| Paper | Title | Page |
|---|---|---|
| WEPOTK061 | Lattice Design of the UVSORIV Storage Ring | 2205 |
|
||
| We are designing a storage ring lattice for the future plan of UVSOR. As a candidate, we have designed a storage ring of 1 GeV electron energy, which is higher than the present value, 750 MeV. The magnetic lattice is based on a compact double bend achromat cell, which consists of two bending magnets and four focusing magnets, all of which are of combined function. The circumference is around 82.5 m. The emittance is around 4 nm in the achromatic condition, which becomes lower in the non-achromatic condition. The lattice of 6-fold symmetry has six straight sections of 4 m long and six of 1.5 m long. Undulators can radiate nearly diffraction-limited light in VUV. If we install high field multipole wiggler at the short straight sections, they can provide high flux tender X-rays. We are expecting the usage of a laser-based accelerator as the injector, which might be developed in the next decade. As an alternative plan, we have designed a traditional injector, which consists of a linear accelerator and a booster synchrotron and can be constructed inside of the storage ring. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK061 | |
| About • | Received ※ 20 May 2022 — Revised ※ 13 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 30 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPOMS046 | Generation of Flat-Laser Compton Scattering Gamma-ray Beam in UVSOR | 3070 |
|
||
|
Funding: This work is supported by JSPS KAKENHI Grant Number 21H01859. A part of this work was performed at the BL1U of UVSOR, IMS, Okazaki (IMS program 21-603). Flat energy distribution Laser Compton scattering (F-LCS) gamma-ray beam, which has a flat distribution in the energy spectrum and the spatial distribution with a small beam size, has been developed to study an isotope selective CT Imaging application at the beamline BL1U in UVSOR. We have successfully demonstrated a three-dimensional (3D) isotope-selective CT image by using a conventional LCS gamma-ray beam[1]. However, the conventional LCS beam with a small beam size whose energy spread is narrow can’t excite a few isotopes at the same time. Therefore, we proposed the F-LCS gamma-ray beam by using the Apple-II undulator installed in BL1U in UVSOR to excite a circular motion of the electron beam. An EGS5 simulation shows that a weak magnetic field (K=0.2) can generate an F-LCS beam. The demonstration experiments have been carried out in UVSOR and the spectra of generated LCS beam with different K-values of the undulator were measured. As a result, the measured spectra agreed with the EGS5 simulation. The principle of F-LCS generation and experimental results, including the effect on the stored electron beam, will be presented at the conference. [1] K. Ali, et. al., "Three-dimensional nondestructive isotope-selective tomographic imaging of 208Pb distribution via nuclear resonance fluorescence". Appl. Sci. 2021, 11, 3415. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOMS046 | |
| About • | Received ※ 02 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 16 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |