IPAC2021 - List of Authors (Sorrell, Z.)

Paper	Title	Page
WEPAB299	Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development	3363
	M.T. Crofford, J.A. Ball, J.E. Breeding, M.P. Martinez, J.S. Moss, M. Musrock ORNL, Oak Ridge, Tennessee, USA L.R. Doolittle, C. Serrano, V.K. Vytla LBNL, Berkeley, California, USA J. Graham, C.K. Roberts, J.W. Sinclair, Z. Sorrell, S. Whaley ORNL RAD, Oak Ridge, Tennessee, USA
	Funding: * This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract number DE-AC05-00OR22725. The Proton Power Upgrade (PPU) Project is approved for the Spallation Neutron Source at Oak Ridge National Laboratory and will double the proton beam power capability from 1.4 MW to 2.8 MW with 2 MW beam power available to the first target station. A second target station is planned and will utilize the remaining beam power in the future. The proton power increase will be supported with the addition of twenty-eight new superconducting cavities powered by 700 kW peak power klystrons to increase beam energy while increases to the beam current will be done with a combination of existing RF margin, and DTL HPRF upgrades. The original low-level RF control system has proven to be reliable over the past 15 years of operations, but obsolescence issues mandate a replacement system be developed for the PPU project. The replacement system is realized in a µTCA.4 platform using a combination of commercial off-the-shelf boards and custom hardware to support the requirements of PPU. This paper presents the prototype hardware, firmware, and software development activities along with preliminary testing results of the new system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB299
About •	paper received ※ 18 May 2021 paper accepted ※ 21 June 2021 issue date ※ 11 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development

3363

M.T. Crofford, J.A. Ball, J.E. Breeding, M.P. Martinez, J.S. Moss, M. Musrock
ORNL, Oak Ridge, Tennessee, USA
L.R. Doolittle, C. Serrano, V.K. Vytla
LBNL, Berkeley, California, USA
J. Graham, C.K. Roberts, J.W. Sinclair, Z. Sorrell, S. Whaley
ORNL RAD, Oak Ridge, Tennessee, USA

Funding: * This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract number DE-AC05-00OR22725.
The Proton Power Upgrade (PPU) Project is approved for the Spallation Neutron Source at Oak Ridge National Laboratory and will double the proton beam power capability from 1.4 MW to 2.8 MW with 2 MW beam power available to the first target station. A second target station is planned and will utilize the remaining beam power in the future. The proton power increase will be supported with the addition of twenty-eight new superconducting cavities powered by 700 kW peak power klystrons to increase beam energy while increases to the beam current will be done with a combination of existing RF margin, and DTL HPRF upgrades. The original low-level RF control system has proven to be reliable over the past 15 years of operations, but obsolescence issues mandate a replacement system be developed for the PPU project. The replacement system is realized in a µTCA.4 platform using a combination of commercial off-the-shelf boards and custom hardware to support the requirements of PPU. This paper presents the prototype hardware, firmware, and software development activities along with preliminary testing results of the new system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB299

About •

paper received ※ 18 May 2021 paper accepted ※ 21 June 2021 issue date ※ 11 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)