In the upcoming compact STorage ring for Accelerator Research and Technology (cSTART), LPA-like electron bunches are only stored for about 100 ms, in which the equilibrium emittance will not be reached. Therefore, to measure parameters such as bunch profiles, arrival times and bunch current losses, bunch-resolved diagnostics are needed. The booster synchrotron of the KARA accelerator accepts pre-accelerated bunches from a racetrack microtron and accelerates them further over a 500 ms long energy ramp. As the KARA booster synchrotron has a similar circumference and injection energy as the cSTART storage ring, new bunch-by-bunch diagnostics developed there can be transferred to the cSTART project with minimal effort. Currently the diagnostic system of the booster is not designed for bunch-by-bunch diagnostics, thus after using the booster as a testbed for cSTART, such a system could be used permanently. At the booster synchrotron we use the picosecond sampling system KAPTURE-II to read-out a button beam position monitor and an avalanche photo diode at the synchrotron light port and compare the results with a commercial bunch-by-bunch system.

At the Karlsruhe Research Accelerator (KARA) facility, an electron beam is generated by a thermionic electron gun, pre-accelerated to 53 MeV by a microtron and then ramped up to 500 MeV in a booster synchrotron before being injected into the storage ring, where a final electron energy of 2.5 GeV is reached. Compared to a 2D camera, when using 1D photodetectors either directly at the synchrotron light port or after a fiber optics segment, the optic design goal is to maximize the optical intensity at the photo detector, rather than to keep spacial coherence. In this field of non-imaging optics the emitter, optical setup and sink can be modeled in the optical phase space, with the etendue being the conserved quantity and position and angle the independent variables. In this contribution we describe the synchrotron radiation emitted at a dipole in the KARA booster synchrotron and the imaging setup into an optical multimode fiber with this formalism and compare the results with measurements at the synchrotron light port of the booster synchrotron.

In the upcoming compact STorage ring for Accelerator Research and Technology (cSTART), LPA-like electron bunches are only stored for about 100 ms, in which the equilibrium emittance will not be reached. Therefore, to measure parameters such as bunch profiles, arrival times and bunch current losses, bunch-resolved diagnostics are needed. The booster synchrotron of the KARA accelerator accepts pre-accelerated bunches from a racetrack microtron and accelerates them further over a 500 ms long energy ramp. As the KARA booster synchrotron has a similar circumference and injection energy as the cSTART storage ring, new bunch-by-bunch diagnostics developed there can be transferred to the cSTART project with minimal effort. Currently the diagnostic system of the booster is not designed for bunch-by-bunch diagnostics, thus after using the booster as a testbed for cSTART, such a system could be used permanently. At the booster synchrotron we use the picosecond sampling system KAPTURE-II to read-out a button beam position monitor and an avalanche photo diode at the synchrotron light port and compare the results with a commercial bunch-by-bunch system.