the Frascati F-factory the collider where the Crab-Waist collision scheme has been implemented and successfully tested, is presently working for a physics program in the field of exotic atoms. The present scientific program foresees the study and the characterization of the never observed before kaonic deuterium. Providing a suitable data sample for such measurement requires the collider to provide the highest flux of k- meson and the lowest possible background shower on the detector. The operation strategy, and the collider setup in terms of collisions and beam dynamics are presented and discussed.

High currents of bunched electron and positron beams plan to be used in the proposed FCC-ee collider to achieve a high luminosity. Naturally, the impedance of the interaction region of the FCC must be as small as possible. Previously, a very smooth beam pipe in the interaction region was designed, and now we add necessary elements important for the beam operation, reduced backgrounds, and assembly. Among these elements are BPMs, expansion bellows, extension of the common beam pipe, and an elliptical synchrotron radiation mask. These new elements will be analyzed to see if they increase the impedance and, then, followed by discussions how to mitigate any issue.

This paper describes the mechanical design of the Future Circular Collider e+e- interaction region. The Future Circular Collider, as a forefront particle accelerator project, demands meticulous attention to the mechanical integrity and performance of its components, to the integration of the different systems and to the respect of the spatial constraint. The vacuum chamber design, the support tube and the bellows design are reported, highlighting the solutions adopted. The structural optimization method of the support structure is also presented, as well as the results obtained.