MC1: Circular and Linear Colliders
A03: Linear Colliders
Paper Title Page
WEPOPT023 A Design of ILC E-Driven Positron Source 1889
 
  • M. Kuriki, S. Konno, Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • M.K. Fukuda, T. Omori, Y. Seimiya, J. Urakawa, K. Yokoya
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • H. Tajino
    HU ADSE, Hiroshima, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
 
  ILC is an electron-positron linear collider based on Superconducting linear accelerator. Linear collider is an only solution to realinze high energy electron-positron collision beyond the limit of synchrotron radiation energy loss by ring colliders. Beam current of injector of linear colliders is much larger than that of ring colliders because the beam is not reusable. Providing an enough amount of particles, especially positron is a technical issue. In this article, we present a design of electron driven positron source for ILC. After optimizations, the system design is established with an enough technical margin, e.g. avoiding potential damage on the production target.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT023  
About • Received ※ 20 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 23 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOPT024 Beam Loading Compensation of Standing Wave Linac with Off-Crest Acceleration 1893
 
  • M. Kuriki, S. Konno, Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • M.K. Fukuda, T. Omori, Y. Seimiya, J. Urakawa, K. Yokoya
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • H. Tajino
    HU ADSE, Hiroshima, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
 
  In E-Driven positron source of ILC, the generated positron is captured by a standing wave cavity. Because the deceleration capture method is employed, the positron is off-crest over the linac. Because the beam-loading is expected to be more than 1A in a multi-bunch format, the compensation is essential to obtain uniform intensity over the pulse. A conventional method for the compensation controlling the timing doesn’t work because RF and Beam induced field are in different phase. In this manuscript, we discuss the compensation with the off-crest acceleration case. A simple phase modulation on the input RF is a solution.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT024  
About • Received ※ 20 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 16 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)