MC8: Applications of Accelerators, Technology Transfer, Industrial Relations and Outreach
U06 Technology Transfer and Lab-Industry Relations

Paper	Title	Page
WEPAB255	Simulation Studies on the Interactions of Electron Beam with Wastewater	3236
	X. Li, H. Baumgart, G. Ciovati ODU, Norfolk, Virginia, USA G. Ciovati, F.E. Hannon, S. Wang JLab, Newport News, Virginia, USA
	Funding: Jefferson Lab LDRD The manufactured chemical pollutants, like 1,4 dioxane and PFAS (per- and polyfluroralkyl substances), found in the underground water and/or drinking water are challenging to be removed or biodegraded. Energetic electrons are capable of mediating and removing them. This paper utilizes FLUKA code to evaluate the beam-wastewater interaction effects with different energy, space and divergence distributions of the electron beam. With 8 MeV average energy, the electron beam exits from a 0.0127 cm thick titanium window, travels through a 4.3 cm distance air and a second 0.0127 cm thick stainless water container window with 2.43 cm radius, and finally is injected into the water area, where the volume of water is around 75 cubic cm. The distribution parameters of the electron beam are from the GPT (General Particle Tracer) simulations for UITF (Upgraded Injector Test Facility) in Jefferson lab. By varying the distributions, several measurements including the dose (or energy deposition) distribution, electron fluence, photon fluence are scored and compared. Taking the comparisons into consideration, this paper is aiming to find better electron beams for the wastewater irradiation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB255
About •	paper received ※ 20 May 2021       paper accepted ※ 25 June 2021       issue date ※ 14 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)
WEPAB416	Industrialization Study of the Accelerating Structures for a 380 GeV Compact Linear Collider	3674
	A. Magazinik Tampere University, Tampere, Finland N. Catalán Lasheras CERN, Meyrin, Switzerland S. Mäkinen Tampere University of Technology, Tampere, Finland J. Sauza-Bedolla Lancaster University, Lancaster, United Kingdom
	The LHC at CERN will continue its operation for approximately 20 years. In parallel, diverse studies are conducted for the design of a future large-scale accelerator. One of the options is the Compact Linear Collider (CLIC) who aims to provide a very high accelerating gradient (100 MV/m) achieved by using normal conducting radiofrequency (RF) cavities operating in the X-band range (12 GHz). Each accelerating structure is a challenging component involving ultra-precise machining and diffusion bonding techniques. The first stage of CLIC operates at a collision energy of 380 GeV with an accelerator length of 11 km, consisting of 21630 accelerating structures. Even though the prototypes have shown a mature and ready to build concept, the present number of qualified suppliers is limited. Therefore, an industrialization study was done through a technical survey with hi-tech companies. The aim is to evaluate current capabilities, to ensure the necessary manufacturing yield, schedule, and cost for mass production. This paper presents the results of the industrialization study for 12 GHz accelerating structures for CLIC 380 GeV, highlighting the principal challenges towards mass production.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB416
About •	paper received ※ 19 May 2021       paper accepted ※ 22 June 2021       issue date ※ 14 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)
THPAB372	SABINA: A Research Infrastructure at LNF	4505
	L. Sabbatini, D. Alesini, M.P. Anania, M. Bellaveglia, A. Biagioni, B. Buonomo, S. Cantarella, F. Cardelli, E. Chiadroni, G. Costa, G. Di Pirro, F. Dipace, A. Esposito, M. Ferrario, M. Galletti, A. Gallo, A. Ghigo, L. Giannessi, A. Giribono, S. Incremona, L. Pellegrino, L. Piersanti, R. Pompili, R. Ricci, J. Scifo, A. Stecchi, A. Stella, C. Vaccarezza, A. Vannozzi, S. Vescovi, F. Villa INFN/LNF, Frascati (Roma), Italy A. Cianchi Università di Roma II Tor Vergata, Roma, Italy A. Cianchi INFN-Roma II, Roma, Italy A. Doria, A. Petralia ENEA C.R. Frascati, Frascati (Roma), Italy L. Giannessi Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy S. Lupi Sapienza University of Rome, Roma, Italy S. Macis La Sapienza University of Rome, Rome, Italy V. Petrillo Universita’ degli Studi di Milano, Milano, Italy V. Petrillo INFN-Milano, Milano, Italy
	Funding: SABINA is a project co-funded by Regione Lazio within POR-FESR 2014-2020 program. SABINA (Source of Advanced Beam Imaging for Novel Applications) is a project aimed at the enhancement of the SPARC_LAB research facility. This enhancement is carried out through the following actions: first, the increase of the uptime through the consolidation of technological systems and the replacement of some critical equipment in order to limit the number and extent of faults; then, the improvement of the accelerator performances, by replacing some devices with updated ones. The effect will be greater reliability of the accelerator, which will allow it to be opened as a facility for external users, both industrial and scientific, with the goal of increasing the competitiveness of industries in a broad range of technological areas and enhancing collaborations with research institutions. The two user lines that will be implemented are a power laser target area and a THz radiation line, by using a dedicated undulator. The undulator and the THz line are also described in other contributions to this conference. A brief description of the project and potential exploitations are reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB372
About •	paper received ※ 24 May 2021       paper accepted ※ 01 July 2021       issue date ※ 20 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)