IPAC2021 - List of Authors (Holz, M.)

Paper	Title	Page
THPAB047	Status of Magnetic Measurement Benches for Insertion Device Characterization at MAX IV Laboratory	3848
	M. Ebbeni, M. Gehlot, M. Holz, H. Tarawneh MAX IV Laboratory, Lund University, Lund, Sweden
	Insertion Devices (IDs) are the sole source of radiation used in all beamlines in MAX IV Laboratory with 14 IDs in operation of which 6 were built in-house. This paper shows the current capabilities and performance of the of the ID magnetic measurement systems, and the ongoing development work.
	Poster THPAB047 [1.185 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB047
About •	paper received ※ 11 May 2021 paper accepted ※ 27 July 2021 issue date ※ 28 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB052	Insertion Devices at the MAX IV 3 GeV Ring	3865
	H. Tarawneh, M. Ebbeni, M. Gehlot, M. Holz MAX IV Laboratory, Lund University, Lund, Sweden
	Currently, there are 8 Insertion Devices (ID) installed and in operation and 2 new ones to be installed end of 2021 at the MAX IV 3 GeV storage ring. In this paper, the first commissioning results of the three newly installed IDs in 2020 will be described. The new IDs are one APPLE II for SoftiMAX beamline and two In-vacuum Undulators (IVU) for the DanMAX and CoSAXS beamlines. The mitigation scheme adopted to reduce undulator-like radiation from BALDER in-vacuum wiggler will be discussed. Two new IVUs with a period length of 17 mm and 18 mm for the ForMAX and MicroMAX beamlines will be installed during the winter shutdown of 2021-2022. Both IDs have 3 m lengths and a minimum gap of 4 mm. In this paper, the magnetic measurement results will be presented in terms of the achieved field quality and phase error.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB052
About •	paper received ※ 11 May 2021 paper accepted ※ 02 July 2021 issue date ※ 02 September 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of Magnetic Measurement Benches for Insertion Device Characterization at MAX IV Laboratory

3848

M. Ebbeni, M. Gehlot, M. Holz, H. Tarawneh
MAX IV Laboratory, Lund University, Lund, Sweden

Insertion Devices (IDs) are the sole source of radiation used in all beamlines in MAX IV Laboratory with 14 IDs in operation of which 6 were built in-house. This paper shows the current capabilities and performance of the of the ID magnetic measurement systems, and the ongoing development work.

Poster THPAB047 [1.185 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB047

About •

paper received ※ 11 May 2021 paper accepted ※ 27 July 2021 issue date ※ 28 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB052

Insertion Devices at the MAX IV 3 GeV Ring

3865

H. Tarawneh, M. Ebbeni, M. Gehlot, M. Holz
MAX IV Laboratory, Lund University, Lund, Sweden

Currently, there are 8 Insertion Devices (ID) installed and in operation and 2 new ones to be installed end of 2021 at the MAX IV 3 GeV storage ring. In this paper, the first commissioning results of the three newly installed IDs in 2020 will be described. The new IDs are one APPLE II for SoftiMAX beamline and two In-vacuum Undulators (IVU) for the DanMAX and CoSAXS beamlines. The mitigation scheme adopted to reduce undulator-like radiation from BALDER in-vacuum wiggler will be discussed. Two new IVUs with a period length of 17 mm and 18 mm for the ForMAX and MicroMAX beamlines will be installed during the winter shutdown of 2021-2022. Both IDs have 3 m lengths and a minimum gap of 4 mm. In this paper, the magnetic measurement results will be presented in terms of the achieved field quality and phase error.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB052

About •

paper received ※ 11 May 2021 paper accepted ※ 02 July 2021 issue date ※ 02 September 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)