Author: Zhang, X.Y.
Paper Title Page
MOPAB380 Status and Progress of the RF System for High Energy Photon Source 1165
 
  • P. Zhang, J. Dai, Z.W. Deng, L. Guo, T.M. Huang, D.B. Li, J. Li, Z.Q. Li, H.Y. Lin, Y.L. Luo, Q. Ma, F. Meng, Z.H. Mi, Q.Y. Wang, X.Y. Zhang, F.C. Zhao, H.J. Zheng
    IHEP, Beijing, People’s Republic of China
 
  Funding: This work was supported in part by High Energy Photon Source, a major national science and technology infrastructure in China and in part by the Chinese Academy of Sciences.
High Energy Photon Source (HEPS) is a 6 GeV diffraction-limited synchrotron light source currently under construction in Beijing. It adopts a double-frequency RF system with 166.6 MHz as fundamental and 499.8 MHz as third harmonic. The fundamental cavity is making use of a superconducting quarter-wave β=1 structure and the third harmonic is of superconducting elliptical single-cell geometry for the storage ring, while normal-conducting 5-cell cavities are chosen for the booster ring. A total of 900 kW RF power shall be delivered to the beam by the 166.6 MHz cavities and the third harmonic cavities are active. All cavities are driven by solid-state power amplifiers and the RF fields are regulated by digital low-level RF control systems. The cavity and ancillaries, high-power RF system and low-level RF control system are in the prototyping phase. This paper presents the current status and progress of the RF system for HEPS.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB380  
About • paper received ※ 09 May 2021       paper accepted ※ 09 June 2021       issue date ※ 24 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB382 Synchrotron Light Shielding for the 166 MHz Superconducting RF Section at High Energy Photon Source 1169
 
  • X.Y. Zhang, Z.Q. Li, Q. Ma, P. Zhang
    IHEP, Beijing, People’s Republic of China
 
  Funding: This work was supported by High Energy Photon Source, a major national science and technology infrastructure in China.
The High Energy Photo Source (HEPS) project has been under construction since 2019, and will be first diffraction-limited synchrotron light source in China. A 6 GeV electron beam with 200 mA current will be stored in the main ring. If synchrotron light produced from this energetic electron beam hits the superconducting cavity’s surface, it would cause thermal breakdown of the superconductivity. In the current lattice design, these lights cannot be fully blocked by the collimator in the upstream lattice cell, therefore a shielding scheme inside the rf section is required. This however brings great challenges to the already limited space. The design of the collimator has been focused on fulfilling shielding requirements while optimizing beam impedance, synchrotron light power density, thermal and mechanical stabilities. Shielding materials are subsequently chosen with dedicated cooling to ensure long-term stable operations. In this paper, a shielding scheme inside the rf section of the HEPS storage ring is presented. The synchrotron light mainly from the upstream bending magnet is successfully block. The sensitivity to beam position movement and installation error is also analyzed.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB382  
About • paper received ※ 17 May 2021       paper accepted ※ 11 June 2021       issue date ※ 23 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB340 Design of the Magnetic Shielding for 166 MHz and 500 MHz Superconducting RF Cavities at High Energy Photon Source 2289
 
  • L. Guo, Y. Chen, J. Li, Z.Q. Li, Q. Ma, P. Zhang, X.Y. Zhang, H.J. Zheng
    IHEP, Beijing, People’s Republic of China
 
  Funding: This work was supported by High Energy Photon Source, a major national science and technology infrastructure in China.
Five 166 MHz quarter-wave β=1 superconducting cavities and two 500 MHz single-cell elliptical superconducting cavities have been designed for the storage ring of High Energy Photon Source (HEPS). It is necessary to shield magnetic field for superconducting cavities to reduce the residual surface resistance due to magnetic flux trapping during cavity cool down. The magnetic shielding for both 166 MHz and 500 MHz superconducting cavities have been designed. The residual magnetic field inside the cavities have been calculated by using Opera-3D simulation software. The geographic location of the cavity being installed at the HEPS site and the fringe field of the upstream magnet are considered. These are reported in this paper.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB340  
About • paper received ※ 18 May 2021       paper accepted ※ 17 June 2021       issue date ※ 10 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAB090 Higher Order Mode Damping for 166 MHz and 500 MHz Superconducting RF Cavities at High Energy Photon Source 2798
 
  • H.J. Zheng, Z.Q. Li, F. Meng, N. Wang, H.S. Xu, P. Zhang, X.Y. Zhang
    IHEP, Beijing, People’s Republic of China
 
  Funding: This work was supported in part by High Energy Photon Source, in part by the National Natural Science Foundation of China under Grant No. 11905232.
Superconducting rf cavities have been chosen for High Energy Photon Source, a 6 GeV diffraction-limited synchrotron light source under construction in Beijing. The main accelerating cavity adopted a quarter-wave β=1 structure operating at 166 MHz while the third harmonic cavity utilized the single-cell elliptical geometry at 500 MHz for the storage ring. The high beam current (200 mA) requires a strong damping of higher order modes (HOMs) excited in the superconducting cavities. To meet the beam stability requirements, enlarged beam pipes with a diameter of 505 mm for the 166 MHz cavity and 300 mm for the 500 MHz cavity were chosen to allow all HOMs to propagate along the beam tubes and to be damped by beam-line absorbers. This paper presents the HOM damping scheme and the cavity impedance analysis results. In addition, power losses due to HOMs were also evaluated for various operation modes (high charge and high luminosity) of the HEPS.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB090  
About • paper received ※ 17 May 2021       paper accepted ※ 22 June 2021       issue date ※ 20 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)