IPAC2021 - List of Authors (Osipov, K.G.)

Paper	Title	Page
TUPAB252	Minimization of NICA Collider Impedance	2043
	S.A. Melnikov, I.N. Meshkov JINR, Dubna, Moscow Region, Russia K.G. Osipov JINR/VBLHEP, Dubna, Moscow region, Russia
	The paper presents the results of the longitudinal impedance minimization for the beam tube section in the arches of the NICA collider ring, consisting of a pumping pipe, a BPM station, and a bellows assembly, and considers the contribution of the impedance of this section to the ion beam stability in the NICA collider ring. To confirm the efficiency of the optimized design, a BPM prototype was fabricated, and a test bench was built for further laboratory measurements.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB252
About •	paper received ※ 13 May 2021 paper accepted ※ 14 June 2021 issue date ※ 10 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB299	Tuned Delay Unit for a Stochastic Cooling System at NICA Collider	2186
	S.V. Barabin, T. Kulevoy, D.A. Liakin, A.Y. Orlov ITEP, Moscow, Russia I.V. Gorelyshev, K.G. Osipov, V.V. Peshkov, A.O. Sidorin JINR/VBLHEP, Dubna, Moscow region, Russia
	Stochastic cooling is one of the crucial NICA (Nuclotron-based Ion Collider fAcility) subsystems. This system requires fine tuning of the response delay to the kicker, for both longitudinal and transverse stochastic cooling systems. The use of a digital delay line allows to add additional features such as a frequency dependent group velocity correction. To analyse the capabilities of the digital delay unit, a prototype of the device was created and tested. The article presents the characteristics of the prototype, its architecture and principle of operation, test results and estimations for the future developments.
	Poster TUPAB299 [0.493 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB299
About •	paper received ※ 17 May 2021 paper accepted ※ 10 June 2021 issue date ※ 16 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Minimization of NICA Collider Impedance

2043

S.A. Melnikov, I.N. Meshkov
JINR, Dubna, Moscow Region, Russia
K.G. Osipov
JINR/VBLHEP, Dubna, Moscow region, Russia

The paper presents the results of the longitudinal impedance minimization for the beam tube section in the arches of the NICA collider ring, consisting of a pumping pipe, a BPM station, and a bellows assembly, and considers the contribution of the impedance of this section to the ion beam stability in the NICA collider ring. To confirm the efficiency of the optimized design, a BPM prototype was fabricated, and a test bench was built for further laboratory measurements.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB252

About •

paper received ※ 13 May 2021 paper accepted ※ 14 June 2021 issue date ※ 10 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB299

Tuned Delay Unit for a Stochastic Cooling System at NICA Collider

2186

S.V. Barabin, T. Kulevoy, D.A. Liakin, A.Y. Orlov
ITEP, Moscow, Russia
I.V. Gorelyshev, K.G. Osipov, V.V. Peshkov, A.O. Sidorin
JINR/VBLHEP, Dubna, Moscow region, Russia

Stochastic cooling is one of the crucial NICA (Nuclotron-based Ion Collider fAcility) subsystems. This system requires fine tuning of the response delay to the kicker, for both longitudinal and transverse stochastic cooling systems. The use of a digital delay line allows to add additional features such as a frequency dependent group velocity correction. To analyse the capabilities of the digital delay unit, a prototype of the device was created and tested. The article presents the characteristics of the prototype, its architecture and principle of operation, test results and estimations for the future developments.

Poster TUPAB299 [0.493 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB299

About •

paper received ※ 17 May 2021 paper accepted ※ 10 June 2021 issue date ※ 16 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)