IPAC2021 - List of Authors (Joly, S.)

Paper	Title	Page
WEPAB224	Update of the Transverse Proton Synchrotron Impedance Model	3149
	S. Joly, N. Mounet, B. Salvant CERN, Geneva, Switzerland S. Joly La Sapienza University of Rome, Rome, Italy M. Migliorati INFN-Roma1, Rome, Italy M. Migliorati Sapienza University of Rome, Rome, Italy
	The CERN Proton Synchrotron (PS) was recently upgraded to allow reaching the ambitious performance goal of the High-Luminosity LHC Project. This upgrade is part of the LHC Injectors Upgrade project. The final part of the upgrade was performed during Long Shutdown 2 (LS2) to allow injection at higher energy from the PS Booster and a twofold increase in beam intensity and brightness. These changes must be considered in the PS impedance model. The effect on the impedance of the removal of obsolete injection equipment, changes of several accelerator components and new injection energy will be reviewed, as well as the wall impedance of the elliptic beam pipe, thanks to a newly developed code that allows taking into account both the ellipticity and the non-ultra-relativistic nature of the beam.
	Poster WEPAB224 [0.654 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB224
About •	paper received ※ 17 May 2021 paper accepted ※ 27 July 2021 issue date ※ 17 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB361	New Generation CERN LHC Injection Dump - Assembly and Installation (TDIS)	3548
	D. Carbajo Perez, E. Berthomé, C. Bertone, N. Biancacci, C. Bracco, G. Bregliozzi, B. Bulat, C. Cadiou, M. Calviani, G. Cattenoz, A. Cherif, P. Costa Pinto, A. Dallocchio, M. Di Castro, P. Fessia, M.I. Frankl, R. Franqueira Ximenes, J.-F. Fuchs, H. Garcia Gavela, J.-M. Geisser, L. Gentini, S.S. Gilardoni, M.A. Gonzalez De La Aleja Cabana, J.L. Grenard, J.M. Heredia, S. Joly, A. Lechner, J. Lendaro, J. Maestre, E. Page, M. Perez Ornedo, A. Perillo-Marcone, D. Pugnat, E. Rigutto, B. Salvant, A. Sapountzis, K. Scibor, R. Seidenbinder, J. Sola Merino, M. Taborelli, E. Urrutia, A. Vieille, C. Vollinger, C. Yin Vallgren CERN, Geneva, Switzerland
	Funding: Work supported by the Hilumi Project During CERN’s LS2, several upgrades were performed to beam intercepting devices in the framework of the HL-LHC Project. Upgraded equipment includes two internal beam dumps (TDIS) intended for machine protection located at the injection points from the SPS to the LHC. These two devices have been assembled, tested, and installed around LHC Point 2 and Point 8 and are currently ready to get commissioned with the beam. They are 5.8m-long, three-module-segmented vacuum chambers, with large aperture to accommodate the injected and circulating beam and equipped with absorbing materials, These comprise graphite and higher Z alloys that are embedded on sub-assemblies reinforced with back-stiffeners made of TZM. The current contribution covers three main matters. First, it details the TDIS design and its key technical features. The second topic discussed is the outcome of an experiment where a prototype module was tested under high-energy beam impacts at CERN’s HiRadMat facility. To conclude it is presented the return of experience from the pre-series construction, validation and installation in the LHC tunnel.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB361
About •	paper received ※ 18 May 2021 paper accepted ※ 11 June 2021 issue date ※ 17 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB235	Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators	4258
	A. Kurtulus, C. Accentura, N. Biancacci, F. Carra, F. Caspers, N. Chitnis, F. Giordano, R. Illan Fiastre, S. Joly, I. Lamas Garcia, L. Mourier, E. Métral, S. Redaelli, B. Salvant, W. Vollenberg, C. Vollinger, C. Zannini CERN, Geneva, Switzerland
	The High Luminosity Large Hadron Collider (HL-LHC) project will upgrade the LHC machine to allow operation with increased luminosity for the experiments. In order to achieve this goal, different operational parameters of the machine need to be pushed beyond the present design values, including the stored beam energy. One of the main challenges related to the achievement of the upgraded performance is the beam collimation system and its contribution to the overall machine impedance budget. In this perspective, new low impedance collimators have been designed, fabricated, and installed in the LHC. In this study, we will present their detailed electromagnetic (EM) characterization by means of radio frequency (RF) measurements and EM simulations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB235
About •	paper received ※ 19 May 2021 paper accepted ※ 19 July 2021 issue date ※ 10 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Update of the Transverse Proton Synchrotron Impedance Model

3149

S. Joly, N. Mounet, B. Salvant
CERN, Geneva, Switzerland
S. Joly
La Sapienza University of Rome, Rome, Italy
M. Migliorati
INFN-Roma1, Rome, Italy
M. Migliorati
Sapienza University of Rome, Rome, Italy

The CERN Proton Synchrotron (PS) was recently upgraded to allow reaching the ambitious performance goal of the High-Luminosity LHC Project. This upgrade is part of the LHC Injectors Upgrade project. The final part of the upgrade was performed during Long Shutdown 2 (LS2) to allow injection at higher energy from the PS Booster and a twofold increase in beam intensity and brightness. These changes must be considered in the PS impedance model. The effect on the impedance of the removal of obsolete injection equipment, changes of several accelerator components and new injection energy will be reviewed, as well as the wall impedance of the elliptic beam pipe, thanks to a newly developed code that allows taking into account both the ellipticity and the non-ultra-relativistic nature of the beam.

Poster WEPAB224 [0.654 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB224

About •

paper received ※ 17 May 2021 paper accepted ※ 27 July 2021 issue date ※ 17 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB361

New Generation CERN LHC Injection Dump - Assembly and Installation (TDIS)

3548

D. Carbajo Perez, E. Berthomé, C. Bertone, N. Biancacci, C. Bracco, G. Bregliozzi, B. Bulat, C. Cadiou, M. Calviani, G. Cattenoz, A. Cherif, P. Costa Pinto, A. Dallocchio, M. Di Castro, P. Fessia, M.I. Frankl, R. Franqueira Ximenes, J.-F. Fuchs, H. Garcia Gavela, J.-M. Geisser, L. Gentini, S.S. Gilardoni, M.A. Gonzalez De La Aleja Cabana, J.L. Grenard, J.M. Heredia, S. Joly, A. Lechner, J. Lendaro, J. Maestre, E. Page, M. Perez Ornedo, A. Perillo-Marcone, D. Pugnat, E. Rigutto, B. Salvant, A. Sapountzis, K. Scibor, R. Seidenbinder, J. Sola Merino, M. Taborelli, E. Urrutia, A. Vieille, C. Vollinger, C. Yin Vallgren
CERN, Geneva, Switzerland

Funding: Work supported by the Hilumi Project
During CERN’s LS2, several upgrades were performed to beam intercepting devices in the framework of the HL-LHC Project. Upgraded equipment includes two internal beam dumps (TDIS) intended for machine protection located at the injection points from the SPS to the LHC. These two devices have been assembled, tested, and installed around LHC Point 2 and Point 8 and are currently ready to get commissioned with the beam. They are 5.8m-long, three-module-segmented vacuum chambers, with large aperture to accommodate the injected and circulating beam and equipped with absorbing materials, These comprise graphite and higher Z alloys that are embedded on sub-assemblies reinforced with back-stiffeners made of TZM. The current contribution covers three main matters. First, it details the TDIS design and its key technical features. The second topic discussed is the outcome of an experiment where a prototype module was tested under high-energy beam impacts at CERN’s HiRadMat facility. To conclude it is presented the return of experience from the pre-series construction, validation and installation in the LHC tunnel.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB361

About •

paper received ※ 18 May 2021 paper accepted ※ 11 June 2021 issue date ※ 17 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB235

Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators

4258

A. Kurtulus, C. Accentura, N. Biancacci, F. Carra, F. Caspers, N. Chitnis, F. Giordano, R. Illan Fiastre, S. Joly, I. Lamas Garcia, L. Mourier, E. Métral, S. Redaelli, B. Salvant, W. Vollenberg, C. Vollinger, C. Zannini
CERN, Geneva, Switzerland

The High Luminosity Large Hadron Collider (HL-LHC) project will upgrade the LHC machine to allow operation with increased luminosity for the experiments. In order to achieve this goal, different operational parameters of the machine need to be pushed beyond the present design values, including the stored beam energy. One of the main challenges related to the achievement of the upgraded performance is the beam collimation system and its contribution to the overall machine impedance budget. In this perspective, new low impedance collimators have been designed, fabricated, and installed in the LHC. In this study, we will present their detailed electromagnetic (EM) characterization by means of radio frequency (RF) measurements and EM simulations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB235

About •

paper received ※ 19 May 2021 paper accepted ※ 19 July 2021 issue date ※ 10 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)