Paper | Title | Page |
---|---|---|
MOPOMS019 | The New SPARC_LAB RF Photo-Injector | 671 |
|
||
A new RF photo-injector has been designed, realized and successfully installed at the SPARC_LAB facility (INFN-LNF, Frascati, Rome). It is based on a 1.6 cell RF gun fabricated with the new brazing free technology recently developed at the National Laboratories of Frascati. The electromagnetic design has been optimized to have a full compensation of the dipole and quadrupole field components introduced by the coupling hole with an improvement of the effective pumping speed with two added pumping ports. The gun is overcoupled (\beta=2) to reduce the filling time and to allow the operation with short RF pulses. The overall injector integrates a new solenoid with a remote control of the transverse position and a variable skew quadrupole for the compensation of residual quadrupole field components. It also allows an on axis laser injection system with the last mirror in air, and the possibility of a future integration of an X/C band cavity linearizer. In the paper we report the main characteristics of the electromagnetic and mechanical design and the low and high power test results that shows the extremely good perfomances of the new device. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS019 | |
About • | Received ※ 07 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 26 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOMS020 | Dark Current Studies for a High Gradient SW C-Band RF Gun | 675 |
|
||
It is now well-established that for the generation of very high brightness beams, required for fourth generation light sources, it is highly advantageous to use injectors based on Radiofrequency photo-guns with very high peak electric fields on the cathode (>120 MV/m). This very high surface electric field leads to the generation of undesirable electrons due to the field emission effect. The emitted electrons can be captured and propagate along the Linac forming a dark current beam, leading to background radiation that can damage the instrumentation and radioactivate components. Consequently, it is important that the emission of these electrons, and their subsequent transportation, is carefully evaluated. Recently, in the framework of the I-FAST project, a high gradient, standing wave, C-band (5712 MHz) RF photogun has been designed and will be realized soon. In this paper, the results of dark current studies and simulations are illustrated. The transport efficiency and the spectrum of the dark current have been evaluated by Particle-In-Cell simulations for different cathode peak field values considering also the effect of the focusing solenoid on the dark current beam. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS020 | |
About • | Received ※ 08 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 30 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOMS021 | The New C Band Gun for the Next Generation RF Photo-Injectors | 679 |
|
||
Funding: European Union’s Horizon 2020 Research and Innovation programme under GA No 101004730 and INFN Commission V. RF photo-injectors are widely used in modern facilities, especially in FEL, as very low-emittance and high-brightness electron sources. Presently, the RF technology mostly used for RF guns is the S band (3 GHz) with typical cathode peak fields of 80-120 MV/m and repetition rates lower than 120 Hz. There are solid reasons to believe that the frequency step-up from S band to C band (6 GHz) can provide a strong improvement of the beam quality due to the potential higher achievable cathode field (>160 MV/m) and higher repetition rate (that can reach the kHz level). In the contest of the European I.FAST project, a new C band gun has been designed and will be realized and tested. It is a 2.5 cell standing wave cavity with a four port mode launcher, designed to operate with short RF pulses (<300 ns) and cathode peak field larger than 160 MV/m. In the paper we present the electromagnetic and thermo-mechanical design and the results of the prototyping activity and rf measurements. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS021 | |
About • | Received ※ 07 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 28 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |