Paper | Title | Page |
---|---|---|
MOPOTK001 | The Influence of Solenoid Field on Off-Axis Travelling Beam in AREAL Accelerator | 422 |
|
||
A wide range of experiments are being held at AREAL accelerator in the fields of materials science and life sci-ence by generating ultra-short 5 MeV electron beams. Beam parameter formation and stability preservation during the experiments are one of the key tasks of stable operation of the accelerator. Laser spot displacement on the photocathode could be one of the beam parameter distortion sources, which causes off-axis bunch travel also through the solenoid. The influences of laser spot horizontal displacement and the solenoid horizontal misalignment on the beam position at the experiment location are investigated separately via computer simulations. Using a laser spot mover and solenoid movers, an experiment has been carried out to compare simulation results with experiment.
*davtyan@asls.candle.am |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK001 | |
About • | Received ※ 07 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 02 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOTK003 | Absorbed Dose Characteristics for Irradiation Experiments at AREAL 5 MeV Electron Linac | 429 |
|
||
Existing electron photogun facility at the CANDLE SRI currently can provide electron beam with the energy up to 5 MeV. The beam is being used as an irradiation source in the number of material science and life science experiments. Performed beam particle tracking simulations along with intensive application of the beam diagnostic instruments (bending magnet, YAG stations, Faraday cups) allow control of the experimental samples’ irradiation parameters, particularly exposure times for given dose as well as absorbed dose spatial distribution. Direct application of the electron beam for the irradiation experiments allows achievement of high absorbed dose. For the calculation of the irradiation parameters of the experimental samples’ particle transport simulation results should be combined with the beam current measurements by Faraday Cup (FC). Dose measurements and the comparison with numerical simulations using various initial parameters (Transverse size, divergence and energy spread) permit to pin down their actual values. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK003 | |
About • | Received ※ 03 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 02 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPOPT069 | Preparation and Characterization of BTO-BFO Multiferroic Ceramics as Electrical Controllable Fast Phase Shifting Component | 1178 |
|
||
A rich variety of dielectric, optical, acoustic/piezoelectric, ferromagnetic properties of ferroelectric and multiferroic composite materials open a new perspective for the development of modern accelerators with new principle of electron acceleration and control system. These properties may be controlled by external electric fields. In particular, the production of electric field controlling ultrafast facilities for 0.7-20 GHz RF phase shifting and amplitude modulation where a very short response time of <10 nsec is required . A Self-propagating High-temperature Synthesis (SHS) technology for obtaining ceramic materials, based on (1-x)BiFeO3-xBaTiO3 compositions with various dopant (MgO, MnO, etc.), has been developed. The general parameters of the SHS process (temperature and propagation velocity of the combustion front) are measured. The dependences of microstructure (grain size, density, and porosity), as well as electro physical properties of the sintered samples on compaction and sintering thermodynamic variables, such as the pressing pressure and duration, sintering temperature, sintering duration and atmosphere, heating and cooling rates, are experimentally investigated.
* https://doi.org/10.3390/coatings11010066 ** Appl. Phys. Let., V.101, p. 232903-5, 2012 *** A. Kanareykin & et al. FERROELECTRIC BASED HIGH POWER TUNER FOR L-BAND ACCELERATOR APPLICATIONS. IPAC2013 |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT069 | |
About • | Received ※ 31 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 11 June 2022 — Issue date ※ 12 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOTK037 | Radiation of a Particle Moving Along a Helical Trajectory in a Resistive-Wall Cylindrical Waveguide | 2150 |
|
||
Funding: The work was supported by the Science Committee of RA, in the frames of the research project 21T-1C239 The radiation field of a particle moving on a helical trajectory in a cylindrical waveguide with resistive walls is calculated. The deformation of the energy spectrum of radiation, as a result of the finite conductivity of the walls, is investigated. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK037 | |
About • | Received ※ 31 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 30 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOTK039 | Radiation of a Particle Moving Along a Helical Trajectory in a Semi-Infinite Cylindrical Waveguide | 2154 |
|
||
Funding: The work was supported by the Science Committee of RA, in the frames of the research project 21T-1C239 The radiation field of a particle which suddenly appears in an ideal waveguide and moves on a helical trajectory under the influence ofexternal magnetic fields is calculated. The shape and character of the front of the propagating wave is determined. The time dependence of radiation energy accumulated in the waveguide is investigated. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK039 | |
About • | Received ※ 31 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 05 July 2022 — Issue date ※ 06 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |