| Paper | Title | Page |
|---|---|---|
| WEPOST026 | Conceptual Design of the FCC-ee Beam Dumping System | 1753 |
| SUSPMF002 | use link to see paper's listing under its alternate paper code | |
|
||
| The Future Circular electron-positron Collider (FCC-ee) will have stored beam energies of up to 20 MJ. This is a factor 100 higher than any current or past lepton collider. A safe and reliable disposal of the beam onto a beam dump block is therefore critical for operation. To ensure the survival of the dump core blocks, transversal dilution of the beam is necessary. To reduce the complexity of the system and guarantee high availability, an optimized, semi-passive beam dumping system has been designed. The main dump absorber design has been optimized following recent studies for high energy dump block materials for the LHC High Luminosity upgrade. First simulations regarding the radiation environment of the dumping system have been carried out, allowing the definition of preliminary constraints for the integration with respect to radiation sensitive equipment. The performance of the system has been evaluated using Monte-Carlo simulations as well as thermomechanical Finite-Element-Analysis to investigate potential material failure and assess safety margins. An experiment at the CERN HiRadMat facility has been carried out and preliminary results show good agreement with simulations. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST026 | |
| About • | Received ※ 07 June 2022 — Revised ※ 16 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 25 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOPT063 | The FCCee Pre-Injector Complex | 2007 |
|
||
| The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. The entire beam dynamics studies for the full linac, damping ring and transfer lines are major activities of the injector complex design. A key point is that any increase of positron production and capture efficiency reduces the cost and complexity of the driver linac, the heat and radiation load of the converter system, and increases the operational margin. In this paper we will give an overview of the status of the injector complex design and introduce the new layout that has been proposed by the study group working in the context of the CHART collaboration. In this framework, furthermore, we also present the preliminary studies of the FCC-ee positron source highlighting the main requirements and constraints. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT063 | |
| About • | Received ※ 11 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 29 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |