IPAC2021 - List of Authors (Ramjiawan, R.L.)

Paper	Title	Page
MOPAB241	Design of the Proton and Electron Transfer Lines for AWAKE Run 2c	778
	R.L. Ramjiawan JAI, Oxford, United Kingdom S. Döbert, E. Gschwendtner, P. Muggli, F.M. Velotti, L. Verra CERN, Meyrin, Switzerland J.P. Farmer MPI-P, München, Germany P. Muggli MPI, Muenchen, Germany
	The AWAKE Run 1 experiment achieved electron acceleration to 2 GeV using plasma wakefield acceleration driven by 400 GeV, self-modulated proton bunches from the CERN SPS. The Run 2c phase of the experiment aims to build on these results by demonstrating acceleration to ~10 GeV while preserving the quality of the accelerated electron beam. To realize this, there will be an additional plasma cell, to separate the proton bunch self-modulation and the electron acceleration. A new 150 MeV beamline is required to transport and focus the witness electron beam to a beam size of several microns at the injection point. This specification is designed to preserve the beam emittance during acceleration, also requiring micron-level stability between the driver and witness beams. To facilitate these changes, the Run 1 proton transfer line will be reconfigured to shift the first plasma cell 40 m downstream. The Run 1 electron beamline will be adapted and used to inject electron bunches into the first plasma cell to seed the proton bunch self-modulation. Proposed adjustments to the proton transfer line and studies for the designs of the two electron transfer lines are detailed in this contribution.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB241
About •	paper received ※ 18 May 2021 paper accepted ※ 02 June 2021 issue date ※ 17 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB019	A High-Resolution, Low-Latency, Bunch-by-Bunch Feedback System for Nano-Beam Stabilization	1378
	R.L. Ramjiawan, D.R. Bett, N. Blaskovic Kraljevic, T. Bromwich, P. Burrows, G.B. Christian, C. Perry JAI, Oxford, United Kingdom D.R. Bett CERN, Geneva, Switzerland N. Blaskovic Kraljevic ESS, Lund, Sweden G.B. Christian DLS, Oxfordshire, United Kingdom
	A low-latency, bunch-by-bunch feedback system employing high-resolution cavity Beam Position Monitors (BPMs) has been developed and tested at the Accelerator Test Facility (ATF2) at the High Energy Accelerator Research Organization (KEK), Japan. The feedback system was designed to demonstrate nanometer-level vertical stabilization at the focal point of the ATF2 and can be operated using either a single BPM to provide local beam stabilization, or by using two BPMs to stabilize the beam at an intermediate location. The feedback correction is implemented using a stripline kicker and the feedback calculations are performed on a digital board constructed around a Field Programmable Gate Array (FPGA). The feedback performance was tested with trains of two bunches, separated by 280ns, at a charge of ~1nC, where the vertical offset of the first bunch was measured and used to calculate the correction to be applied to the second bunch. The BPMs have been demonstrated to achieve an operational resolution of ~20nm. With the application of single-BPM and two-BPM feedback, beam stabilization of below 50nm and 41nm respectively has been achieved with a latency of 232ns.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB019
About •	paper received ※ 18 May 2021 paper accepted ※ 09 June 2021 issue date ※ 14 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB020	A Sub-Micron Resolution, Bunch-by-Bunch Beam Trajectory Feedback System and Its Application to Reducing Wakefield Effects in Single-Pass Beamlines	1382
	D.R. Bett, P. Burrows, C. Perry, R.L. Ramjiawan JAI, Oxford, United Kingdom D.R. Bett CERN, Geneva, Switzerland K. Kubo, T. Okugi, N. Terunuma KEK, Ibaraki, Japan
	A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested at the KEK Accelerator Test Facility, ATF2. The system uses the vertical position of the bunch measured at two beam position monitors to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. Using trains of two electron bunches separated in time by 187.6ns, the system was optimised so as to stabilize the beam offset at the feedback BPMs to better than 350nm, yielding a local trajectory angle correction to within 250nrad. The quality of the correction was verified using three downstream witness BPMs and the results were found to be in agreement with the predictions of a linear lattice model used to propagate the beam trajectory from the feedback region. This same model predicts a corrected be am jitter of c.1nm at the focal point of the accelerator. Measurements with a beam size monitor at this location demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the increase in the measured beam size as a function of beam charge by a factor of ~1.6.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB020
About •	paper received ※ 13 May 2021 paper accepted ※ 01 July 2021 issue date ※ 11 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of the Proton and Electron Transfer Lines for AWAKE Run 2c

778

R.L. Ramjiawan
JAI, Oxford, United Kingdom
S. Döbert, E. Gschwendtner, P. Muggli, F.M. Velotti, L. Verra
CERN, Meyrin, Switzerland
J.P. Farmer
MPI-P, München, Germany
P. Muggli
MPI, Muenchen, Germany

The AWAKE Run 1 experiment achieved electron acceleration to 2 GeV using plasma wakefield acceleration driven by 400 GeV, self-modulated proton bunches from the CERN SPS. The Run 2c phase of the experiment aims to build on these results by demonstrating acceleration to ~10 GeV while preserving the quality of the accelerated electron beam. To realize this, there will be an additional plasma cell, to separate the proton bunch self-modulation and the electron acceleration. A new 150 MeV beamline is required to transport and focus the witness electron beam to a beam size of several microns at the injection point. This specification is designed to preserve the beam emittance during acceleration, also requiring micron-level stability between the driver and witness beams. To facilitate these changes, the Run 1 proton transfer line will be reconfigured to shift the first plasma cell 40 m downstream. The Run 1 electron beamline will be adapted and used to inject electron bunches into the first plasma cell to seed the proton bunch self-modulation. Proposed adjustments to the proton transfer line and studies for the designs of the two electron transfer lines are detailed in this contribution.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB241

About •

paper received ※ 18 May 2021 paper accepted ※ 02 June 2021 issue date ※ 17 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB019

A High-Resolution, Low-Latency, Bunch-by-Bunch Feedback System for Nano-Beam Stabilization

1378

R.L. Ramjiawan, D.R. Bett, N. Blaskovic Kraljevic, T. Bromwich, P. Burrows, G.B. Christian, C. Perry
JAI, Oxford, United Kingdom
D.R. Bett
CERN, Geneva, Switzerland
N. Blaskovic Kraljevic
ESS, Lund, Sweden
G.B. Christian
DLS, Oxfordshire, United Kingdom

A low-latency, bunch-by-bunch feedback system employing high-resolution cavity Beam Position Monitors (BPMs) has been developed and tested at the Accelerator Test Facility (ATF2) at the High Energy Accelerator Research Organization (KEK), Japan. The feedback system was designed to demonstrate nanometer-level vertical stabilization at the focal point of the ATF2 and can be operated using either a single BPM to provide local beam stabilization, or by using two BPMs to stabilize the beam at an intermediate location. The feedback correction is implemented using a stripline kicker and the feedback calculations are performed on a digital board constructed around a Field Programmable Gate Array (FPGA). The feedback performance was tested with trains of two bunches, separated by 280ns, at a charge of ~1nC, where the vertical offset of the first bunch was measured and used to calculate the correction to be applied to the second bunch. The BPMs have been demonstrated to achieve an operational resolution of ~20nm. With the application of single-BPM and two-BPM feedback, beam stabilization of below 50nm and 41nm respectively has been achieved with a latency of 232ns.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB019

About •

paper received ※ 18 May 2021 paper accepted ※ 09 June 2021 issue date ※ 14 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB020

A Sub-Micron Resolution, Bunch-by-Bunch Beam Trajectory Feedback System and Its Application to Reducing Wakefield Effects in Single-Pass Beamlines

1382

D.R. Bett, P. Burrows, C. Perry, R.L. Ramjiawan
JAI, Oxford, United Kingdom
D.R. Bett
CERN, Geneva, Switzerland
K. Kubo, T. Okugi, N. Terunuma
KEK, Ibaraki, Japan

A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested at the KEK Accelerator Test Facility, ATF2. The system uses the vertical position of the bunch measured at two beam position monitors to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. Using trains of two electron bunches separated in time by 187.6ns, the system was optimised so as to stabilize the beam offset at the feedback BPMs to better than 350nm, yielding a local trajectory angle correction to within 250nrad. The quality of the correction was verified using three downstream witness BPMs and the results were found to be in agreement with the predictions of a linear lattice model used to propagate the beam trajectory from the feedback region. This same model predicts a corrected be am jitter of c.1nm at the focal point of the accelerator. Measurements with a beam size monitor at this location demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the increase in the measured beam size as a function of beam charge by a factor of ~1.6.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB020

About •

paper received ※ 13 May 2021 paper accepted ※ 01 July 2021 issue date ※ 11 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)