IPAC2021 - List of Authors (Thompson, N.)

Paper	Title	Page
TUPAB074	S-Band Transverse Deflecting Structure Design for CompactLight	1540
	X.W. Wu, W. Wuensch CERN, Meyrin, Switzerland S. Di Mitri Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy N. Thompson Cockcroft Institute, Warrington, Cheshire, United Kingdom
	The CompactLight project is currently developing the design of a next generation hard X-ray FEL facility, which is based on high-gradient X-band (12 GHz) structures. However, to carry out pump-and-probe experiments in the project, two-bunch operation with a spacing of 10 X-band rf cycles is proposed. A sub-harmonic transverse deflecting structure working at S-band is proposed to direct the two bunches into two separate FEL lines. The two FEL pulses will have independently tunable wavelengths and can be combined in a single experiment with a temporal delay between pulses of ± 100 fs. The rf design of the transverse deflector is presented in this paper.
	Poster TUPAB074 [1.557 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB074
About •	paper received ※ 19 May 2021 paper accepted ※ 10 June 2021 issue date ※ 21 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB114	FEL Performance and Beam Quality Assessment of Undulator Line for the CompactLight Facility.	1655
	H.M. Castañeda Cortés, D.J. Dunning, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: H2020 CompactLight has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 777431 The H₂020 CompactLight Project aims for the design of innovative, cost-effective, compact FEL facilities to generate higher peak brilliance radiation in the soft and hard X-ray. In this paper we assess via simulation studies the performance of a variably polarising APPLE-X afterburner positioned downstream of a helical Super Conducting Undulator (SCU). We discuss the optimum balance between the active SCU length and the afterburner length, considering the peak brilliance and pulse energy of the output. Our studies are complemented with analysis of the optical beam quality of the afterburner output to determine the design constraints of the photon beamline that delivers the FEL output to the experimental areas. * Mak, A., Salen, P., Goryashko, V., Clarke, J., http://uu.diva-portal.org/smash/record.jsf?pid=diva2\%3A1280300&dswid=3236 ** Lutman, A. et al. Nature Photonics 10, 468
	Poster TUPAB114 [1.210 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB114
About •	paper received ※ 11 May 2021 paper accepted ※ 10 June 2021 issue date ※ 27 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

S-Band Transverse Deflecting Structure Design for CompactLight

1540

X.W. Wu, W. Wuensch
CERN, Meyrin, Switzerland
S. Di Mitri
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
N. Thompson
Cockcroft Institute, Warrington, Cheshire, United Kingdom

The CompactLight project is currently developing the design of a next generation hard X-ray FEL facility, which is based on high-gradient X-band (12 GHz) structures. However, to carry out pump-and-probe experiments in the project, two-bunch operation with a spacing of 10 X-band rf cycles is proposed. A sub-harmonic transverse deflecting structure working at S-band is proposed to direct the two bunches into two separate FEL lines. The two FEL pulses will have independently tunable wavelengths and can be combined in a single experiment with a temporal delay between pulses of ± 100 fs. The rf design of the transverse deflector is presented in this paper.

Poster TUPAB074 [1.557 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB074

About •

paper received ※ 19 May 2021 paper accepted ※ 10 June 2021 issue date ※ 21 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB114

FEL Performance and Beam Quality Assessment of Undulator Line for the CompactLight Facility.

1655

H.M. Castañeda Cortés, D.J. Dunning, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

Funding: H2020 CompactLight has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 777431
The H₂020 CompactLight Project aims for the design of innovative, cost-effective, compact FEL facilities to generate higher peak brilliance radiation in the soft and hard X-ray. In this paper we assess via simulation studies the performance of a variably polarising APPLE-X afterburner positioned downstream of a helical Super Conducting Undulator (SCU). We discuss the optimum balance between the active SCU length and the afterburner length, considering the peak brilliance and pulse energy of the output. Our studies are complemented with analysis of the optical beam quality of the afterburner output to determine the design constraints of the photon beamline that delivers the FEL output to the experimental areas.
* Mak, A., Salen, P., Goryashko, V., Clarke, J., http://uu.diva-portal.org/smash/record.jsf?pid=diva2\%3A1280300&dswid=3236
** Lutman, A. et al. Nature Photonics 10, 468

Poster TUPAB114 [1.210 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB114

About •

paper received ※ 11 May 2021 paper accepted ※ 10 June 2021 issue date ※ 27 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)