IPAC2022 - List of Authors (Harrig, K.P.)

Paper	Title	Page
WEPOTK053	Simulation of Bunch Formation for the Mu2e Experiment	2180
	K.P. Harrig, E. Prebys UCD, Davis, California, USA V.P. Nagaslaev, S.J. Werkema Fermilab, Batavia, Illinois, USA
	Funding: Grant DE-SC0019254, The U.S. Department of Energy, Office of Science and Fermi Research Alliance, LLC Contract No. DE-AC02-07CH11359 The Fermilab Recycler is an 8 GeV storage ring composed of permanent magnets that was crucial to the success of the Fermilab Tevatron Collider program. It is currently being used to slip-stack protons for the high energy neutrino program and to re-bunch protons for use in the Muon g-2 and Mu2e experiments. For the latter applications, the Recycler re-bunches each 1.6 µs "batch" from the Fermilab Booster into four 2.5 MHz bunches. For the Mu2e experiment, it is crucial that beam more than 125 ns from the nominal bunch center be suppressed by at least a factor of 1E-5. While bunch formation is currently in operation for the g-2 experiment, this out of time requirement has not been met, and the reason is not understood. This work presents a simulation of bunch formation in the Recycler, in an effort to understand the reason for this excessive out of time beam and to search for a way to reduce it.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK053
About •	Received ※ 30 May 2022 — Revised ※ 16 June 2022 — Accepted ※ 23 June 2022 — Issue date ※ 11 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK023	Ferrite Specification for the Mu2e 300 kHz and 4.4 MHz AC Dipole Magnets	2816
SUSPMF116	use link to see paper's listing under its alternate paper code
	K.P. Harrig, E. Prebys UCD, Davis, California, USA L. Elementi, C.C. Jensen, H. Pfeffer, D.A. Still, I. Terechkine, S.J. Werkema, M. Wong Fermilab, Batavia, Illinois, USA
	Funding: Work supported by by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, in addition to grant DE-SC0019254. The Mu2e experiment at Fermilab will measure the rate for neutrinoless-conversion of negative muons into electrons with never-before-seen precision. This experiment will use a pulsed 8 GeV proton beam with pulses separated by 1.7 µs. To suppress beam induced backgrounds to this process, a set of dipoles operating at 300 kHz and 4.4 MHz have been developed that will reduce the fraction of out-of-time protons at the level of 1E-10 or less. Selection of magnetic ferrite material for construction must be carefully considered given the high repetition rate and duty cycle that can lead to excess heating in conventional magnetic material. A model of the electromagnetic and thermal properties of candidate ferrite materials has been constructed. Magnetic permeability, inductance, and power loss were measured at the two operating frequencies in toroidal ferrite samples as well as in the ferrites from which prototype magnets were built. Additionally, the outgassing rates of the ferrite material was measured to determine vacuum compatibility. The outcome of this work is a detailed specification of the electrical and mechanical details of the ferrite material required for this application.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK023
About •	Received ※ 30 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 23 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation of Bunch Formation for the Mu2e Experiment

2180

K.P. Harrig, E. Prebys
UCD, Davis, California, USA
V.P. Nagaslaev, S.J. Werkema
Fermilab, Batavia, Illinois, USA

Funding: Grant DE-SC0019254, The U.S. Department of Energy, Office of Science and Fermi Research Alliance, LLC Contract No. DE-AC02-07CH11359
The Fermilab Recycler is an 8 GeV storage ring composed of permanent magnets that was crucial to the success of the Fermilab Tevatron Collider program. It is currently being used to slip-stack protons for the high energy neutrino program and to re-bunch protons for use in the Muon g-2 and Mu2e experiments. For the latter applications, the Recycler re-bunches each 1.6 µs "batch" from the Fermilab Booster into four 2.5 MHz bunches. For the Mu2e experiment, it is crucial that beam more than 125 ns from the nominal bunch center be suppressed by at least a factor of 1E-5. While bunch formation is currently in operation for the g-2 experiment, this out of time requirement has not been met, and the reason is not understood. This work presents a simulation of bunch formation in the Recycler, in an effort to understand the reason for this excessive out of time beam and to search for a way to reduce it.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK053

About •

Received ※ 30 May 2022 — Revised ※ 16 June 2022 — Accepted ※ 23 June 2022 — Issue date ※ 11 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOTK023

Ferrite Specification for the Mu2e 300 kHz and 4.4 MHz AC Dipole Magnets

2816

SUSPMF116

use link to see paper's listing under its alternate paper code

K.P. Harrig, E. Prebys
UCD, Davis, California, USA
L. Elementi, C.C. Jensen, H. Pfeffer, D.A. Still, I. Terechkine, S.J. Werkema, M. Wong
Fermilab, Batavia, Illinois, USA

Funding: Work supported by by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, in addition to grant DE-SC0019254.
The Mu2e experiment at Fermilab will measure the rate for neutrinoless-conversion of negative muons into electrons with never-before-seen precision. This experiment will use a pulsed 8 GeV proton beam with pulses separated by 1.7 µs. To suppress beam induced backgrounds to this process, a set of dipoles operating at 300 kHz and 4.4 MHz have been developed that will reduce the fraction of out-of-time protons at the level of 1E-10 or less. Selection of magnetic ferrite material for construction must be carefully considered given the high repetition rate and duty cycle that can lead to excess heating in conventional magnetic material. A model of the electromagnetic and thermal properties of candidate ferrite materials has been constructed. Magnetic permeability, inductance, and power loss were measured at the two operating frequencies in toroidal ferrite samples as well as in the ferrites from which prototype magnets were built. Additionally, the outgassing rates of the ferrite material was measured to determine vacuum compatibility. The outcome of this work is a detailed specification of the electrical and mechanical details of the ferrite material required for this application.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK023

About •

Received ※ 30 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 23 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)