Paper |
Title |
Page |
MOPAB206 |
The RF Parameters of Heavy Ions Linac |
679 |
|
- A. Sitnikov, G. Kropachev, T. Kulevoy, D.N. Selesnev, A.I. Semennikov
ITEP, Moscow, Russia
- M.L. Smetanin, A.V. Telnov, N.V. Zavyalov
VNIIEF, Sarov, Russia
|
|
|
The new linac for A/Z = 8, output energy 4 MeV/u and 3 mA current is under development at NRC "Kurchatov Institute"-ITEP. The linac consists of Radio-Frequency Quadrupole (RFQ) with operating frequency 40 MHz and two sections of Drift Tube Linac (DTL) with operating frequency 80 and 160 MHz, correspondently. Both DTL has a modular structure and consists of separated individually phased resonators with focusing magnetic quadrupoles located between the cavities. The DTL1 is based on the quarter-wave resonators meanwhile DTL2 is based on IH 5-gap resonators. The 6D beam matching between RFQ and DTLs is provided by magnetic quadrupole lenses and 2-gaps RF-bunchers. The paper presents results of the radio-frequency (RF) design of linac accelerating structures.
|
|
|
Poster MOPAB206 [0.559 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB206
|
|
About • |
paper received ※ 14 May 2021 paper accepted ※ 01 July 2021 issue date ※ 29 August 2021 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPAB286 |
Quadrupole Focusing Lenses for Heavy Ion Linac |
4359 |
|
- V. Skachkov, A.V. Kozlov, G. Kropachev, T. Kulevoy, D.A. Liakin, O.S. Sergeeva, V.S. Skachkov, Yu. Stasevich
ITEP, Moscow, Russia
|
|
|
Simulation results of pulsed current electromagnet quadrupoles with integral of the magnetic field gradient up to 7 T are presented. Magnets for the DTL and MEBT focusing channels are designing for the heavy-ion linac in Institute for Theoretical and Experimental Physics (ITEP - NRC "Kurchatov Institute"). Appropriate conditions which promise getting the magnetic lens parameters required at restrictions on the overall length <130 mm as well as on the beam aperture >45 mm are defined. It is shown that the channel acceptance to beam emittance ratio desired not less than 3 can be provided by conventional low-carbon steel up to a magnetic aperture of 50 mm in diameter while beyond this size permendur is out of competition. Some aspects of the pulsed power supply system are considered and main parameters of the pulse current generator (PCG) are given.
|
|
|
Poster THPAB286 [0.701 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB286
|
|
About • |
paper received ※ 14 May 2021 paper accepted ※ 30 June 2021 issue date ※ 02 September 2021 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|