Author: Kuriki, M.
Paper Title Page
MOPOTK066 Damping-Ring-Free Injector Design for Linear Colliders 614
 
  • T. Xu, P. Piot
    Northern Illinois University, DeKalb, Illinois, USA
  • S.Y. Kim, P. Piot, J.G. Power
    ANL, Lemont, Illinois, USA
  • M. Kuriki
    HU/AdSM, Higashi-Hiroshima, Japan
  
  Funding: This work was supported by the US DOE contracts # DE-SC0018656 and # DE-SC0018234 (U.S.-Japan Science & Technology Cooperation Program in HEP) with NIU and No.DE-AC02-06CH11357 with ANL.
The current designs of future electron-positron linear colliders incorporate large and complex damping rings to produce asymmetric beams for beamstrahlung mitigation at the interaction point. This paper presents the design of an damping-ring-free electron injector capable of delivering flat electron beams with phase-space partition comparable to the electron-beam parameters produced downstream of the damping ring in the proposed international linear collider (ILC) design. The performance of the proposed configuration, its sensitivity to jitter along with its impact on spin-polarization is discussed. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK066  
About • Received ※ 07 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 13 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOPT023 A Design of ILC E-Driven Positron Source 1889
 
  • M. Kuriki, S. Konno, Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • M.K. Fukuda, T. Omori, Y. Seimiya, J. Urakawa, K. Yokoya
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • H. Tajino
    HU ADSE, Hiroshima, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  
  ILC is an electron-positron linear collider based on Superconducting linear accelerator. Linear collider is an only solution to realinze high energy electron-positron collision beyond the limit of synchrotron radiation energy loss by ring colliders. Beam current of injector of linear colliders is much larger than that of ring colliders because the beam is not reusable. Providing an enough amount of particles, especially positron is a technical issue. In this article, we present a design of electron driven positron source for ILC. After optimizations, the system design is established with an enough technical margin, e.g. avoiding potential damage on the production target.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT023  
About • Received ※ 20 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 23 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOPT024 Beam Loading Compensation of Standing Wave Linac with Off-Crest Acceleration 1893
 
  • M. Kuriki, S. Konno, Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • M.K. Fukuda, T. Omori, Y. Seimiya, J. Urakawa, K. Yokoya
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • H. Tajino
    HU ADSE, Hiroshima, Japan
  • T. Takahashi
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  
  In E-Driven positron source of ILC, the generated positron is captured by a standing wave cavity. Because the deceleration capture method is employed, the positron is off-crest over the linac. Because the beam-loading is expected to be more than 1A in a multi-bunch format, the compensation is essential to obtain uniform intensity over the pulse. A conventional method for the compensation controlling the timing doesn’t work because RF and Beam induced field are in different phase. In this manuscript, we discuss the compensation with the off-crest acceleration case. A simple phase modulation on the input RF is a solution.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT024  
About • Received ※ 20 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 16 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOPT025 Flat Beam Generation with the Phase Space Rotation Technique at KEK-STF 1897
 
  • M. Kuriki, Z.J. Liptak
    HU/AdSM, Higashi-Hiroshima, Japan
  • S. Aramoto
    Hiroshima University, Higashi-Hiroshima, Japan
  • H. Hayano, X.J. Jin, Y. Seimiya, N. Yamamoto, Y. Yamamoto
    KEK, Ibaraki, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • K. Sakaue
    The University of Tokyo, Graduate School of Engineering, Bunkyo, Japan
  • M. Washio
    RISE, Tokyo, Japan
  
  Flat beam generation from angular momentum dominated beam with a phase-space rotation technique is an unique method to manipulate the phase-space distribution of beam. As an application, the asymmetric emittance beam generation for linear colliders is considered to compensate the Beamstrahlung effect at Interaction point. By using this technique, the asymmetric beam can be generated directly with the injector, instead of radiation damping with a huge damping ring. We present the result of a proof-of-principle experiment at KEK-STF.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT025  
About • Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 23 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)