Author: MacArthur, J.P.
Paper Title Page
TUPOPT036 Two and Multiple Bunches with the LCLS Copper Linac 1089
 
  • F.-J. Decker, W.S. Colocho, A. Halavanau, A.A. Lutman, J.P. MacArthur, G. Marcus, R.A. Margraf, J.C. Sheppard, J.J. Turner, S. Vetter
    SLAC, Menlo Park, California, USA
 
  Two, four, and even eight bunches were accelerated through the copper linac. Two and four bunches were delivered successfully to photon experiments in both the hard (HXR) and soft (SXR) LCLS x-ray lines. In this paper we will concentrate on the more challenging issues, such as: the BPM deconvolution for both bunches, RF kicks at longer separations, tuning challenges, bridging the communications gap between the photon and electron side, the lower bunch charges for the eight bunch case, and rapid timing scans over several ns. We will describe some of the developed solutions and plans for the rest.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT036  
About • Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 28 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPOPT039 Characterization of Diamond with Buried Boron-Doped Layer Developed for Q-Switching an X-Ray Optical Cavity 1097
 
  • R.A. Margraf, A. Halavanau, Z. Huang, J. Krzywiński, J.P. MacArthur, G. Marcus, M.L. Ng, A.R. Robert, R. Robles, T. Sato, D. Zhu
    SLAC, Menlo Park, California, USA
  • Z. Huang, F. Ke, R. Robles, Y. Zhong
    Stanford University, Stanford, California, USA
  • S.-K. Mo, Y. Zhong
    LBNL, Berkeley, California, USA
  • P. Pradhan
    ANL, Lemont, Illinois, USA
  • A.R. Robert
    MAX IV Laboratory, Lund University, Lund, Sweden
  • M.D. Ynsa
    UAM, Madrid, Spain
 
  Funding: This work was supported by the Department of Energy, Laboratory Directed Research and Development program at SLAC National Accelerator Laboratory, under contract DE-AC02-76SF00515.
X-ray Free-Electron Laser Oscillators (XFELOs) and X-ray Regenerative Amplifier FELs (XRAFELs) are currently in development to improve longitudinal coherence and spectral brightness of XFELs. These schemes lase an electron beam in an undulator within an optical cavity to produce X-rays. X-rays circulate in the cavity and interact with fresh electron bunches to seed the FEL process over multiple passes, producing progressively brighter and more spectrally pure X-rays. Typically, the optical cavities used are composed of Bragg-reflecting mirrors to provide high reflectivity and spectral filtering. This high reflectivity necessitates special techniques to out-couple X-rays from the cavity to deliver them to users. One method involves "Q-switching" the cavity by actively modifying the reflectivity of one Bragg-reflecting crystal. To control the crystal lattice constant and thus reflectivity, we use an infrared laser to heat a buried boron layer in a diamond crystal. Here, we build on earlier work in Krzywinski et al.* and present the current status of our Q-switching diamond, including implantation with 9 MeV boron ions, annealing, characterization and early tests.
*Krzywinski et al., "Q-switching of X-Ray Optical Cavities by using Boron Doped Buried Layer under a Surface of a Diamond Crystal," Proceedings of FEL2019, Hamburg, Germany, TUP033, 2019.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT039  
About • Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 08 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)