IPAC2021 - List of Authors (Michelato, P.)

Paper	Title	Page
MOPAB394	Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity	1204
	A. D’Ambros, M. Bertucci, A. Bosotti, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy F. Cozzi, G. Pianello Politecnico di Milano, Milano, Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	Standard vertical Buffered Chemical Polishing (BCP) is one of the main surface treatment for Superconducting Radiofrequency (SRF) cavities. A finite element Computational Fluid Dynamic (CFD) model has been developed. Uncertainties in the solution of fluid simulations are not negligible due to the complex geometry of a SRF cavity; thus without an experimental validation, results from this type of simulations cannot be confidently used to improve the process. To this aim, an experimental study was started to investigate the fluid dynamics of the BCP process by means of Particle Image Velocimetry (PIV) technique. Similitude on Reynolds number and Refractive Index Matching (RIM) technique were also implemented to replace the dangerous BCP mixture with a glycerine-water mixture. The paper describes the preliminary results from simulations and experiment.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB394
About •	paper received ※ 19 May 2021 paper accepted ※ 24 June 2021 issue date ※ 13 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB034	Development of Multi-Alkali Antimonides Photocathodes for High-Brightness RF Photoinjectors	1416
	S.K. Mohanty, M. Krasilnikov, A. Oppelt, H.J. Qian, F. Stephan DESY Zeuthen, Zeuthen, Germany G. Guerini Rocco, C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy W. Hillert University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy
	Multi-alkali antimonide-based photocathodes are suitable candidate for the electron sources of next-generation high brightness RF photoinjectors due to their excellent photoemissive properties especially, like low thermal emittances and high sensitivity to visible light. The former stands out, paving the way towards CW operations. Based on the previous successful development of Cesium Telluride photocathodes, we are now channelling our efforts toward an R&D activity focused on KCsSb and NaKSb(Cs) photocathodes. Parallel to that R&D activity, we have installed a new dedicated photocathode production system at the INFN-LASA to start the preparation of these photocathodes for their test in the PITZ photoinjector at DESY in Zeuthen. In this paper, detailed experimental results obtained from the KCsSb, along with a preliminary result from the NaKSb(Cs) photocathode material as well as the status of the overall project are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB034
About •	paper received ※ 19 May 2021 paper accepted ※ 21 June 2021 issue date ※ 31 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB035	ESS Medium Beta Cavities Status at INFN LASA	1420
	D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	INFN Milano contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. The production has reached completion, being all the cavities mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold. In this paper, we report on the results and lessons learnt and the actions taken both for quality control managing and recovery of the few cavities that did not reach the project goal after the first qualification test.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB035
About •	paper received ※ 19 May 2021 paper accepted ※ 14 June 2021 issue date ※ 18 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB348	INFN-LASA for the PIP-II LB650 Linac	4474
	R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	INFN joined the international effort for the PIP-II project at Fermilab and it’s going to contribute to the low-beta section of the PIP-II proton linac. In particular, INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, namely 36 plus spares 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry, qualified through vertical cold test, and delivered as ready for string installation. This paper reports the status of INFN’s contribution to PIP-II and of ongoing activities toward the experimental qualifications of infrastructures and prototypes.
	Poster THPAB348 [4.076 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB348
About •	paper received ※ 16 May 2021 paper accepted ※ 01 July 2021 issue date ※ 12 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB351	INFN-LASA Experimental Activities on PIP-II Low-Beta Cavity Prototypes	4481
	M. Bertucci, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy A. Gresele, A. Torri Ettore Zanon S.p.A., Nuclear Division, Schio, Italy M. Rizzi Ettore Zanon S.p.A., Schio, Italy
	This paper reports on the first results obtained by INFN-LASA on PIP-II low-beta cavity prototypes. The goal of this activity was to validate the reference surface treatment based on Electropolishing as a bulk removal step. The cavity treatment procedures are here presented together with the strategy used for their optimization. The experimental results of cavity cold tests for a single cell prototype are presented and discussed. Having this cavity achieved the requested performance, the baseline procedure is considered as validated and a plan for a future high-Q cavity surface treatment is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB351
About •	paper received ※ 19 May 2021 paper accepted ※ 23 July 2021 issue date ※ 29 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity

1204

A. D’Ambros, M. Bertucci, A. Bosotti, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
F. Cozzi, G. Pianello
Politecnico di Milano, Milano, Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

Standard vertical Buffered Chemical Polishing (BCP) is one of the main surface treatment for Superconducting Radiofrequency (SRF) cavities. A finite element Computational Fluid Dynamic (CFD) model has been developed. Uncertainties in the solution of fluid simulations are not negligible due to the complex geometry of a SRF cavity; thus without an experimental validation, results from this type of simulations cannot be confidently used to improve the process. To this aim, an experimental study was started to investigate the fluid dynamics of the BCP process by means of Particle Image Velocimetry (PIV) technique. Similitude on Reynolds number and Refractive Index Matching (RIM) technique were also implemented to replace the dangerous BCP mixture with a glycerine-water mixture. The paper describes the preliminary results from simulations and experiment.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB394

About •

paper received ※ 19 May 2021 paper accepted ※ 24 June 2021 issue date ※ 13 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB034

Development of Multi-Alkali Antimonides Photocathodes for High-Brightness RF Photoinjectors

1416

S.K. Mohanty, M. Krasilnikov, A. Oppelt, H.J. Qian, F. Stephan
DESY Zeuthen, Zeuthen, Germany
G. Guerini Rocco, C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
W. Hillert
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy

Multi-alkali antimonide-based photocathodes are suitable candidate for the electron sources of next-generation high brightness RF photoinjectors due to their excellent photoemissive properties especially, like low thermal emittances and high sensitivity to visible light. The former stands out, paving the way towards CW operations. Based on the previous successful development of Cesium Telluride photocathodes, we are now channelling our efforts toward an R&D activity focused on KCsSb and NaKSb(Cs) photocathodes. Parallel to that R&D activity, we have installed a new dedicated photocathode production system at the INFN-LASA to start the preparation of these photocathodes for their test in the PITZ photoinjector at DESY in Zeuthen. In this paper, detailed experimental results obtained from the KCsSb, along with a preliminary result from the NaKSb(Cs) photocathode material as well as the status of the overall project are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB034

About •

paper received ※ 19 May 2021 paper accepted ※ 21 June 2021 issue date ※ 31 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB035

ESS Medium Beta Cavities Status at INFN LASA

1420

D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, R. Paparella
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

INFN Milano contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. The production has reached completion, being all the cavities mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold. In this paper, we report on the results and lessons learnt and the actions taken both for quality control managing and recovery of the few cavities that did not reach the project goal after the first qualification test.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB035

About •

paper received ※ 19 May 2021 paper accepted ※ 14 June 2021 issue date ※ 18 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB348

INFN-LASA for the PIP-II LB650 Linac

4474

R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

INFN joined the international effort for the PIP-II project at Fermilab and it’s going to contribute to the low-beta section of the PIP-II proton linac. In particular, INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, namely 36 plus spares 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry, qualified through vertical cold test, and delivered as ready for string installation. This paper reports the status of INFN’s contribution to PIP-II and of ongoing activities toward the experimental qualifications of infrastructures and prototypes.

Poster THPAB348 [4.076 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB348

About •

paper received ※ 16 May 2021 paper accepted ※ 01 July 2021 issue date ※ 12 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB351

INFN-LASA Experimental Activities on PIP-II Low-Beta Cavity Prototypes

4481

M. Bertucci, A. Bosotti, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, C. Pagani, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
A. Gresele, A. Torri
Ettore Zanon S.p.A., Nuclear Division, Schio, Italy
M. Rizzi
Ettore Zanon S.p.A., Schio, Italy

This paper reports on the first results obtained by INFN-LASA on PIP-II low-beta cavity prototypes. The goal of this activity was to validate the reference surface treatment based on Electropolishing as a bulk removal step. The cavity treatment procedures are here presented together with the strategy used for their optimization. The experimental results of cavity cold tests for a single cell prototype are presented and discussed. Having this cavity achieved the requested performance, the baseline procedure is considered as validated and a plan for a future high-Q cavity surface treatment is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB351

About •

paper received ※ 19 May 2021 paper accepted ※ 23 July 2021 issue date ※ 29 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)