IPAC2022 - List of Authors (Duda, M.)

Paper	Title	Page
WEPOPT062	Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device	2003
	Y. Zhao, S. Döbert, A. Latina, S. Ogur CERN, Meyrin, Switzerland B. Auchmann, P. Craievich, J. Kosse, R. Zennaro PSI, Villigen PSI, Switzerland I. Chaikovska, R. Chehab Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France M. Duda IFJ-PAN, Kraków, Poland P.V. Martyshkin BINP SB RAS, Novosibirsk, Russia
	In this paper, we present the simulation and optimisation of the FCC-ee positron source, where a high-temperature superconducting (HTS) solenoid is used as the matching device to collect positrons from the target. The "conventional" target scheme is used which simply consists of amorphous tungsten. The target is placed inside the bore of the HTS solenoid to improve the accepted positron yield at the entrance of the damping ring and the location of the target is optimised. The latest recommended baseline beam parameters are used and presented. An optimisation of the ideal positron yield using the analytic SC solenoid on-axis field is also performed and shows that the design of the HTS solenoid is optimal as far as the accepted positron yield is concerned.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT062
About •	Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 16 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOPT063	The FCCee Pre-Injector Complex	2007
	P. Craievich, B. Auchmann, S. Bettoni, H.-H. Braun, M. Duda, D. Hauenstein, E. Hohmann, R. Ischebeck, P.N. Juranič, J. Kosse, G.L. Orlandi, M. Pedrozzi, J.-Y. Raguin, S. Reiche, S.T. Sanfilippo, M. Schaer, N. Vallis, R. Zennaro PSI, Villigen PSI, Switzerland F. Alharthi, I. Chaikovska, S. Ogur Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France W. Bartmann, M. Benedikt, M.I. Besana, M. Calviani, S. Döbert, Y. Dutheil, O. Etisken, J.L. Grenard, A. Grudiev, B. Humann, A. Latina, A. Lechner, K. Oide, A. Perillo-Marcone, H.W. Pommerenke, R.L. Ramjiawan, Y. Zhao, F. Zimmermann CERN, Meyrin, Switzerland A. De Santis INFN/LNF, Frascati, Italy Y. Enomoto, K. Furukawa, K. Oide KEK, Ibaraki, Japan O. Etisken Kirikkale University, Kirikkale, Turkey C. Milardi LNF-INFN, Frascati, Italy T.O. Raubenheimer SLAC, Menlo Park, California, USA N. Vallis EPFL, Lausanne, Switzerland
	The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. The entire beam dynamics studies for the full linac, damping ring and transfer lines are major activities of the injector complex design. A key point is that any increase of positron production and capture efficiency reduces the cost and complexity of the driver linac, the heat and radiation load of the converter system, and increases the operational margin. In this paper we will give an overview of the status of the injector complex design and introduce the new layout that has been proposed by the study group working in the context of the CHART collaboration. In this framework, furthermore, we also present the preliminary studies of the FCC-ee positron source highlighting the main requirements and constraints.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT063
About •	Received ※ 11 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 29 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device

2003

Y. Zhao, S. Döbert, A. Latina, S. Ogur
CERN, Meyrin, Switzerland
B. Auchmann, P. Craievich, J. Kosse, R. Zennaro
PSI, Villigen PSI, Switzerland
I. Chaikovska, R. Chehab
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
M. Duda
IFJ-PAN, Kraków, Poland
P.V. Martyshkin
BINP SB RAS, Novosibirsk, Russia

In this paper, we present the simulation and optimisation of the FCC-ee positron source, where a high-temperature superconducting (HTS) solenoid is used as the matching device to collect positrons from the target. The "conventional" target scheme is used which simply consists of amorphous tungsten. The target is placed inside the bore of the HTS solenoid to improve the accepted positron yield at the entrance of the damping ring and the location of the target is optimised. The latest recommended baseline beam parameters are used and presented. An optimisation of the ideal positron yield using the analytic SC solenoid on-axis field is also performed and shows that the design of the HTS solenoid is optimal as far as the accepted positron yield is concerned.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT062

About •

Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 16 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOPT063

The FCCee Pre-Injector Complex

2007

P. Craievich, B. Auchmann, S. Bettoni, H.-H. Braun, M. Duda, D. Hauenstein, E. Hohmann, R. Ischebeck, P.N. Juranič, J. Kosse, G.L. Orlandi, M. Pedrozzi, J.-Y. Raguin, S. Reiche, S.T. Sanfilippo, M. Schaer, N. Vallis, R. Zennaro
PSI, Villigen PSI, Switzerland
F. Alharthi, I. Chaikovska, S. Ogur
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
W. Bartmann, M. Benedikt, M.I. Besana, M. Calviani, S. Döbert, Y. Dutheil, O. Etisken, J.L. Grenard, A. Grudiev, B. Humann, A. Latina, A. Lechner, K. Oide, A. Perillo-Marcone, H.W. Pommerenke, R.L. Ramjiawan, Y. Zhao, F. Zimmermann
CERN, Meyrin, Switzerland
A. De Santis
INFN/LNF, Frascati, Italy
Y. Enomoto, K. Furukawa, K. Oide
KEK, Ibaraki, Japan
O. Etisken
Kirikkale University, Kirikkale, Turkey
C. Milardi
LNF-INFN, Frascati, Italy
T.O. Raubenheimer
SLAC, Menlo Park, California, USA
N. Vallis
EPFL, Lausanne, Switzerland

The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. The entire beam dynamics studies for the full linac, damping ring and transfer lines are major activities of the injector complex design. A key point is that any increase of positron production and capture efficiency reduces the cost and complexity of the driver linac, the heat and radiation load of the converter system, and increases the operational margin. In this paper we will give an overview of the status of the injector complex design and introduce the new layout that has been proposed by the study group working in the context of the CHART collaboration. In this framework, furthermore, we also present the preliminary studies of the FCC-ee positron source highlighting the main requirements and constraints.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT063

About •

Received ※ 11 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 29 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)