Paper | Title | Page |
---|---|---|
MOPOMS001 | Progress on Development of AXSIS: A Femtosecond THz-Driven MeV Accelerator and keV X-Ray Source | 621 |
|
||
Funding: This work was supported by KA908-12/1 of the Deutsche Forschungsgemeinschaft and by the ERC under the European Union’s Seventh Framework Program (FP7/2007-2013) through Synergy Grant AXSIS (609920). We report on the design and progress in implementing a THz-driven relativistic electron accelerator and associated X-ray source, the AXSIS Facility at DESY. We have developed a full layout of the machine based on a THz gun followed by a multi-cycle dielectric loaded metal waveguide THz linear accelerator to generate 20 MeV level, 10 fs electron bunches. The required THz pulse energies are on the mJ-level for the gun and multi-10-mJ-level for the THz linac. Customized laser technologies have been developed allowing for the generation of these pulses up to 1 kHz repetition rate. The generated electron bunches are then focused into a counter propagating optical pulse ’optical undulator’ to generate X-rays in the 6-7 keV range. We will discuss the overall layout of the machine, status of its implementation and technical challenges in the different components as well as diagnostics of this new type of accelerator and X-ray source. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS001 | |
About • | Received ※ 08 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 21 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOMS003 | Single-Sided Pumped Compact Terahertz Driven Booster Accelerator | 625 |
SUSPMF026 | use link to see paper's listing under its alternate paper code | |
|
||
Funding: European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013) through the Synergy Grant ’Frontiers in Attosecond X-ray Science: Imaging and Spectroscopy’ (609920). Scaling the RF-accelerator concept to terahertz (THz) frequencies brings several compelling advantages, including compactness, intrinsic timing between the photoemission and driving field sources, and high field gradients associated with the short THz wavelength and high breakdown threshold. Recent demonstrations of such THz powered accelerators relied on two counter-propagating single-cycle THz pulses. However, to achieve high energy gains in the acceleration process high energy THz pulses are needed which in turn require complex optical setups. Here, we present on the development of a matchbox sized multi-layered accelerator designed to boost the 50 keV output of a DC electron gun to energies of ~400 keV that only requires a single THz pulse to be powered. An integrated tunable mirror inside the structure interferes the front of the driving THz pulse with its rear part such that the field in the interaction region is optimized for efficient acceleration. This reduces the complexity of the required optical setup. Such a compact booster accelerator is very promising as electron source in ultrafast electron diffraction experiments and as booster stage prior to THz based LINACs. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS003 | |
About • | Received ※ 08 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 20 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOMS005 | Start-to-End Simulations of a THz-Driven ICS Source | 631 |
|
||
We present start-to-end simulations for a fully THz-driven table-top X-ray source. A dielectric-loaded metallic cavity operating at its Higher Order Mode accelerates 1 PC photo emitted electron bunch up to 430 keV kinetic energy. The output beam of the gun is injected into a dielectric-loaded waveguide where phase velocity of the traveling wave is adjusted in such a way that electrons see an accelerating field all the way along the tube resulting to an 18.5-MeV output beam which is then transported to an inverse Compton scattering (ICS) stage. The injection phase of the electrons can be tuned to introduce a negative energy chirp to the electron bunch leading to a ballistic bunch compression after the linac. In addition, a set of permanent magnet quadrupoles is designed to focus the beam at the ICS interaction point where the electron beam scatters off a 250-mJ, 0.5ps, 1-µm laser beam and generates an X-ray beam with 2.6x107 photons per shot containing photon energies 2keV< Eph <8keV in a beam with 50 mrad half opening angle. The required terahertz waves to power the gun and linac are 550-ps pulses at 300 GHz containing 5 mJ and 23 mJ energies respectively with 1 kHz repetition rate. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS005 | |
About • | Received ※ 08 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 25 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOMS007 | Optimized Dielectric Loaded Waveguide Terahertz LINACs | 634 |
SUSPMF028 | use link to see paper's listing under its alternate paper code | |
|
||
Dielectric loaded waveguides (DLW) powered by multicycle terahertz (THz) pulses have shown promising performance as compact linear accelerators due to higher breakdown fields at THz frequencies compared to conventional RF components. By changing the dielectric dimensions one can control phase and group velocities of the THz pulse inside the DLW. Since optimum waveguide dimensions are dependent on initial electron energy, THz pulse energy, and etc., it is worthwhile to determine optimum values for different conditions to maximize final kinetic energy. In this work, we present a combined analytical/numerical guide to determine the optimum DLW parameters for single on-axis electron acceleration. We also introduce normalized graphic representations to visualize optimum designs for different initial electron and THz pulse energies. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS007 | |
About • | Received ※ 09 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 21 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |