IPAC2021 - List of Authors (Paparella, R.)

Paper	Title	Page
MOPAB394	Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity	1204
	A. D’Ambros, M. Bertucci, A. Bosotti, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy F. Cozzi, G. Pianello Politecnico di Milano, Milano, Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	Standard vertical Buffered Chemical Polishing (BCP) is one of the main surface treatment for Superconducting Radiofrequency (SRF) cavities. A finite element Computational Fluid Dynamic (CFD) model has been developed. Uncertainties in the solution of fluid simulations are not negligible due to the complex geometry of a SRF cavity; thus without an experimental validation, results from this type of simulations cannot be confidently used to improve the process. To this aim, an experimental study was started to investigate the fluid dynamics of the BCP process by means of Particle Image Velocimetry (PIV) technique. Similitude on Reynolds number and Refractive Index Matching (RIM) technique were also implemented to replace the dangerous BCP mixture with a glycerine-water mixture. The paper describes the preliminary results from simulations and experiment.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB394
About •	paper received ※ 19 May 2021 paper accepted ※ 24 June 2021 issue date ※ 13 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB035	ESS Medium Beta Cavities Status at INFN LASA	1420
	D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	INFN Milano contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. The production has reached completion, being all the cavities mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold. In this paper, we report on the results and lessons learnt and the actions taken both for quality control managing and recovery of the few cavities that did not reach the project goal after the first qualification test.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB035
About •	paper received ※ 19 May 2021 paper accepted ※ 14 June 2021 issue date ※ 18 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB333	Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification	2279
	G.V. Eremeev, D.J. Bice, C. Boffo, S.K. Chandrasekaran, S. Cheban, F. Furuta, I.V. Gonin, C.J. Grimm, S. Kazakov, T.N. Khabiboulline, A. Lunin, M. Martinello, N. Nigam, J.P. Ozelis, Y.M. Pischalnikov, K.S. Premo, O.V. Prokofiev, O.V. Pronitchev, G.V. Romanov, N. Solyak, A.I. Sukhanov, G. Wu Fermilab, Batavia, Illinois, USA M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava RRCAT, Indore (M.P.), India P. Bhattacharyya, S. Ghosh, S. Seth VECC, Kolkata, India R. Kumar BARC, Mumbai, India J. Lewis, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom C. Pagani, R. Paparella INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy T. Reid ANL, Lemont, Illinois, USA A.D. Shabalina STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. Low-beta and high-beta sections of PIP-II linac will use nine low-beta cryomodules with four cavities each and four high-beta cryomodules with six cavities each. These cavities will be produced and qualified in collaboration between Fermilab and the international partner labs. Prior to their installation into prototype cryomodules, several dressed cavities, which include jacketed cavities, high power couplers, and tuners, will be qualified in STC horizontal test bed at Fermilab. After qualification of bare β = 0.9 cavities at Fermilab, several pre-production β = 0.92 and β = 0.61 cavities have been and are being fabricated and qualified. Procurements have also been started for high power couplers and tuners. In this contribution we present the current status of prototype dressed cavity qualification for PIP-II.
	Poster TUPAB333 [6.247 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB333
About •	paper received ※ 23 May 2021 paper accepted ※ 19 July 2021 issue date ※ 19 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB348	INFN-LASA for the PIP-II LB650 Linac	4474
	R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	INFN joined the international effort for the PIP-II project at Fermilab and it’s going to contribute to the low-beta section of the PIP-II proton linac. In particular, INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, namely 36 plus spares 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry, qualified through vertical cold test, and delivered as ready for string installation. This paper reports the status of INFN’s contribution to PIP-II and of ongoing activities toward the experimental qualifications of infrastructures and prototypes.
	Poster THPAB348 [4.076 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB348
About •	paper received ※ 16 May 2021 paper accepted ※ 01 July 2021 issue date ※ 12 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB351	INFN-LASA Experimental Activities on PIP-II Low-Beta Cavity Prototypes	4481
	M. Bertucci, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy A. Gresele, A. Torri Ettore Zanon S.p.A., Nuclear Division, Schio, Italy M. Rizzi Ettore Zanon S.p.A., Schio, Italy
	This paper reports on the first results obtained by INFN-LASA on PIP-II low-beta cavity prototypes. The goal of this activity was to validate the reference surface treatment based on Electropolishing as a bulk removal step. The cavity treatment procedures are here presented together with the strategy used for their optimization. The experimental results of cavity cold tests for a single cell prototype are presented and discussed. Having this cavity achieved the requested performance, the baseline procedure is considered as validated and a plan for a future high-Q cavity surface treatment is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB351
About •	paper received ※ 19 May 2021 paper accepted ※ 23 July 2021 issue date ※ 29 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity

1204

A. D’Ambros, M. Bertucci, A. Bosotti, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
F. Cozzi, G. Pianello
Politecnico di Milano, Milano, Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

Standard vertical Buffered Chemical Polishing (BCP) is one of the main surface treatment for Superconducting Radiofrequency (SRF) cavities. A finite element Computational Fluid Dynamic (CFD) model has been developed. Uncertainties in the solution of fluid simulations are not negligible due to the complex geometry of a SRF cavity; thus without an experimental validation, results from this type of simulations cannot be confidently used to improve the process. To this aim, an experimental study was started to investigate the fluid dynamics of the BCP process by means of Particle Image Velocimetry (PIV) technique. Similitude on Reynolds number and Refractive Index Matching (RIM) technique were also implemented to replace the dangerous BCP mixture with a glycerine-water mixture. The paper describes the preliminary results from simulations and experiment.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB394

About •

paper received ※ 19 May 2021 paper accepted ※ 24 June 2021 issue date ※ 13 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB035

ESS Medium Beta Cavities Status at INFN LASA

1420

D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

INFN Milano contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. The production has reached completion, being all the cavities mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold. In this paper, we report on the results and lessons learnt and the actions taken both for quality control managing and recovery of the few cavities that did not reach the project goal after the first qualification test.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB035

About •

paper received ※ 19 May 2021 paper accepted ※ 14 June 2021 issue date ※ 18 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB333

Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification

2279

G.V. Eremeev, D.J. Bice, C. Boffo, S.K. Chandrasekaran, S. Cheban, F. Furuta, I.V. Gonin, C.J. Grimm, S. Kazakov, T.N. Khabiboulline, A. Lunin, M. Martinello, N. Nigam, J.P. Ozelis, Y.M. Pischalnikov, K.S. Premo, O.V. Prokofiev, O.V. Pronitchev, G.V. Romanov, N. Solyak, A.I. Sukhanov, G. Wu
Fermilab, Batavia, Illinois, USA
M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava
RRCAT, Indore (M.P.), India
P. Bhattacharyya, S. Ghosh, S. Seth
VECC, Kolkata, India
R. Kumar
BARC, Mumbai, India
J. Lewis, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
C. Pagani, R. Paparella
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
T. Reid
ANL, Lemont, Illinois, USA
A.D. Shabalina
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
Low-beta and high-beta sections of PIP-II linac will use nine low-beta cryomodules with four cavities each and four high-beta cryomodules with six cavities each. These cavities will be produced and qualified in collaboration between Fermilab and the international partner labs. Prior to their installation into prototype cryomodules, several dressed cavities, which include jacketed cavities, high power couplers, and tuners, will be qualified in STC horizontal test bed at Fermilab. After qualification of bare β = 0.9 cavities at Fermilab, several pre-production β = 0.92 and β = 0.61 cavities have been and are being fabricated and qualified. Procurements have also been started for high power couplers and tuners. In this contribution we present the current status of prototype dressed cavity qualification for PIP-II.

Poster TUPAB333 [6.247 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB333

About •

paper received ※ 23 May 2021 paper accepted ※ 19 July 2021 issue date ※ 19 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB348

INFN-LASA for the PIP-II LB650 Linac

4474

R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

INFN joined the international effort for the PIP-II project at Fermilab and it’s going to contribute to the low-beta section of the PIP-II proton linac. In particular, INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, namely 36 plus spares 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry, qualified through vertical cold test, and delivered as ready for string installation. This paper reports the status of INFN’s contribution to PIP-II and of ongoing activities toward the experimental qualifications of infrastructures and prototypes.

Poster THPAB348 [4.076 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB348

About •

paper received ※ 16 May 2021 paper accepted ※ 01 July 2021 issue date ※ 12 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB351

INFN-LASA Experimental Activities on PIP-II Low-Beta Cavity Prototypes

4481

M. Bertucci, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
A. Gresele, A. Torri
Ettore Zanon S.p.A., Nuclear Division, Schio, Italy
M. Rizzi
Ettore Zanon S.p.A., Schio, Italy

This paper reports on the first results obtained by INFN-LASA on PIP-II low-beta cavity prototypes. The goal of this activity was to validate the reference surface treatment based on Electropolishing as a bulk removal step. The cavity treatment procedures are here presented together with the strategy used for their optimization. The experimental results of cavity cold tests for a single cell prototype are presented and discussed. Having this cavity achieved the requested performance, the baseline procedure is considered as validated and a plan for a future high-Q cavity surface treatment is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB351

About •

paper received ※ 19 May 2021 paper accepted ※ 23 July 2021 issue date ※ 29 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)