Author: Danzeca, S.
Paper Title Page
MOPOMS044 Implications and Mitigation of Radiation Effects on the CERN SPS Operation during 2021 740
 
  • Y.Q. Aguiar, A. Apollonio, K. Biłko, M. Brucoli, M. Cecchetto, S. Danzeca, R. García Alía, T. Ladzinski, G. Lerner, J.B. Potoine, A. Zimmaro
    CERN, Meyrin, Switzerland
 
  During the Long Shutdown 2 (LS2, 2019-2020), the CERN accelerator complex has undergone major upgrades, mainly in preparation for the High-Luminosity (HL) LHC era, the ultimate capacity for its physics production. Therefore, several novel equipment and systems were designed and deployed throughout the accelerator complex. To comply with the radiation level specifications and avoid machine downtime due to radiation effects, the electronics systems exposed to radiation need to follow Radiation Hardness Assurance (RHA) methodologies developed and validated by the Radiation to Electronics (R2E) project at CERN. However, the establishment of such procedures is not yet fully implemented in the LHC injector chain, and some R2E failures were detected in the SPS during the 2021 operation. This work is devoted to describing and analysing the R2E failures and their impact on operation, in the context of the related radiation levels and equipment sensitivity.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS044  
About • Received ※ 07 June 2022 — Revised ※ 21 June 2022 — Accepted ※ 26 June 2022 — Issue date ※ 08 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUOXGD2 Wireless IoT in Particle Accelerators: A Proof of Concept with the IoT Radiation Monitor at CERN 772
 
  • S. Danzeca, A.J. Cass, A. Masi, R. Sierra, A. Zimmaro
    CERN, Meyrin, Switzerland
 
  The Internet of Things (IoT) is an ecosystem of web-enabled "smart devices" that integrates sensors and communication hardware to collect, send and act on data acquired from the surrounding environment. Use of the IoT in particle accelerators is not new, with accelerator systems long having been connected to the network to retrieve, send and analyse data. What has been missing is the IoT concept of "smart devices" and above all wireless connectivity. We report here on the advantages of using a particular IoT technology, LoRa, for the deployment of wireless radiation monitors within the CERN particle accelerator complex. IoT Radiation Monitors have been developed as a result of growing demand for radiation measurements where standard infrastructure is not available. As a radiation-tolerant device, the IoT Radiation Monitor is a powerful "eye" for observing the real-time radiation levels in the CERN accelerators. We describe here the technologies used for the project and the various advantages their deployment offers in a particle accelerator environment. This opens up the possibility for the deployment of heterogeneous implementations that would otherwise have been impractical.  
slides icon Slides TUOXGD2 [5.797 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUOXGD2  
About • Received ※ 07 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 17 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOST012 Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM 1703
 
  • M.A. Fraser, P.A. Arrutia Sota, K. Biłko, N. Charitonidis, S. Danzeca, M. Delrieux, M. Duraffourg, N. Emriskova, L.S. Esposito, R. García Alía, A. Guerrero, O. Hans, G.I. Imesch, E.P. Johnson, G. Lerner, I. Ortega Ruiz, G. Pezzullo, D. Prelipcean, F. Ravotti, F. Roncarolo, A. Waets
    CERN, Meyrin, Switzerland
 
  The CHARM High-energy Ions for Micro Electronics Reliability Assurance (CHIMERA) working group at CERN is investigating the feasibility of delivering high energy ion beams to the CHARM facility for the study of radiation effects to electronics components engineered to operate in harsh radiation environments, such as space or high-energy accelerators. The Proton Synchrotron has the potential of delivering the required high energy and high-Z (in this case, Pb) ions for radiation tests over the relevant range of Linear Energy Transfer of ~ 10 - 40 MeV cm2/mg with a > 1 mm penetration depth in silicon, specifically for single event effect tests. This contribution summarises the working group’s progress in demonstrating the feasibility of variable energy slow extraction and over a wide range of intensities. The results of a dedicated 6 GeV/u Pb ion beam test are reported to understand the performance limitations of the beam instrumentation systems needed to characterise the beam in CHARM.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST012  
About • Received ※ 02 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 23 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOTK058 CERN’s East Experimental Area: A New Modern Physics Facility 2911
 
  • S. Evrard, D. Banerjee, J. Bernhard, F. Carvalho, S. Danzeca, M. Lazzaroni, B. Rae, G. Romagnoli
    CERN, Meyrin, Switzerland
 
  CERN’s East Area has hosted a variety of fixed-target experiments since the 1950s, using four beamlines from the Proton Synchrotron (PS). Over the past 4 years, the experimental area - CERN’s second largest - has undergone a complete makeover. New instrumentation and beamline configuration have improved the precision of data collection, and new magnets and power convertors have drastically reduced the area’s energy consumption. This article will summarize the major challenges encountered for the design of the renovated beamlines and for the preparation and test of the components. The infrastructure was carefully fitted resulting in a very smooth beam commissioning, the details of which will also be presented along with the restart of physics in the second half of 2021. With the return of the beams in the accelerator complex, the East Area’s experiments have taken physics measurements again and the facility’s central role in the modern physics landscape has been restored.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK058  
About • Received ※ 08 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 05 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FROXSP1 20-Year Collaboration on Synchrotron RF Between CERN and J-PARC 3130
 
  • C. Ohmori
    J-PARC, KEK & JAEA, Ibaraki-ken, Japan
  • M. Brucoli, M. Brugger, H. Damerau, S. Danzeca, M.M. Paoluzzi, C. Rossi
    CERN, Meyrin, Switzerland
  • K. Hasegawa, Y. Morita, Y. Sugiyama, M. Yoshii
    KEK, Tokai, Ibaraki, Japan
  • H. Okita, M.J. Shirakata, F. Tamura
    JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
 
  KEK/J-PARC and CERN started the collaboration on the RF systems of Low Energy Ion Ring to use magnetic alloy loaded cavities in 2002 for heavy ion collision program at LHC. It was an exchange of our expertise on the wideband cavities and high-power solid-state amplifiers. This paper summarizes the 20-year collaboration which includes many synchrotrons of both facilities: J-PARC Rapid Cycling Synchrotron and Main Ring, CERN Proton Synchrotron, PS Booster, Antiproton Decelerator, Extra Low Energy Antiproton ring and MedAustron. By the improvements of cavity core using the magnetic annealing, field gradient of cavity and compactness were improved to fit the requirements for LHC Injector Upgrade (LIU)program. Radiation-hard and compact high-power solid-state amplifiers were also developed for LIU and future accelerator improvements.  
slides icon Slides FROXSP1 [8.210 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-FROXSP1  
About • Received ※ 07 June 2022 — Revised ※ 17 June 2022 — Accepted ※ 19 June 2022 — Issue date ※ 25 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)