IPAC2021 - List of Authors (Trabocchi, S.M.)

Paper	Title	Page
MOPAB350	RF Buncher Cavity for Polarized He-3 Beam at BNL	1090
	T. Kanesue, S.M. Trabocchi BNL, Upton, New York, USA A. Murata TIT, Tokyo, Japan
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. A 100.625 MHz quarter wave resonator type rf buncher cavity was fabricated for polarized He-3 spin rotator beam line at BNL. This cavity will be installed in the existing EBIS-To-Booster beam line to provide effective voltage of more than 40 kV for 2 MeV/u 3He²⁺ beam. This cavity has a large drift tube inner diameter of 80 mm and small gap length of 5 mm. The buncher consists of 3 sections, which are a cavity main body including drift tube, stem, and inner wall, a lid with a power coupler, and a lid with an inductive tuner. The main body was machined from a bulk copper only by CNC machining. The result of low power test agreed well with rf simulation without any alignment. The difference between measured and calculated resonant frequency was <0.1 %, and measured Q value was 92 % of that in simulation. The cavity rf design and test results will be shown.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB350
About •	paper received ※ 26 May 2021 paper accepted ※ 28 May 2021 issue date ※ 12 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

RF Buncher Cavity for Polarized He-3 Beam at BNL

1090

T. Kanesue, S.M. Trabocchi
BNL, Upton, New York, USA
A. Murata
TIT, Tokyo, Japan

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
A 100.625 MHz quarter wave resonator type rf buncher cavity was fabricated for polarized He-3 spin rotator beam line at BNL. This cavity will be installed in the existing EBIS-To-Booster beam line to provide effective voltage of more than 40 kV for 2 MeV/u 3He²⁺ beam. This cavity has a large drift tube inner diameter of 80 mm and small gap length of 5 mm. The buncher consists of 3 sections, which are a cavity main body including drift tube, stem, and inner wall, a lid with a power coupler, and a lid with an inductive tuner. The main body was machined from a bulk copper only by CNC machining. The result of low power test agreed well with rf simulation without any alignment. The difference between measured and calculated resonant frequency was <0.1 %, and measured Q value was 92 % of that in simulation. The cavity rf design and test results will be shown.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB350

About •

paper received ※ 26 May 2021 paper accepted ※ 28 May 2021 issue date ※ 12 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)