IPAC2021 - List of Authors (Joly, C.)

Paper	Title	Page
MOPAB205	Minerva (MYRRHA Phase 1) RFQ Beam Commissioning	675
	A. Gatera, J. Belmans, F. Davin, W. De Cock, F. Doucet, L. Parez, F. Pompon, A. Ponton, D. Vandeplassche SCK•CEN, Mol, Belgium F. Bouly LPSC, Grenoble Cedex, France C. Joly, L. Perrot Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France H. Podlech IAP, Frankfurt am Main, Germany J. Tamura JAEA/J-PARC, Tokai-mura, Japan C. Zhang GSI, Darmstadt, Germany
	Funding: Part of this work was supported by the European Commission Framework Programme H₂020, MYRTE project nr. 662186 The MYRRHA project aims at coupling a 600 MeV proton accelerator to a subcritical fission core operating at a thermal power of 60 MW. The nominal proton beam for this ADS has an intensity of 4 mA and is delivered in a quasi-CW mode. Phase 1 of the project will realize a 100 MeV, 4 mA superconducting linac with the mission of ensuring the ADS requirements in terms of reliability and fault tolerance. As part of the reliability optimization program the integrated prototyping of the MINERVA injector is ongoing. The front-end of the injector is composed of an ECR proton source, a 2.6 m long LEBT (low energy beam transport line) and a four-rod RFQ accelerating the beam to 1.5 MeV. The present contribution focuses on the current beam tests on the RFQ, including beam matching, RF conditioning, assessment of the cavities’ performances and accelerated beam characterisation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB205
About •	paper received ※ 19 May 2021 paper accepted ※ 31 May 2021 issue date ※ 24 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Minerva (MYRRHA Phase 1) RFQ Beam Commissioning

675

A. Gatera, J. Belmans, F. Davin, W. De Cock, F. Doucet, L. Parez, F. Pompon, A. Ponton, D. Vandeplassche
SCK•CEN, Mol, Belgium
F. Bouly
LPSC, Grenoble Cedex, France
C. Joly, L. Perrot
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
H. Podlech
IAP, Frankfurt am Main, Germany
J. Tamura
JAEA/J-PARC, Tokai-mura, Japan
C. Zhang
GSI, Darmstadt, Germany

Funding: Part of this work was supported by the European Commission Framework Programme H₂020, MYRTE project nr. 662186
The MYRRHA project aims at coupling a 600 MeV proton accelerator to a subcritical fission core operating at a thermal power of 60 MW. The nominal proton beam for this ADS has an intensity of 4 mA and is delivered in a quasi-CW mode. Phase 1 of the project will realize a 100 MeV, 4 mA superconducting linac with the mission of ensuring the ADS requirements in terms of reliability and fault tolerance. As part of the reliability optimization program the integrated prototyping of the MINERVA injector is ongoing. The front-end of the injector is composed of an ECR proton source, a 2.6 m long LEBT (low energy beam transport line) and a four-rod RFQ accelerating the beam to 1.5 MeV. The present contribution focuses on the current beam tests on the RFQ, including beam matching, RF conditioning, assessment of the cavities’ performances and accelerated beam characterisation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB205

About •

paper received ※ 19 May 2021 paper accepted ※ 31 May 2021 issue date ※ 24 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)