Author: Hasse, Q.B.
Paper Title Page
THPAB053 Magnetic Field Calculation of Planar SCUs Using ANSYS Maxwell 3868
 
  • Y. Shiroyanagi, E.A. Anliker, Q.B. Hasse, H. Hu, Y. Ivanyushenkov, M. Kasa, I. Kesgin
    ANL, Lemont, Illinois, USA
 
  Funding: This work was supported by U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
The Advanced Photon Source (APS) Upgrade includes a 4.8-m-long superconducting undulator (SCU) cryostat containing two 1.9-m-long, 16.5-mm-period planar NbTi undulator magnets. The magnetic and mechanical design of this magnet follows the design of the existing 1.1-m-long, 18-mm-period planar SCU that is currently in operation at the APS *. Although OPERA is a reliable standard software tool for magnetic field calculations, ANSYS Maxwell 3D has the advantage of calculating a large and complex geometry. In this paper, first, the magnetic field map, including the peak field and end fields, is bench-marked against the magnetic measurement data of the existing planar SCU18-1. Then, corrector current optimization is presented for the 1.5-m-long, 21-mm-period planar SCU. Finally, a magnetic field model of a full-scale, 1.9-m-long planar SCU is presented.
* Y. Ivanyushenkov et al., Phys. Rev. Accel. Beams 20, 100701 (2017).
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB053  
About • paper received ※ 18 May 2021       paper accepted ※ 18 June 2021       issue date ※ 11 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAB054 Measurement Results of the First Scape Prototype 3872
 
  • M. Kasa, E.A. Anliker, Q.B. Hasse, Y. Ivanyushenkov, I. Kesgin, Y. Shiroyanagi, E. Trakhtenberg
    ANL, Lemont, Illinois, USA
 
  Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
The SCAPE (SuperConducting Arbitrarily Polarizing Emitter) undulator is under development at the Advanced Photon Source (APS) as a part of the APS upgrade. SCAPE is comprised of four superconducting magnets which are arranged to create an on-axis undulator field that can be planar, elliptical, or circular. As a first step towards developing a full length device, a 0.5-meter long prototype was manufactured and assembled for testing in a liquid helium bath cryostat. A description of the mechanical assembly and subsequent measurement results of the first prototype will be presented in this paper.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB054  
About • paper received ※ 19 May 2021       paper accepted ※ 01 September 2021       issue date ※ 22 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)