IPAC2021 - List of Authors (Hernalsteens, C.)

Paper	Title	Page
MOPAB022	FailSim: A Numerical Toolbox for the Study of Fast Failures and Their Impact on Machine Protection at the CERN Large Hadron Collider	111
	C. Hernalsteens, G. Sterbini, O.K. Tuormaa, C. Wiesner, D. Wollmann CERN, Geneva, Switzerland
	The High Luminosity LHC (HL-LHC) foresees to reach a nominal, levelled luminosity of 5·10³⁴ cm^-2 s⁻¹ through a higher beam brightness and by using new equipment, such as larger aperture final focusing quadrupole magnets. The HL-LHC upgrade has critical impacts on the machine protection strategy, as the stored beam energy reaches 700 MJ for each of the two beams. Some failure modes of the novel active superconducting magnet protection system of the inner triplet magnets, namely the Coupling-Loss Induced Quench (CLIQ) systems, have been identified as critical. This paper reports on FailSim, a Python-language framework developed to study the machine protection impact of failure cases and their proposed mitigation. It provides seamless integration of the successive phases required by the simulation studies, i.e., verifying the optics, preparing and running a MAD-X instance for multiple particle tracking, processing and analysing the simulation results and summarising them with the relevant plots to provide a solid estimate of the beam losses, their location and time evolution. The paper also presents and discusses the result of its application on the spurious discharge of a CLIQ unit.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB022
About •	paper received ※ 18 May 2021 paper accepted ※ 31 May 2021 issue date ※ 18 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB416	BDSIM Developments for Hadron Therapy Centre Applications	1252
	E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde ULB, Bruxelles, Belgium S.T. Boogert, L.J. Nevay Royal Holloway, University of London, Surrey, United Kingdom C. Hernalsteens CERN, Geneva, Switzerland W. Shields JAI, Egham, Surrey, United Kingdom
	Hadron therapy centres are evolving towards reduced-footprint layouts, often featuring a single treatment room. The evaluation of beam properties, radiation protection quantities, and concrete shielding activation via numerical simulations poses new challenges that can be tackled using the numerical beam transport and Monte-Carlo code Beam Delivery Simulation (BDSIM), allowing a seamless simulation of the dynamics as a whole. Specific developments have been carried out in BDSIM to advance its efficiency toward such applications, and a detailed 4D Monte-Carlo scoring mechanism has been implemented. It produces tallies such as the spatial-energy differential fluence in arbitrary scoring meshes. The feature makes use of the generic boost::histogram library and allows an event-by-event serialisation and storage in the ROOT data format. The pyg4ometry library is extended to improve the visualisation of critical features such as the complex geometries of BDSIM models, the beam tracks, and the scored quantities. Data are converted from Geant4 and ROOT to a 3D visualisation using the VTK framework. These features are applied to a complete IBA Proteus One model.
	Poster MOPAB416 [1.575 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB416
About •	paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 15 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB214	Recent BDSIM Related Developments and Modeling of Accelerators	4208
	L.J. Nevay, A. Abramov, S.E. Alden, S.T. Boogert, G. D’Alessandro, S.M. Gibson, H. Lefebvre, W. Shields, S.D. Walker JAI, Egham, Surrey, United Kingdom A. Abramov, G. D’Alessandro, C. Hernalsteens CERN, Meyrin, Switzerland E. Gnacadja, C. Hernalsteens, E. Ramoisiaux, R. Tesse ULB, Bruxelles, Belgium S. Liu DESY, Hamburg, Germany
	Funding: This work is supported by the STFC (UK) grants: JAI ST/P00203X/1, HL-LHC-UK1 ST/N001583/1, HL-LHC-UK2 ST/T001925/1, and ST/P003028/1. Beam Delivery Simulation (BDSIM) is a program based on Geant4 that creates 3D radiation transport models of accelerators from a simple optical description in a vastly reduced time frame with great flexibility. It also uses ROOT and CLHEP to create a single simulation model that can accurately track all particle species in an accelerator to predict and understand beam losses, secondary radiation, dosimetric quantities and their origin. BDSIM provides a library of scalable generic geometry for a variety of applications. Our Python package, Pyg4ometry, allows rapid preparation and conversion of geometries for BDSIM and other radiation transport simulations including FLUKA. We present a broad overview of BDSIM developments related to a variety of experiments at several facilities. We present a model of the forward experiment FASER at the LHC, CERN where the geometry is composited from multiple sources using Pyg4ometry. The analysis of particle history is presented as well as production mechanisms. We also present the application of recently introduced laser interactions in Geant4 to Compton photons from a laserwire diagnostic at the ATF2.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB214
About •	paper received ※ 20 May 2021 paper accepted ※ 19 July 2021 issue date ※ 22 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

FailSim: A Numerical Toolbox for the Study of Fast Failures and Their Impact on Machine Protection at the CERN Large Hadron Collider

111

C. Hernalsteens, G. Sterbini, O.K. Tuormaa, C. Wiesner, D. Wollmann
CERN, Geneva, Switzerland

The High Luminosity LHC (HL-LHC) foresees to reach a nominal, levelled luminosity of 5·10³⁴ cm^-2 s⁻¹ through a higher beam brightness and by using new equipment, such as larger aperture final focusing quadrupole magnets. The HL-LHC upgrade has critical impacts on the machine protection strategy, as the stored beam energy reaches 700 MJ for each of the two beams. Some failure modes of the novel active superconducting magnet protection system of the inner triplet magnets, namely the Coupling-Loss Induced Quench (CLIQ) systems, have been identified as critical. This paper reports on FailSim, a Python-language framework developed to study the machine protection impact of failure cases and their proposed mitigation. It provides seamless integration of the successive phases required by the simulation studies, i.e., verifying the optics, preparing and running a MAD-X instance for multiple particle tracking, processing and analysing the simulation results and summarising them with the relevant plots to provide a solid estimate of the beam losses, their location and time evolution. The paper also presents and discusses the result of its application on the spurious discharge of a CLIQ unit.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB022

About •

paper received ※ 18 May 2021 paper accepted ※ 31 May 2021 issue date ※ 18 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB416

BDSIM Developments for Hadron Therapy Centre Applications

1252

E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde
ULB, Bruxelles, Belgium
S.T. Boogert, L.J. Nevay
Royal Holloway, University of London, Surrey, United Kingdom
C. Hernalsteens
CERN, Geneva, Switzerland
W. Shields
JAI, Egham, Surrey, United Kingdom

Hadron therapy centres are evolving towards reduced-footprint layouts, often featuring a single treatment room. The evaluation of beam properties, radiation protection quantities, and concrete shielding activation via numerical simulations poses new challenges that can be tackled using the numerical beam transport and Monte-Carlo code Beam Delivery Simulation (BDSIM), allowing a seamless simulation of the dynamics as a whole. Specific developments have been carried out in BDSIM to advance its efficiency toward such applications, and a detailed 4D Monte-Carlo scoring mechanism has been implemented. It produces tallies such as the spatial-energy differential fluence in arbitrary scoring meshes. The feature makes use of the generic boost::histogram library and allows an event-by-event serialisation and storage in the ROOT data format. The pyg4ometry library is extended to improve the visualisation of critical features such as the complex geometries of BDSIM models, the beam tracks, and the scored quantities. Data are converted from Geant4 and ROOT to a 3D visualisation using the VTK framework. These features are applied to a complete IBA Proteus One model.

Poster MOPAB416 [1.575 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB416

About •

paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 15 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB214

Recent BDSIM Related Developments and Modeling of Accelerators

4208

L.J. Nevay, A. Abramov, S.E. Alden, S.T. Boogert, G. D’Alessandro, S.M. Gibson, H. Lefebvre, W. Shields, S.D. Walker
JAI, Egham, Surrey, United Kingdom
A. Abramov, G. D’Alessandro, C. Hernalsteens
CERN, Meyrin, Switzerland
E. Gnacadja, C. Hernalsteens, E. Ramoisiaux, R. Tesse
ULB, Bruxelles, Belgium
S. Liu
DESY, Hamburg, Germany

Funding: This work is supported by the STFC (UK) grants: JAI ST/P00203X/1, HL-LHC-UK1 ST/N001583/1, HL-LHC-UK2 ST/T001925/1, and ST/P003028/1.
Beam Delivery Simulation (BDSIM) is a program based on Geant4 that creates 3D radiation transport models of accelerators from a simple optical description in a vastly reduced time frame with great flexibility. It also uses ROOT and CLHEP to create a single simulation model that can accurately track all particle species in an accelerator to predict and understand beam losses, secondary radiation, dosimetric quantities and their origin. BDSIM provides a library of scalable generic geometry for a variety of applications. Our Python package, Pyg4ometry, allows rapid preparation and conversion of geometries for BDSIM and other radiation transport simulations including FLUKA. We present a broad overview of BDSIM developments related to a variety of experiments at several facilities. We present a model of the forward experiment FASER at the LHC, CERN where the geometry is composited from multiple sources using Pyg4ometry. The analysis of particle history is presented as well as production mechanisms. We also present the application of recently introduced laser interactions in Geant4 to Compton photons from a laserwire diagnostic at the ATF2.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB214

About •

paper received ※ 20 May 2021 paper accepted ※ 19 July 2021 issue date ※ 22 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)