Author: Hashimoto, S.
Paper Title Page
WEPAB039 Construction of a Compact Electron Injector Using a Gridded RF Thermionic Gun and a C-Band Accelerator 2687
 
  • T. Inagaki, T. Asaka, T. Hara, T. Hiraiwa, N. Hosoda, E. Iwai, C. Kondo, H. Maesaka, T. Ohshima, H. Tanaka
    RIKEN SPring-8 Center, Hyogo, Japan
  • H. Dewa, T. Magome, Y. Minagawa, T. Sakurai
    JASRI/SPring-8, Hyogo, Japan
  • T. Fukui
    RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
  • S. Hashimoto
    LASTI, Hyogo, Japan
  • S.I. Inoue, K. Kajimoto, S. Nakata, T. Seno, H. Sumitomo, R. Takesako, S. Tanaka, R. Yamamoto, M. Yoshioka
    SES, Hyogo-pref., Japan
  • K. Yanagida
    JASRI, Hyogo, Japan
 
  A compact and low-cost 1 GeV injector linac was designed and constructed to provide injection beams to the soft X-ray synchrotron radiation facility NewSUBARU instead of the SPring-8 injector system, which will be shutdown. The total length of the injector linac needs to be less than 70 m to fit into the existing tunnel. To this end, an RF electron gun with a gridded thermionic cathode directly attached to a 238 MHz RF cavity was developed and adopted. The 500 keV, 0.6 ns, 1 nC beam emitted from the cavity is compressed to 3 ps by velocity bunching driven by a 476 MHz RF cavity and a S-band RF structure. The short-pulsed beams are accelerated up to 1 GeV with 16 C-band RF structures. In the C-band accelerator section, the klystron output of 50 MW is multiplied 4 times by a pulse compressor and fed to the 4 RF structures to generate a high accelerating field of 31 MV/m. A low-level RF system consisting of a MTCA.4 based high-speed digitizers and RF frontend boards has been constructed. This injector system is used at the 3 GeV SR facility currently under construction in Sendai. In this paper, we report the design outline and the operational performance of the injector system.  
poster icon Poster WEPAB039 [2.419 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB039  
About • paper received ※ 20 May 2021       paper accepted ※ 02 July 2021       issue date ※ 24 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)