IPAC2022 - List of Authors (Schlander, F.)

Paper	Title	Page
TUPOTK026	ESS Elliptical Cryomodules Tests at Lund Test Stand	1261
	C.G. Maiano, E. Asensi Conejero, N. Elias, P. Goudket, W. Hees, P. Pierini, L. Sagliano, F. Schlander, M.Y. Wang ESS, Lund, Sweden D. Bocian, W. Gaj, P. Halczynski, M. Sienkiewicz, F.D. Skalka, J. Swierblewski, K.M. Wartak, M. Wartak IFJ-PAN, Kraków, Poland
	We present an overview and description of the elliptical cryomodules test activities at Lund Test Stand 2. During 2021 the test facility was commissioned with one prototype, and four series medium beta modules have now been successfully tested at ESS in Lund. This activity allowed the joint ESS and IFJ PAN team to develop all the procedures and the necessary automated tools for the different phases of the site acceptance test campaign (e.g. incoming inspections, coupler conditioning, cooldown strategies, tuning to resonance and electromagnetic/cryogenic performance verification). During the initial test period techniques for diagnostics of limiting mechanisms have been developed and improved up to a consolidated and mature state for the rest of the test campaign. Tests results and the initial statistics is presented and commented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOTK026
About •	Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 16 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST038	On-Site Transport and Handling Tests of Cryomodules for the European Spallation Source	2527
	F. Schlander, A. Bignami, N. Gazis ESS, Lund, Sweden
	The cryomodules for the superconducting Linac of the European Spallation Source ’ ESS are now arriving in a steady stream and the long-distance transport requirements are well understood. For the on-site transportation, handling and storage, several challenges have risen, including the intermediate storage of cryomodules before testing and/or installation. In comparison to the long-distance transports, the cryomodule on-site transports and respective handling until installation take place with specialised and limited transport protection. This requires additional measures and tests of those handling steps with extended diagnostics, to make sure that handling and transport refrains from damages on the last mile. Those handling procedures and executed tests will be described in this contribution.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST038
About •	Received ※ 07 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 25 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ESS Elliptical Cryomodules Tests at Lund Test Stand

1261

C.G. Maiano, E. Asensi Conejero, N. Elias, P. Goudket, W. Hees, P. Pierini, L. Sagliano, F. Schlander, M.Y. Wang
ESS, Lund, Sweden
D. Bocian, W. Gaj, P. Halczynski, M. Sienkiewicz, F.D. Skalka, J. Swierblewski, K.M. Wartak, M. Wartak
IFJ-PAN, Kraków, Poland

We present an overview and description of the elliptical cryomodules test activities at Lund Test Stand 2. During 2021 the test facility was commissioned with one prototype, and four series medium beta modules have now been successfully tested at ESS in Lund. This activity allowed the joint ESS and IFJ PAN team to develop all the procedures and the necessary automated tools for the different phases of the site acceptance test campaign (e.g. incoming inspections, coupler conditioning, cooldown strategies, tuning to resonance and electromagnetic/cryogenic performance verification). During the initial test period techniques for diagnostics of limiting mechanisms have been developed and improved up to a consolidated and mature state for the rest of the test campaign. Tests results and the initial statistics is presented and commented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOTK026

About •

Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 16 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST038

On-Site Transport and Handling Tests of Cryomodules for the European Spallation Source

2527

F. Schlander, A. Bignami, N. Gazis
ESS, Lund, Sweden

The cryomodules for the superconducting Linac of the European Spallation Source ’ ESS are now arriving in a steady stream and the long-distance transport requirements are well understood. For the on-site transportation, handling and storage, several challenges have risen, including the intermediate storage of cryomodules before testing and/or installation. In comparison to the long-distance transports, the cryomodule on-site transports and respective handling until installation take place with specialised and limited transport protection. This requires additional measures and tests of those handling steps with extended diagnostics, to make sure that handling and transport refrains from damages on the last mile. Those handling procedures and executed tests will be described in this contribution.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST038

About •

Received ※ 07 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 25 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)